B41851A8228M000

B41851A8228M000 Datasheet

Series/Type B41851, B43851

Part	Datasheet
B41851A8228M000	B41851A8228M000 (pdf)

Related Parts	Information
B41851A5107M7	B41851A5107M7
B43851A5107M000	B43851A5107M000
B41851A3107M	B41851A3107M
B41851A3107M7	B41851A3107M7
B41851A3107M8	B41851A3107M8
B41851A3227M8	B41851A3227M8
B41851A9108M000	B41851A9108M000
B41851A4107M8	B41851A4107M8
B43851A1335M	B43851A1335M
B41851A5107M8	B41851A5107M8
B41851A5476M	B41851A5476M
B41851A5476M7	B41851A5476M7
B41851A6105M7	B41851A6105M7
B41851A6105M	B41851A6105M
B41851A6105M8	B41851A6105M8
B41851A4107M	B41851A4107M
B43851A1225M	B43851A1225M
B43851A2225M	B43851A2225M
B43851A2335M	B43851A2335M
B43851A4105M	B43851A4105M
B43851A4474M	B43851A4474M
B43851F2105M	B43851F2105M
B41851A2337M7	B41851A2337M7
B43851F2474M	B43851F2474M
B43851A2105M	B43851A2105M
B43851F2337M000	B43851F2337M000
B41851A5109M000	B41851A5109M000
B43851A1105M	B43851A1105M
B41851A6478M000	B41851A6478M000
B43851A1474M	B43851A1474M
B41851A6106M	B41851A6106M
B43851F2225M	B43851F2225M
B41851A6106M7	B41851A6106M7
B41851A8226M7	B41851A8226M7
B41851A8226M8	B41851A8226M8
B41851A9104M	B41851A9104M
B41851A9105M	B41851A9105M
B41851A9105M8	B41851A9105M8
B41851A9106M8	B41851A9106M8
B41851A9224M	B41851A9224M
B41851A9224M8	B41851A9224M8
B41851A9225M	B41851A9225M
B41851A8106M8	B41851A8106M8
B41851A9334M	B41851A9334M
B41851A9335M	B41851A9335M
B41851A9474M	B41851A9474M
B41851A5476M8	B41851A5476M8
B41851A9475M8	B41851A9475M8
B41851F4227M7	B41851F4227M7
B41851F7107M7	B41851F7107M7
B41851F7107M8	B41851F7107M8
B41851A4109M000	B41851A4109M000
B43851A1105M8	B43851A1105M8
B43851A1335M7	B43851A1335M7
B43851F2225M8	B43851F2225M8
B41851A9225M8	B41851A9225M8
B41851A6475M7	B41851A6475M7
B41851A6225M7	B41851A6225M7
B41851A8106M7	B41851A8106M7
B41851A6225M	B41851A6225M
B41851A6226M7	B41851A6226M7
B41851A6226M8	B41851A6226M8
B41851A6335M	B41851A6335M
B41851A6335M8	B41851A6335M8
B41851A6225M8	B41851A6225M8
B41851A6475M	B41851A6475M
B41851A6226M	B41851A6226M
B41851A6475M8	B41851A6475M8
B41851A6476M8	B41851A6476M8
B41851A7336M	B41851A7336M
B41851A9475M	B41851A9475M
B41851A6106M8	B41851A6106M8
B41851A7476M	B41851A7476M
B41851A7476M8	B41851A7476M8
B41851A8106M	B41851A8106M
B41851A6336M8	B41851A6336M8
B41851A9106M	B41851A9106M
B41851A2227M	B41851A2227M
B41851F4227M	B41851F4227M
B41851A8336M	B41851A8336M
B41851A8226M	B41851A8226M
B41851A6476M	B41851A6476M
B41851A6336M	B41851A6336M
B41851A5107M	B41851A5107M
B41851A2337M	B41851A2337M
B41851F7107M	B41851F7107M

