B41828A2227M

B41828A2227M Datasheet

B41828, B43828 December 2010

Part	Datasheet
B41828A2227M	B41828A2227M (pdf)

Related Parts	Information
B41828A5476M	B41828A5476M
B41828A5475M	B41828A5475M
B41828A5338M	B41828A5338M
B41828A5337M	B41828A5337M
B41828A5336M	B41828A5336M
B41828A5228M	B41828A5228M
B41828A5227M	B41828A5227M
B41828A5226M	B41828A5226M
B41828A5158M	B41828A5158M
B41828A4337M	B41828A4337M
B41828A5156M	B41828A5156M
B41828A5685M	B41828A5685M
B41828A5107Q	B41828A5107Q
B41828A5106M	B41828A5106M
B41828A4688M	B41828A4688M
B41828A4687M	B41828A4687M
B41828A4686M	B41828A4686M
B41828A4478M	B41828A4478M
B41828A4477M	B41828A4477M
B41828A4476M	B41828A4476M
B41828A6474M	B41828A6474M
B41828A5157M	B41828A5157M
B41828A6155M	B41828A6155M
B41828A6336M	B41828A6336M
B41828A6335M	B41828A6335M
B41828A6334M	B41828A6334M
B41828A6228M	B41828A6228M
B41828A6227M	B41828A6227M
B41828A6226M	B41828A6226M
B41828A6225M	B41828A6225M
B41828A6224M	B41828A6224M
B41828A6158M	B41828A6158M
B41828A5477M	B41828A5477M
B41828A6156M	B41828A6156M
B41828A5478M	B41828A5478M
B41828A6154M	B41828A6154M
B41828A6108M	B41828A6108M
B41828A6107M	B41828A6107M
B41828A6106M	B41828A6106M
B41828A6105M	B41828A6105M
B41828A6104M	B41828A6104M
B41828A5687M	B41828A5687M
B41828A5686M	B41828A5686M
B41828A4336M	B41828A4336M
B41828A6157M	B41828A6157M
B41828A2337M	B41828A2337M
B41828A3157M	B41828A3157M
B41828A3109M	B41828A3109M
B41828A3108M	B41828A3108M
B41828A3107M	B41828A3107M
B41828A2688M	B41828A2688M
B41828A2687M	B41828A2687M
B41828A2686M	B41828A2686M
B41828A2478M	B41828A2478M
B41828A2477M	B41828A2477M
B41828A4338M	B41828A4338M
B41828A2338M	B41828A2338M
B41828A3226M	B41828A3226M
B41828A2336M	B41828A2336M
B41828A2228M	B41828A2228M
B41828A2159M	B41828A2159M
B41828A2158M	B41828A2158M
B41828A2157M	B41828A2157M
B41828A2109M	B41828A2109M
B41828A2108M	B41828A2108M
B41828A2107M	B41828A2107M
B41828A2476M	B41828A2476M
B41828A3687M	B41828A3687M
B41828A4228M	B41828A4228M
B41828A4227M	B41828A4227M
B41828A4226M	B41828A4226M
B41828A4158M	B41828A4158M
B41828A4157M	B41828A4157M
B41828A4156M	B41828A4156M
B41828A4109M	B41828A4109M
B41828A4108M	B41828A4108M
B41828A4107M	B41828A4107M
B41828A3158M	B41828A3158M
B41828A3688M	B41828A3688M
B41828A3159M	B41828A3159M
B41828A3686M	B41828A3686M
B41828A3478M	B41828A3478M
B41828A3477M	B41828A3477M
B41828A3476M	B41828A3476M
B41828A3338M	B41828A3338M
B41828A3337M	B41828A3337M
B41828A3336M	B41828A3336M
B41828A3228M	B41828A3228M
B41828A3227M	B41828A3227M
B41828A6475M	B41828A6475M
B41828A4106M	B41828A4106M
B41828A9157M	B41828A9157M
B41828A9476M	B41828A9476M
B41828A9475M	B41828A9475M
B41828A9474M	B41828A9474M
B41828A9337M	B41828A9337M
B41828A9336M	B41828A9336M
B41828A9335M	B41828A9335M
B41828A9334M	B41828A9334M
B41828A9227M	B41828A9227M
B41828A9226M	B41828A9226M
B41828A8686M	B41828A8686M
B41828A9224M	B41828A9224M
B41828A9685M	B41828A9685M
B41828A9156M	B41828A9156M
B41828A9155M	B41828A9155M
B41828A9154M	B41828A9154M
B41828A9108M	B41828A9108M
B41828A9107M	B41828A9107M
B41828A9106M	B41828A9106M
B41828A9105M	B41828A9105M
B41828A9104M	B41828A9104M
B41828A6337M	B41828A6337M
B41828A9225M	B41828A9225M
B41828B5108M	B41828B5108M
B41828C4478M	B41828C4478M
B41828B9107M	B41828B9107M
B41828B7477M	B41828B7477M
B41828B7337M	B41828B7337M
B41828B7227M	B41828B7227M
B41828B7108M	B41828B7108M
B41828B7107M	B41828B7107M
B41828B5477M	B41828B5477M
B41828B5338M	B41828B5338M
B41828A9477M	B41828A9477M
B41828B5228M	B41828B5228M
B41828A9684M	B41828A9684M
B41828B4478M	B41828B4478M
B41828B4477M	B41828B4477M
B41828B4228M	B41828B4228M
B41828B4227M	B41828B4227M
B41828B4108M	B41828B4108M
B41828B4107M	B41828B4107M
B41828B3228M	B41828B3228M
B41828B2477M	B41828B2477M
B41828A9686M	B41828A9686M
B41828A8685M	B41828A8685M
B41828B5337M	B41828B5337M
B41828A7108M	B41828A7108M
B41828A7338M	B41828A7338M
B41828A7337M	B41828A7337M
B41828A7336M	B41828A7336M
B41828A7335M	B41828A7335M
B41828A7228M	B41828A7228M
B41828A7227M	B41828A7227M
B41828A7226M	B41828A7226M
B41828A7225M	B41828A7225M
B41828A7158M	B41828A7158M
B41828A8687M	B41828A8687M
B41828A7156M	B41828A7156M
B41828A7477M	B41828A7477M
B41828A7107M	B41828A7107M
B41828A7106M	B41828A7106M
B41828A6687M	B41828A6687M
B41828A6686M	B41828A6686M
B41828A6685M	B41828A6685M
B41828A6684M	B41828A6684M
B41828A6567M	B41828A6567M
B41828A6477M	B41828A6477M
B41828A6476M	B41828A6476M
B41828A7157M	B41828A7157M
B41828A8157M	B41828A8157M
B41828A8684M	B41828A8684M
B41828A8477M	B41828A8477M
B41828A8476M	B41828A8476M
B41828A8475M	B41828A8475M
B41828A8474M	B41828A8474M
B41828A8337M	B41828A8337M
B41828A8336M	B41828A8336M
B41828A8335M	B41828A8335M
B41828A8227M	B41828A8227M
B41828A7475M	B41828A7475M
B41828A8225M	B41828A8225M
B41828A7476M	B41828A7476M
B41828A8156M	B41828A8156M
B41828A8155M	B41828A8155M
B41828A8108M	B41828A8108M
B41828A8107M	B41828A8107M
B41828A8106M	B41828A8106M
B41828A8105M	B41828A8105M
B41828A7687M	B41828A7687M
B41828A7686M	B41828A7686M
B41828A7685M	B41828A7685M
B41828A5107M	B41828A5107M
B41828A8226M	B41828A8226M
B41828A5108M	B41828A5108M