PDF Datasheet Preview
Aluminum electrolytic capacitors Single-ended capacitors Series/Type B41851, B43851 The following products presented in this data sheet are being withdrawn. Ordering Code see following page Substitute Product Date of Withdrawal Deadline Last Orders 2013-10-18 2014-01-18 Last Shipments 2014-04-18 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Affected products Ordering code B41851A2227* B41851A2337* B41851A3107* B41851A3227* B41851A4107* B41851A4686* B41851A5107* B41851A5476* B41851A6105* B41851A6106* B41851A6225* B41851A6226* B41851A6335* B41851A6336* B41851A6475* B41851A6476* B41851A6685* B41851A7336* B41851A7476* B41851A7686* B41851A8106* B41851A8226* B41851A8336* B41851A9104* B41851A9105* B41851A9106* B41851A9224* B41851A9225* B41851A9334* B41851A9335* B41851A9474* B41851A9475* B41851A9684* B41851B6106* B41851F4227* B41851F5686* B41851F6686* B41851F7107* B41851F8226* B41851F8476* B41851S3227* B41851S5157* B41851S6476* B41851S7107* B41851S7476* B43851A1105* B43851A1225* B43851A1335* B43851A1474* B43851A2105* B43851A2225* B43851A2335* B43851A2474* B43851A4105* B43851A4474* B43851A4684* B43851F1475* B43851F2105* B43851F2225* B43851F2474* B43851F2684* B43851F4225* B43851G2475* B43851K2335* Single-ended capacitors Standard series 105 °C General-purpose grade capacitors Applications General-purpose applications in the entertainment industry Semi-professional to professional application range For filtering, coupling and pulse circuits Switch-mode power supplies Features Compact dimensions High CV product, i.e. very compact RoHS-compatible Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent from diameter mm Delivery mode Terminal configurations and packing: Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details. B41851, B43851 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 36 B41851, B43851 Standard series 105 °C Specifications and characteristics in brief Series Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz B41851 B43851 100 V DC 160 450 V DC VR 10000 µF VR 680 µF ±20% M ±20% M For capacitance higher than 1000 µF add for every increase of 1000 µF. Leakage current Ileak 20 °C, 5 min Self-inductance ESL Useful life 105 °C VR IAC,R 40 °C VR IAC,R 40 °C VR IAC,R Requirements Voltage endurance test 105 °C VR VR V DC tan max. 10 16 25 35 50 63 100 160 450 or 3 µA, whichever is greater Diameter mm ESL nH > 2000 h > 250000 h > 3000 h > 250000 h Technical data and ordering codes B41851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = V DC 1000 1500 10 x 16 2200 10 x 20 3300 10 x 20 4700 VR = 10 V DC 5 x 11 1000 1500 10 x 20 2200 10 x 20 3300 4700 16 x 20 6800 16 x 25 10000 ESRmax 120 Hz 20 °C IAC,R 120 Hz 105 °C mA 195 265 295 455 525 710 840 1120 105 175 220 280 330 460 510 760 1085 1190 1575 1820 IAC,max 120 Hz 85 °C mA 275 370 413 635 735 995 1175 1570 150 245 310 390 460 645 715 1065 1520 1665 2205 2250 Ordering code composition see below B41851A2337M* B41851B2477M* B41851F2687M* B41851A2108M* B41851F2158M* B41851A2228M* B41851A2338M* B41851A2478M* B41851A3107M* B41851A3227M* B41851B3337M* B41851A3477M* B41851A3687M* B41851A3108M* B41851A3158M* B41851A3228M* B41851A3338M* B41851A3478M* B41851F3688M* B41851F3109M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 36 B41851 Standard series 105 °C Technical data and ordering codes B41851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 16 V DC 5 x 11 1000 10 x 16 1500 10 x 20 2200 3300 3300 16 x 25 4700 16 x 25 6800 10000 18 x 35 VR = 25 V DC 5 x 11 5 x 11 10 x 16 ESRmax 120 Hz 20 °C IAC,R 120 Hz 105 °C mA 115 190 265 315 390 560 650 920 1170 1260 1500 1600 1950 83 90 140 240 310 320 380 440 IAC,max 120 Hz 85 °C mA 160 265 370 440 545 785 910 1290 1640 1765 2100 2240 2730 116 126 195 335 435 450 530 615 Ordering code composition see below B41851A4107M* B41851F4227M* B41851B4337M* B41851K4477M* B41851F4687M* B41851A4108M* B41851F4158M* B41851F4228M* B41851F4338M* B41851A4338M* B41851A4478M* B41851F4688M* B41851F4109M* B41851A5476M* B41851F5686M* B41851A5107M* B41851B5227M* B41851F5337M* B41851A5337M* B41851F5477M* B41851F5687M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 36 B41851 Standard series 105 °C Technical data and ordering codes B41851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 25 V DC 1000 10 x 20 1500 2200 3300 16 x 25 4700 6800 18 x 35 10000 20 x 40 VR = 35 V DC 5 x 11 5 x 11 10 x 16 10 x 20 1000 1500 16 x 20 2200 16 x 25 3300 4700 18 x 35 6800 18 x 40 ESRmax 120 Hz 20 °C IAC,R 120 Hz 105 °C mA 680 770 1090 1400 1700 1850 2050 75 93 110 150 270 350 460 590 810 980 1260 1500 1780 2000 IAC,max 120 Hz 85 °C mA 950 1080 1525 1960 2380 2590 2870 105 130 155 210 380 490 645 825 1135 1370 1765 2100 2490 2800 Ordering code composition see below