PDF Datasheet Preview
Aluminum electrolytic capacitors Single-ended capacitors Series/Type Date: B41828, B43828 December 2010 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors Standard series 105 °C General-purpose grade capacitors Applications General-purpose applications Semi-professional to professional application range For filtering, coupling and pulse circuits Features Miniaturized dimensions RoHS-compatible Useful life of 2000 h at 105 °C Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent from diameter 8 mm Delivery mode Bulk Taped, Ammo pack Cut see chapter "Single-ended Taping, packing and lead configurations, Cut leads Chapter A " Kinked see chapter "Single-ended Taping, packing and lead configurations, Kinked leads Chapter A " Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details. B41828, B43828 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 39 B41828, B43828 Standard series 105 °C Specifications and characteristics in brief Series Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor max. 20 °C, 120 Hz Leakage current Ileak 20 °C, after 5 minutes Useful life 105 °C VR IAC,R Requirements Shelf life Vibration resistance test IEC climatic category B41828 B43828 100 V DC 160 450 V DC VR 250 V DC VR at room temperature VR > 250 V DC VR at room temperature 15000 µF 220 µF ±20% M ±20% M For capacitance higher than 1000 µF add for every increase of 1000 µF. 10 16 25 35 50 63 100 160 315 250 450 or 3 µA, whichever is greater > 2000 h ±20% of initial value Technical data and ordering codes B41828 CR 120 Hz, 20 °C µF VR = V DC 47 100 220 330 470 1000 2200 3300 4700 10000 15000 VR = 10 V DC 47 100 220 330 470 1000 2200 3300 4700 10000 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 5 x 11 5 x 11 x 11 x 11 8 x 10 x 20 x 20 16 x 25 16 x 18 x 66 97 162 198 259 454 793 939 1378 1852 2131 5 x 11 5 x 11 x 11 8 x 8 x 10 x 16 x 20 x 25 16 x 25 18 x 68 106 177 236 281 520 849 1118 1425 2004 Ordering code composition see below B41828A2476M* B41828A2107M* B41828A2227M* B41828A2337M* B41828A2477M* B41828A2108M* B41828A2228M* B41828A2338M* B41828A2478M* B41828A2109M* B41828A2159M* B41828A3476M* B41828A3107M* B41828A3227M* B41828A3337M* B41828A3477M* B41828A3108M* B41828A3228M* B41828A3338M* B41828A3478M* B41828A3109M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 39 B41828 Standard series 105 °C Technical data and ordering codes B41828 CR 120 Hz, 20 °C µF VR = 16 V DC 10 20 33 47 100 220 330 470 1000 2200 3300 4700 VR = 25 V DC 10 47 100 220 330 470 1000 2200 3300 4700 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 5 x 11 5 x 11 5 x 11 5 x 11 x 11 8 x 8 x 8 x 10 x 20 x 20 16 x 25 16 x 35 55 66 80 129 214 266 314 626 1028 1323 1661 5 x 11 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 16 x 25 16 x 18 x 37 85 143 245 319 429 680 1233 1571 1925 Ordering code composition see below B41828A4106M* B41828A4226M* B41828A4336M* B41828A4476M* B41828A4107M* B41828A4227M* B41828A4337M* B41828A4477M* B41828A4108M* B41828A4228M* B41828A4338M* B41828A4478M* B41828A5106M* B41828A5476M* B41828A5107M* B41828A5227M* B41828A5337M* B41828A5477M* B41828A5108M* B41828A5228M* B41828A5338M* B41828A5478M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 39 B41828 Standard series 105 °C Technical data and ordering codes B41828 CR 120 Hz, 20 °C µF VR = 35 V DC 10 22 33 47 100 220 330 470 1000 2200 3300 VR = 50 V DC 10 22 33 47 100 220 330 470 1000 2200 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 5 x 11 5 x 11 5 x 11 5 x 11 x 11 x 11 10 x 10 x 16 10 x 20 x 25 16 x 18 x 28 42 62 76 104 169 278 395 514 905 1403 1707 5 x 11 5 x 11 5 x 11 x 11 x 11 8 x 10 x 16 10 x 20 x 20 16 x 25 18 x 14 48 70 101 118 193 369 458 535 1085 1559 Ordering code composition see below B41828A7475M* B41828A7106M* B41828A7226M* B41828A7336M* B41828A7476M* B41828A7107M* B41828A7227M* B41828A7337M* B41828A7477M* B41828A7108M* B41828A7228M* B41828A7338M* B41828A6105M* B41828A6106M* B41828A6226M* B41828A6336M* B41828A6476M* B41828A6107M* B41828A6227M* B41828A6337M* B41828A6477M* B41828A6108M* B41828A6228M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 