B41851A5108M* B41851F5158M* B41851F5228M* B41851A5338M* B41851A5478M* B41851F5688M* B41851F5109M* B41851A7336M* B41851A7476M* B41851A7686M* B41851F7107M* B41851F7227M* B41851A7337M* B41851A7477M* B41851A7687M* B41851F7108M* B41851F7158M* B41851F7228M* B41851F7338M* B41851K7478M* B41851K7688M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 36 B41851 Standard series 105 °C Technical data and ordering codes B41851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 50 V DC 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 10 x 16 10 x 20 1000 1500 16 x 25 2200 2200 18 x 35 3300 18 x 35 4700 20 x 40 ESRmax 120 Hz 20 °C 199 90 60 42 20 IAC,R 120 Hz 105 °C mA 13 20 25 30 46 67 90 115 150 190 300 410 540 700 950 1260 1410 1540 1770 2100 IAC,max 120 Hz 85 °C mA 18 28 35 42 65 94 126 160 210 265 420 575 755 980 1330 1765 1975 2155 2480 2940 Ordering code composition see below B41851A6105M* B41851A6225M* B41851A6335M* B41851A6475M* B41851B6106M* B41851A6226M* B41851A6336M* B41851A6476M* B41851F6686M* B41851A6107M* B41851A6227M* B41851A6337M* B41851A6477M* B41851F6687M* B41851F6108M* B41851F6158M* B41851F6228M* B41851A6228M* B41851K6338M* B41851K6478M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 36 B41851 Standard series 105 °C Technical data and ordering codes B41851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 63 V DC 5 x 11 5 x 11 10 x 16 10 x 20 16 x 20 1000 16 x 25 1500 2200 18 x 35 3300 20 x 40 4700 25 x 40 ESRmax 120 Hz 20 °C IAC,R 120 Hz 105 °C mA 46 70 100 120 155 200 335 510 640 770 930 1260 1650 1950 2250 IAC,max 120 Hz 85 °C mA 65 100 140 170 220 280 470 715 895 1080 1300 1765 2310 2730 3150 Ordering code composition see below B41851A8106M* B41851F8226M* B41851A8336M* B41851F8476M* B41851F8686M* B41851F8107M* B41851A8227M* B41851A8337M* B41851F8477M* B41851F8687M* B41851F8108M* B41851F8158M* B41851K8228M* B41851A8338M* B41851F8478M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 36 B41851 Standard series 105 °C Technical data and ordering codes B41851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 100 V DC 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 10 x 16 10 x 20 16 x 25 18 x 40 1000 18 x 40 ESRmax 120 Hz 20 °C 1658 754 502 353 244 166 75 50 35 17 IAC,R 120 Hz 105 °C mA 15 21 29 32 53 98 125 135 160 195 245 435 560 700 770 950 IAC,max 120 Hz 85 °C mA 10 13 21 30 41 45 74 137 175 190 225 275 345 610 785 980 1080 1330 Ordering code composition see below B41851A9104M* B41851A9224M* B41851A9334M* B41851A9474M* B41851A9684M* B41851A9105M* B41851A9225M* B41851A9335M* B41851A9475M* B41851A9106M* B41851B9226M* B41851F9336M* B41851A9336M* B41851B9476M* B41851A9686M* B41851A9107M* B41851A9227M* B41851A9337M* B41851A9477M* B41851F9687M* B41851F9108M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 36 B43851 Standard series 105 °C Technical data and ordering codes B43851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 160 V DC 10 x 16 10 x 16 10 x 20 10 x 20 16 x 25 18 x 35 20 x 40 25 x 40 ESRmax 120 Hz 20 °C 186 85 56 40 18 13 IAC,R 120 Hz 105 °C mA 16 23 28 35 56 91 108 125 143 150 188 250 300 332 532 560 695 910 1000 IAC,max 120 Hz 85 °C mA 27 39 48 60 95 155 184 213 243 255 320 425 510 564 904 952 1182 1547 1700 Ordering code composition see below B43851A1105M* B43851A1225M* B43851A1335M* B43851F1475M* B43851F1106M* B43851F1226M* B43851A1226M* B43851F1336M* B43851A1336M* B43851K1476M* B43851F1476M* B43851K1686M* B43851F1107M* B43851A1107M* B43851F1227M* B43851A1227M* B43851F1337M* B43851F1477M* B43851G1687M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 36 B43851 Standard series 105 °C Technical data and ordering codes B43851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 200 V DC 10 x 16 10 x 20 16 x 25 20 x 35 22 x 40 VR = 250 V DC 10 x 20 ESRmax 120 Hz 20 °C 186 85 56 40 21 395 273 186 85 65 40 23 IAC,R 120 Hz 105 °C mA 16 23 28 35 56 108 144 190 245 332 560 650 760 11 13 16 23 35 38 66 120 IAC,max 120 Hz 85 °C mA 27 39 48 60 95 184 245 323 417 564 952 1105 1292 19 22 27 39 60 65 112 204 Ordering code composition see below B43851A2105M* B43851A2225M* B43851A2335M* B43851G2475M* B43851G2106M* B43851K2226M* B43851B2336M* B43851R2476M* B43851K2686M* B43851A2107M* B43851B2227M* B43851R2337M* B43851R2477M* B43851F2474M* B43851F2684M* B43851F2105M* B43851F2225M* B43851K2335M* B43851P2475M* B43851K2106M* B43851F2226M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 36 B43851 Standard series 105 °C Technical data and ordering codes B43851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 250 V DC 16 x 25 18 x 40 22 x 40 VR = 350 V DC 10 x 16 16 x 25 18 x 35 ESRmax 120 Hz 20 °C 395 273 186 97 85 65 45 21 IAC,R 120 Hz 105 °C mA 161 203 266 364 476 658 10 12 15 23 26 30 38 70 140 168 210 290 364 IAC,max 120 Hz 85 °C mA 274 345 452 619 809 1119 17 20 26 39 44 51 65 119 238 286 357 493 619 Ordering code composition see below B43851K2336M* B43851G2476M* B43851F2686M* B43851K2107M* B43851F2227M* B43851F2337M* B43851A4474M* B43851A4684M* B43851A4105M* B43851F4225M* B43851B4225M* B43851F4335M* B43851F4475M* B43851F4106M* B43851F4226M* B43851F4336M* B43851F4476M* B43851F4686M* B43851F4107M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 36 B43851 Standard series 105 °C Technical data and ordering codes B43851 CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 400 V DC 10 x 20 16 x 20 16 x 25 18 x 40 VR = 450 V DC 10 x 20 16 x 25 18 x 35 20 x 40 ESRmax 120 Hz 20 °C 97 65 46 18 97 65 45 26 14 IAC,R 120 Hz 105 °C mA 26 36 56 80 140 168 196 294 310 20 28 32 56 100 125 155 193 207 IAC,max 120 Hz 85 °C mA 44 61 95 136 238 286 333 500 527 34 48 54 95 170 213 264 328 352 Ordering code composition see below B43851H9225M* B43851F9335M* B43851F9475M* B43851A9106M* B43851F9226M* B43851F9336M* B43851F9476M* B43851A9686M* B43851K9107M* B43851F5225M* B43851F5335M* B43851K5475M* B43851F5106M* B43851F5226M* B43851F5336M* B43851F5476M* B43851A5686M* B43851A5107M* Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and 18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 36 B41851, B43851 Standard series 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 VR = 100 V DC VR = 160 450 V DC 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 36 Frequency factor of permissible ripple current IAC versus frequency f VR 100 V DC B41851, B43851 Standard series 105 °C Frequency factor of permissible ripple current IAC versus frequency f VR 160 V DC Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 36 B41851, B43851 Standard series 105 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 8 to 18 mm as follows Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 Dimensions in mm W0 W1 W2 P Tolerance min. max. Leads can also run straight through the taping area. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 36 Lead spacing mm d = 8 mm Last 3 digits of ordering code 008 B41851, B43851 Standard series 105 °C Lead spacing mm d = 10 mm Last 3 digits of ordering code 008 Dimensions in mm W W0 W1 W2 H0 P Tolerance min. max. Taping is available up to dimensions d x l = x 25 mm. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 36 B41851, B43851 Standard series 105 °C Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. Taping is available up to dimensions d x l = 16 x mm and 18 x mm. Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 36 B41851, B43851 Standard series 105 °C Cut or kinked leads Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request. Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 36 B41851, B43851 Standard series 105 °C Kinked leads Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 36 B41851, B43851 Standard series 105 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm excluding d x l = x 30/35/40 mm . There are three configurations available Crimped leads, J leads, bent 90° leads Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 36 B41851, B43851 Standard series 105 °C J leads Last 3 digits of ordering code 004 Suggestion for PCB hole diameter Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 36 B41851, B43851 Standard series 105 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 27 of 36 B41851, B43851 Standard series 105 °C Packing units and box dimensions Ammo pack Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 Bmax 55 Cmax 240 345 55 280 345 60 200 345 60 200 345 65 280 345 65 280 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 1000 750 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 28 of 36 B41851, B43851 Standard series 105 °C Overview of packing units and code numbers for case sizes 8 x 16 x Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000 Taped, Ammo pack pcs. 1000 Code F mm d mm 006 008 5 009 Kinked leads, bulk pcs. 500 350 500 200 250 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 216 250 344 344 180 100 150 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 29 of 36 B41851, B43851 Standard series 105 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 000 Taped, Ammo pack pcs. 250 Code F mm d mm 009 Kinked leads, bulk pcs. 175 150 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 30 of 36 B41851, B43851 Standard series 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS Material Data Sheets are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS Material Safety Data Sheets are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 31 of 36 B41851, B43851 Standard series 105 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting of single-ended capacitors Soldering, cleaning agents Upper category temperature Passive flammability Safety information