39 B41828 Standard series 105 °C Technical data and ordering codes B41828 CR 120 Hz, 20 °C µF VR = 63 V DC 10 22 33 47 100 220 330 470 1000 VR = 100 V DC 10 22 33 47 100 220 330 470 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 5 x 11 x 11 x 11 8 x 10 x 20 x 20 x 25 16 x 50 79 103 135 217 374 570 715 1043 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 10 x 16 16 x 25 16 x 25 Ordering code composition see below B41828A8106M* B41828A8226M* B41828A8336M* B41828A8476M* B41828A8107M* B41828A8227M* B41828A8337M* B41828A8477M* B41828A8108M* B41828A9474M* B41828A9105M* B41828A9225M* B41828A9335M* B41828A9475M* B41828A9106M* B41828A9226M* B41828A9336M* B41828A9476M* B41828A9107M* B41828A9227M* B41828A9337M* B41828A9477M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 39 B43828 Standard series 105 °C Technical data and ordering codes B43828 CR 120 Hz, 20 °C µF VR = 160 V DC 10 22 33 47 100 220 VR = 200 V DC 10 22 33 47 100 220 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 5 x 11 5 x 11 10 x 16 16 x 25 10 x 16 10 x 20 18 x 40 Ordering code composition see below B43828A1474M* B43828A1105M* B43828A1225M* B43828A1335M* B43828A1475M* B43828A1106M* B43828A1226M* B43828A1336M* B43828A1476M* B43828A1107M* B43828A1227M* B43828A2105M* B43828A2225M* B43828A2335M* B43828A2475M* B43828A2106M* B43828A2226M* B43828A2336M* B43828A2476M* B43828A2107M* B43828A2227M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 39 B43828 Standard series 105 °C Technical data and ordering codes B43828 CR 120 Hz, 20 °C µF VR = 250 V DC 10 22 33 47 100 VR = 350 V DC 10 22 33 47 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 10 x 20 16 x 25 10 x 16 16 x 25 16 x 25 Ordering code composition see below B43828F2474M* B43828F2105M* B43828F2225M* B43828F2335M* B43828F2475M* B43828F2106M* B43828F2226M* B43828F2336M* B43828F2476M* B43828F2107M* B43828A4105M* B43828A4225M* B43828A4335M* B43828A4475M* B43828A4106M* B43828A4226M* B43828A4336M* B43828A4476M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 39 B43828 Standard series 105 °C Technical data and ordering codes B43828 CR 120 Hz, 20 °C µF VR = 400 V DC 10 22 33 47 VR = 450 V DC 10 15 22 33 47 68 Case dimensions dxl mm IAC,R 120 Hz, 105 °C mA 10 x 16 10 x 20 16 x 25 10 x 16 10 x 20 16 x 25 Ordering code composition see below B43828A9105M* B43828A9225M* B43828A9335M* B43828A9475M* B43828A9106M* B43828A9226M* B43828A9336M* B43828A9476M* B43828A5105M* B43828A5155M* B43828A5225M* B43828A5335M* B43828A5475M* B43828A5685M* B43828A5106M* B43828A5156M* B43828A5226M* B43828A5336M* B43828B5476M* B43828A5476M* B43828A5686M* Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 39 B41828, B43828 Standard series 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 B41828 Useful life depending on ambient temperature TA under ripple current operating conditions1 B43828 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 39 B41828, B43828 Standard series 105 °C Frequency factor of permissible ripple current IAC versus frequency f Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 39 B41828, B43828 Standard series 105 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 4 to 18 mm as follows Lead spacing F = mm d = 4 5 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016 Dimensions in mm W0 W1 W2 P min. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 39 B41828, B43828 Standard series 105 °C Lead spacing mm d = 4 mm Last 3 digits of ordering code 007 Dimensions in mm W W0 W1 W2 H0 P P0 P1 I1 Tolerrance min. max. max. max. Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. max. Leads can also run straight through the taping area. Taping is available up to dimensions d x l = 8 x 15 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 39 Lead spacing mm d = 4 8 mm Last 3 digits of ordering code 008 B41828, B43828 Standard series 105 °C Lead spacing mm d = 10 mm Last 3 digits of ordering code 008 Dimensions in mm W W0 W1 W2 H0 P Tolerance min. max. max. max. Taping is available up to dimensions d x l = x 25 mm. Taping is not available for d x l = 8 x 20 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 39 B41828, B43828 Standard series 105 °C Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. Taping is available up to dimensions d x l = 16 x mm and 18 x mm. Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 39 B41828, B43828 Standard series 105 °C Cut or kinked leads Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request. Cut leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 002 Case size d x l mm 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 Dimensions mm a Case size d x l mm x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 39 B41828, B43828 Standard series 105 °C Cut leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 39 B41828, B43828 Standard series 105 °C Kinked leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 001 Case size d x l mm 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 Dimensions mm a Case size d x l mm x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 39 B41828, B43828 Standard series 105 °C Kinked leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 39 B41828, B43828 Standard series 105 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm. There are three configurations available Crimped leads, J leads, bent 90° leads Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 39 B41828, B43828 Standard series 105 °C J leads Last 3 digits of ordering code 004 Suggestion for PCB hole diameter Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 39 B41828, B43828 Standard series 105 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 27 of 39 B41828, B43828 Standard series 105 °C Packing units and box dimensions Ammo pack Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Case size dxl mm 4x7 5x7 5 x 11 x 7 x 11 8x7 8 x 8 x 15 10 x 10 x 16 10 x 20 x 20 x 25 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 330 Bmax 50 Cmax 196 330 50 226 330 50 226 330 50 286 330 50 286 330 50 246 330 50 246 330 50 246 330 50 196 330 54 196 330 58 196 341 60 272 341 65 272 320 65 270 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 2000 1000 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 28 of 39 B41828, B43828 Standard series 105 °C Ammo pack Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 10000 7500 5000 2500 2000 1500 2000 1500 1000 750 500 375 250 000 Taped, Kinked leads, Ammo pack bulk pcs. pcs. 2000 15000 2000 10000 2000 10000 2000 10000 2000 5000 1000 5000 1000 4000 1000 2500 2000 2500 2000 1500 1250 1000 Code F mm d mm 001 16 18 Cut leads, bulk pcs. 15000 10000 5000 4000 2500 2000 2500 2000 1500 1250 1000 500 750 500 375 002 Please read Cautions and warnings and Important notes at the end of this document. Page 30 of 39 B41828, B43828 Standard series 105 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 250 000 Taped, Ammo pack pcs. Code F mm d mm 16 18 Kinked leads, bulk pcs. 100 001 Cut leads, bulk pcs. 100 002 Please read Cautions and warnings and Important notes at the end of this document. Page 31 of 39 B41828, B43828 Standard series 105 °C Overview of packing units and code numbers for case sizes 8 x 16 x Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000 Taped, Ammo pack pcs. 1000 Code F mm d mm 006 008 5 009 Kinked leads, bulk pcs. 500 350 500 200 250 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 120 250 344 344 120 100 150 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 32 of 39 B41828, B43828 Standard series 105 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 000 Taped, Ammo pack pcs. 250 Code F mm d mm 009 Kinked leads, bulk pcs. 175 150 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 33 of 39 B41828, B43828 Standard series 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 34 of 39 B41828, B43828 Standard series 105 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting position of screwterminal capacitors Mounting of single-ended capacitors Robustness of terminals Soldering Safety information Reference