PDF Datasheet Preview

Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type B41851, B43851

The following products presented in this data sheet are being withdrawn.
Ordering Code see following page

Substitute Product

Date of Withdrawal Deadline Last Orders
2013-10-18
2014-01-18

Last Shipments 2014-04-18

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.
Affected products Ordering code

B41851A2227* B41851A2337* B41851A3107* B41851A3227* B41851A4107* B41851A4686* B41851A5107* B41851A5476* B41851A6105* B41851A6106* B41851A6225* B41851A6226* B41851A6335* B41851A6336* B41851A6475* B41851A6476* B41851A6685*

B41851A7336* B41851A7476* B41851A7686* B41851A8106* B41851A8226* B41851A8336* B41851A9104* B41851A9105* B41851A9106* B41851A9224* B41851A9225* B41851A9334* B41851A9335* B41851A9474* B41851A9475* B41851A9684* B41851B6106*

B41851F4227* B41851F5686* B41851F6686* B41851F7107* B41851F8226* B41851F8476* B41851S3227* B41851S5157* B41851S6476* B41851S7107* B41851S7476* B43851A1105* B43851A1225* B43851A1335* B43851A1474* B43851A2105* B43851A2225*

B43851A2335* B43851A2474* B43851A4105* B43851A4474* B43851A4684* B43851F1475* B43851F2105* B43851F2225* B43851F2474* B43851F2684* B43851F4225* B43851G2475* B43851K2335*

Single-ended capacitors Standard series 105 °C

General-purpose grade capacitors

Applications General-purpose applications in the entertainment industry Semi-professional to professional application range For filtering, coupling and pulse circuits Switch-mode power supplies

Features Compact dimensions High CV product, i.e. very compact RoHS-compatible

Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent from diameter mm

Delivery mode Terminal configurations and packing:

Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details.

B41851, B43851

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 36

B41851, B43851 Standard series 105 °C

Specifications and characteristics in brief

Series Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz

B41851

B43851
100 V DC
160 450 V DC

VR 10000 µF

VR 680 µF
±20% M
±20% M

For capacitance higher than 1000 µF add for every increase of
1000 µF.

Leakage current Ileak 20 °C, 5 min

Self-inductance ESL

Useful life 105 °C VR IAC,R
40 °C VR IAC,R 40 °C VR IAC,R Requirements

Voltage endurance test 105 °C VR

VR V DC tan max.
10 16 25 35 50 63 100 160 450
or 3 µA, whichever is greater

Diameter mm

ESL nH
> 2000 h > 250000 h
> 3000 h
> 250000 h
Technical data and ordering codes B41851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = V DC
1000
1500
10 x 16
2200
10 x 20
3300
10 x 20
4700

VR = 10 V DC
5 x 11
1000
1500
10 x 20
2200
10 x 20
3300
4700
16 x 20
6800
16 x 25
10000

ESRmax 120 Hz 20 °C

IAC,R 120 Hz 105 °C mA
195 265 295 455 525 710 840 1120
105 175 220 280 330 460 510 760 1085 1190 1575 1820

IAC,max 120 Hz 85 °C mA
275 370 413 635 735 995 1175 1570
150 245 310 390 460 645 715 1065 1520 1665 2205 2250
Ordering code composition see below

B41851A2337M*** B41851B2477M*** B41851F2687M*** B41851A2108M*** B41851F2158M*** B41851A2228M*** B41851A2338M*** B41851A2478M***

B41851A3107M*** B41851A3227M*** B41851B3337M*** B41851A3477M*** B41851A3687M*** B41851A3108M*** B41851A3158M*** B41851A3228M*** B41851A3338M*** B41851A3478M*** B41851F3688M*** B41851F3109M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 36

B41851 Standard series 105 °C
Technical data and ordering codes B41851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 16 V DC
5 x 11
1000
10 x 16
1500
10 x 20
2200
3300
3300
16 x 25
4700
16 x 25
6800
10000
18 x 35

VR = 25 V DC
5 x 11
5 x 11
10 x 16

ESRmax 120 Hz 20 °C

IAC,R 120 Hz 105 °C mA
115 190 265 315 390 560 650 920 1170 1260 1500 1600 1950
83 90 140 240 310 320 380 440

IAC,max 120 Hz 85 °C mA
160 265 370 440 545 785 910 1290 1640 1765 2100 2240 2730
116 126 195 335 435 450 530 615
Ordering code composition see below

B41851A4107M*** B41851F4227M*** B41851B4337M*** B41851K4477M*** B41851F4687M*** B41851A4108M*** B41851F4158M*** B41851F4228M*** B41851F4338M*** B41851A4338M*** B41851A4478M*** B41851F4688M*** B41851F4109M***

B41851A5476M*** B41851F5686M*** B41851A5107M*** B41851B5227M*** B41851F5337M*** B41851A5337M*** B41851F5477M*** B41851F5687M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 36

B41851 Standard series 105 °C
Technical data and ordering codes B41851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 25 V DC
1000
10 x 20
1500
2200
3300
16 x 25
4700
6800
18 x 35
10000
20 x 40

VR = 35 V DC
5 x 11
5 x 11
10 x 16
10 x 20
1000
1500
16 x 20
2200
16 x 25
3300
4700
18 x 35
6800
18 x 40

ESRmax 120 Hz 20 °C

IAC,R 120 Hz 105 °C mA
680 770 1090 1400 1700 1850 2050
75 93 110 150 270 350 460 590 810 980 1260 1500 1780 2000

IAC,max 120 Hz 85 °C mA
950 1080 1525 1960 2380 2590 2870
105 130 155 210 380 490 645 825 1135 1370 1765 2100 2490 2800
Ordering code composition see below

B41851A5108M*** B41851F5158M*** B41851F5228M*** B41851A5338M*** B41851A5478M*** B41851F5688M*** B41851F5109M***

B41851A7336M*** B41851A7476M*** B41851A7686M*** B41851F7107M*** B41851F7227M*** B41851A7337M*** B41851A7477M*** B41851A7687M*** B41851F7108M*** B41851F7158M*** B41851F7228M*** B41851F7338M*** B41851K7478M*** B41851K7688M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 36

B41851 Standard series 105 °C
Technical data and ordering codes B41851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 50 V DC
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
10 x 16
10 x 20
1000
1500
16 x 25
2200
2200
18 x 35
3300
18 x 35
4700
20 x 40

ESRmax 120 Hz 20 °C
199 90 60 42 20

IAC,R 120 Hz 105 °C mA
13 20 25 30 46 67 90 115 150 190 300 410 540 700 950 1260 1410 1540 1770 2100

IAC,max 120 Hz 85 °C mA
18 28 35 42 65 94 126 160 210 265 420 575 755 980 1330 1765 1975 2155 2480 2940
Ordering code composition see below

B41851A6105M*** B41851A6225M*** B41851A6335M*** B41851A6475M*** B41851B6106M*** B41851A6226M*** B41851A6336M*** B41851A6476M*** B41851F6686M*** B41851A6107M*** B41851A6227M*** B41851A6337M*** B41851A6477M*** B41851F6687M*** B41851F6108M*** B41851F6158M*** B41851F6228M*** B41851A6228M*** B41851K6338M*** B41851K6478M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 36

B41851 Standard series 105 °C
Technical data and ordering codes B41851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 63 V DC
5 x 11
5 x 11
10 x 16
10 x 20
16 x 20
1000
16 x 25
1500
2200
18 x 35
3300
20 x 40
4700
25 x 40

ESRmax 120 Hz 20 °C

IAC,R 120 Hz 105 °C mA
46 70 100 120 155 200 335 510 640 770 930 1260 1650 1950 2250

IAC,max 120 Hz 85 °C mA
65 100 140 170 220 280 470 715 895 1080 1300 1765 2310 2730 3150
Ordering code composition see below