PDF Datasheet Preview

Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type Date:

B41828, B43828 December 2010

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Single-ended capacitors Standard series 105 °C

General-purpose grade capacitors

Applications General-purpose applications Semi-professional to professional application range For filtering, coupling and pulse circuits

Features Miniaturized dimensions RoHS-compatible Useful life of 2000 h at 105 °C

Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent from diameter 8 mm

Delivery mode

Bulk Taped, Ammo pack Cut see chapter "Single-ended Taping, packing and lead configurations, Cut leads Chapter A " Kinked see chapter "Single-ended Taping, packing and lead configurations, Kinked leads Chapter A "

Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details.

B41828, B43828

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 39

B41828, B43828 Standard series 105 °C

Specifications and characteristics in brief

Series Rated voltage VR Surge voltage VS

Rated capacitance CR Capacitance tolerance Dissipation factor max. 20 °C, 120 Hz

Leakage current Ileak 20 °C, after 5 minutes Useful life 105 °C VR IAC,R Requirements

Shelf life

Vibration resistance test

IEC climatic category

B41828

B43828
100 V DC
160 450 V DC

VR 250 V DC VR at room temperature

VR > 250 V DC VR at room temperature
15000 µF
220 µF
±20% M
±20% M

For capacitance higher than 1000 µF add for every increase of
1000 µF.
10 16 25 35 50 63 100 160 315
250 450
or 3 µA, whichever is greater
> 2000 h
±20% of initial value
Technical data and ordering codes B41828

CR 120 Hz, 20 °C µF

VR = V DC
47 100 220 330 470 1000 2200 3300 4700 10000 15000

VR = 10 V DC
47 100 220 330 470 1000 2200 3300 4700 10000

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
5 x 11 5 x 11 x 11 x 11 8 x 10 x 20 x 20 16 x 25 16 x 18 x
66 97 162 198 259 454 793 939 1378 1852 2131
5 x 11 5 x 11 x 11 8 x 8 x 10 x 16 x 20 x 25 16 x 25 18 x
68 106 177 236 281 520 849 1118 1425 2004
Ordering code composition see below