B41851A8106M*** B41851F8226M*** B41851A8336M*** B41851F8476M*** B41851F8686M*** B41851F8107M*** B41851A8227M*** B41851A8337M*** B41851F8477M*** B41851F8687M*** B41851F8108M*** B41851F8158M*** B41851K8228M*** B41851A8338M*** B41851F8478M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 36

B41851 Standard series 105 °C
Technical data and ordering codes B41851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 100 V DC
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
10 x 16
10 x 20
16 x 25
18 x 40
1000
18 x 40

ESRmax 120 Hz 20 °C
1658 754 502 353 244 166 75 50 35 17

IAC,R 120 Hz 105 °C mA
15 21 29 32 53 98 125 135 160 195 245 435 560 700 770 950

IAC,max 120 Hz 85 °C mA
10 13 21 30 41 45 74 137 175 190 225 275 345 610 785 980 1080 1330
Ordering code composition see below

B41851A9104M*** B41851A9224M*** B41851A9334M*** B41851A9474M*** B41851A9684M*** B41851A9105M*** B41851A9225M*** B41851A9335M*** B41851A9475M*** B41851A9106M*** B41851B9226M*** B41851F9336M*** B41851A9336M*** B41851B9476M*** B41851A9686M*** B41851A9107M*** B41851A9227M*** B41851A9337M*** B41851A9477M*** B41851F9687M*** B41851F9108M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 5 x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 36

B43851 Standard series 105 °C
Technical data and ordering codes B43851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 160 V DC
10 x 16
10 x 16
10 x 20
10 x 20
16 x 25
18 x 35
20 x 40
25 x 40

ESRmax 120 Hz 20 °C
186 85 56 40 18 13

IAC,R 120 Hz 105 °C mA
16 23 28 35 56 91 108 125 143 150 188 250 300 332 532 560 695 910 1000

IAC,max 120 Hz 85 °C mA
27 39 48 60 95 155 184 213 243 255 320 425 510 564 904 952 1182 1547 1700
Ordering code composition see below

B43851A1105M*** B43851A1225M*** B43851A1335M*** B43851F1475M*** B43851F1106M*** B43851F1226M*** B43851A1226M*** B43851F1336M*** B43851A1336M*** B43851K1476M*** B43851F1476M*** B43851K1686M*** B43851F1107M*** B43851A1107M*** B43851F1227M*** B43851A1227M*** B43851F1337M*** B43851F1477M*** B43851G1687M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 36

B43851 Standard series 105 °C
Technical data and ordering codes B43851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 200 V DC
10 x 16
10 x 20
16 x 25
20 x 35
22 x 40

VR = 250 V DC
10 x 20

ESRmax 120 Hz 20 °C
186 85 56 40 21
395 273 186
85 65 40 23

IAC,R 120 Hz 105 °C mA
16 23 28 35 56 108 144 190 245 332 560 650 760
11 13 16 23 35 38 66 120

IAC,max 120 Hz 85 °C mA
27 39 48 60 95 184 245 323 417 564 952 1105 1292
19 22 27 39 60 65 112 204
Ordering code composition see below

B43851A2105M*** B43851A2225M*** B43851A2335M*** B43851G2475M*** B43851G2106M*** B43851K2226M*** B43851B2336M*** B43851R2476M*** B43851K2686M*** B43851A2107M*** B43851B2227M*** B43851R2337M*** B43851R2477M***

B43851F2474M*** B43851F2684M*** B43851F2105M*** B43851F2225M*** B43851K2335M*** B43851P2475M*** B43851K2106M*** B43851F2226M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 36

B43851 Standard series 105 °C
Technical data and ordering codes B43851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 250 V DC
16 x 25
18 x 40
22 x 40

VR = 350 V DC
10 x 16
16 x 25
18 x 35

ESRmax 120 Hz 20 °C
395 273 186
97 85 65 45 21

IAC,R 120 Hz 105 °C mA
161 203 266 364 476 658
10 12 15 23 26 30 38 70 140 168 210 290 364

IAC,max 120 Hz 85 °C mA
274 345 452 619 809 1119
17 20 26 39 44 51 65 119 238 286 357 493 619
Ordering code composition see below

B43851K2336M*** B43851G2476M*** B43851F2686M*** B43851K2107M*** B43851F2227M*** B43851F2337M***

B43851A4474M*** B43851A4684M*** B43851A4105M*** B43851F4225M*** B43851B4225M*** B43851F4335M*** B43851F4475M*** B43851F4106M*** B43851F4226M*** B43851F4336M*** B43851F4476M*** B43851F4686M*** B43851F4107M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 36

B43851 Standard series 105 °C
Technical data and ordering codes B43851

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 400 V DC
10 x 20
16 x 20
16 x 25
18 x 40

VR = 450 V DC
10 x 20
16 x 25
18 x 35
20 x 40

ESRmax 120 Hz 20 °C
97 65 46 18
97 65 45 26 14

IAC,R 120 Hz 105 °C mA
26 36 56 80 140 168 196 294 310
20 28 32 56 100 125 155 193 207

IAC,max 120 Hz 85 °C mA
44 61 95 136 238 286 333 500 527
34 48 54 95 170 213 264 328 352
Ordering code composition see below

B43851H9225M*** B43851F9335M*** B43851F9475M*** B43851A9106M*** B43851F9226M*** B43851F9336M*** B43851F9476M*** B43851A9686M*** B43851K9107M***

B43851F5225M*** B43851F5335M*** B43851K5475M*** B43851F5106M*** B43851F5226M*** B43851F5336M*** B43851F5476M*** B43851A5686M*** B43851A5107M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk from d x l = 10 x mm to 22 x 40 mm 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 18 x 35 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for d = 8 mm 007 = for taped leads, Ammo pack, lead spacing F = mm from d = 5 mm to mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = x 11 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x 25 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 36

B41851, B43851 Standard series 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 VR = 100 V DC

VR = 160 450 V DC
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 36

Frequency factor of permissible ripple current IAC versus frequency f VR 100 V DC

B41851, B43851 Standard series 105 °C

Frequency factor of permissible ripple current IAC versus frequency f VR 160 V DC

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 36

B41851, B43851 Standard series 105 °C

Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 8 to 18 mm as follows Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.

Leads can also run straight through the taping area.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 20 of 36
Lead spacing mm d = 8 mm Last 3 digits of ordering code 008

B41851, B43851 Standard series 105 °C
Lead spacing mm d = 10 mm Last 3 digits of ordering code 008

Dimensions in mm

W W0 W1 W2 H0 P

Tolerance
min. max.

Taping is available up to dimensions d x l = x 25 mm.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 21 of 36

B41851, B43851 Standard series 105 °C
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.

Taping is available up to dimensions d x l = 16 x mm and 18 x mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 22 of 36

B41851, B43851 Standard series 105 °C

Cut or kinked leads

Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request.
Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal

With flat rubber seal

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 23 of 36
B41851, B43851 Standard series 105 °C Kinked leads Last 3 digits of ordering code 001 With stand-off rubber seal

With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 24 of 36

B41851, B43851 Standard series 105 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm excluding d x l = x 30/35/40 mm . There are three configurations available Crimped leads, J leads, bent 90° leads
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 25 of 36
B41851, B43851 Standard series 105 °C J leads Last 3 digits of ordering code 004

Suggestion for PCB hole diameter

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 26 of 36

B41851, B43851 Standard series 105 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 27 of 36

B41851, B43851 Standard series 105 °C

Packing units and box dimensions Ammo pack

Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345

Bmax 55

Cmax 240
345 55 280
345 60 200
345 60 200
345 65 280
345 65 280
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 1000
750 500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 28 of 36

B41851, B43851 Standard series 105 °C

Overview of packing units and code numbers for case sizes 8 x 16 x

Case size dxl
mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000

Taped, Ammo pack
pcs.
1000

Code F mm d mm
006 008 5 009

Kinked leads, bulk pcs. 500 350 500 200 250 100 001

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 216
250 344
344 180
100 150
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 29 of 36

B41851, B43851 Standard series 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 18 x 40

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 000

Taped, Ammo pack
pcs. 250 Code F mm d mm 009

Kinked leads, bulk pcs. 175 150 100 001

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 30 of 36

B41851, B43851 Standard series 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum.

Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.

MDS Material Data Sheets are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS Material Safety Data Sheets are available for all of our electrolytes upon request.

Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

Page 31 of 36

B41851, B43851 Standard series 105 °C

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information".

Topic

Polarity

Mounting of single-ended capacitors

Soldering, cleaning agents Upper category temperature Passive flammability

Safety information

More datasheets: B41851A4109M000 | B43851A1105M8 | B43851A1335M7 | B43851F2225M8 | B41851A9225M8 | B41851A6475M7 | B41851A6225M7 | B41851A8106M7 | B41851A6225M | B41851A6226M7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B41851A8228M000 Datasheet file may be downloaded here without warranties.

Datasheet ID: B41851A8228M000 511429