B41828A2476M*** B41828A2107M*** B41828A2227M*** B41828A2337M*** B41828A2477M*** B41828A2108M*** B41828A2228M*** B41828A2338M*** B41828A2478M*** B41828A2109M*** B41828A2159M***

B41828A3476M*** B41828A3107M*** B41828A3227M*** B41828A3337M*** B41828A3477M*** B41828A3108M*** B41828A3228M*** B41828A3338M*** B41828A3478M*** B41828A3109M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 39

B41828 Standard series 105 °C
Technical data and ordering codes B41828

CR 120 Hz, 20 °C µF

VR = 16 V DC
10 20 33 47 100 220 330 470 1000 2200 3300 4700

VR = 25 V DC
10 47 100 220 330 470 1000 2200 3300 4700

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
5 x 11 5 x 11 5 x 11 5 x 11 x 11 8 x 8 x 8 x 10 x 20 x 20 16 x 25 16 x
35 55 66 80 129 214 266 314 626 1028 1323 1661
5 x 11 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 16 x 25 16 x 18 x
37 85 143 245 319 429 680 1233 1571 1925
Ordering code composition see below

B41828A4106M*** B41828A4226M*** B41828A4336M*** B41828A4476M*** B41828A4107M*** B41828A4227M*** B41828A4337M*** B41828A4477M*** B41828A4108M*** B41828A4228M*** B41828A4338M*** B41828A4478M***

B41828A5106M*** B41828A5476M*** B41828A5107M*** B41828A5227M*** B41828A5337M*** B41828A5477M*** B41828A5108M*** B41828A5228M*** B41828A5338M*** B41828A5478M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 39

B41828 Standard series 105 °C
Technical data and ordering codes B41828

CR 120 Hz, 20 °C µF

VR = 35 V DC
10 22 33 47 100 220 330 470 1000 2200 3300

VR = 50 V DC
10 22 33 47 100 220 330 470 1000 2200

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
5 x 11 5 x 11 5 x 11 5 x 11 x 11 x 11 10 x 10 x 16 10 x 20 x 25 16 x 18 x
28 42 62 76 104 169 278 395 514 905 1403 1707
5 x 11 5 x 11 5 x 11 x 11 x 11 8 x 10 x 16 10 x 20 x 20 16 x 25 18 x
14 48 70 101 118 193 369 458 535 1085 1559
Ordering code composition see below

B41828A7475M*** B41828A7106M*** B41828A7226M*** B41828A7336M*** B41828A7476M*** B41828A7107M*** B41828A7227M*** B41828A7337M*** B41828A7477M*** B41828A7108M*** B41828A7228M*** B41828A7338M***

B41828A6105M*** B41828A6106M*** B41828A6226M*** B41828A6336M*** B41828A6476M*** B41828A6107M*** B41828A6227M*** B41828A6337M*** B41828A6477M*** B41828A6108M*** B41828A6228M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 39

B41828 Standard series 105 °C
Technical data and ordering codes B41828

CR 120 Hz, 20 °C µF

VR = 63 V DC
10 22 33 47 100 220 330 470 1000

VR = 100 V DC
10 22 33 47 100 220 330 470

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
5 x 11 x 11 x 11 8 x 10 x 20 x 20 x 25 16 x
50 79 103 135 217 374 570 715 1043
5 x 11
5 x 11
5 x 11
5 x 11
5 x 11
10 x 16
16 x 25
16 x 25
Ordering code composition see below

B41828A8106M*** B41828A8226M*** B41828A8336M*** B41828A8476M*** B41828A8107M*** B41828A8227M*** B41828A8337M*** B41828A8477M*** B41828A8108M***

B41828A9474M*** B41828A9105M*** B41828A9225M*** B41828A9335M*** B41828A9475M*** B41828A9106M*** B41828A9226M*** B41828A9336M*** B41828A9476M*** B41828A9107M*** B41828A9227M*** B41828A9337M*** B41828A9477M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 39

B43828 Standard series 105 °C
Technical data and ordering codes B43828

CR 120 Hz, 20 °C µF

VR = 160 V DC
10 22 33 47 100 220

VR = 200 V DC
10 22 33 47 100 220

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
5 x 11
5 x 11
10 x 16
16 x 25
10 x 16
10 x 20
18 x 40
Ordering code composition see below

B43828A1474M*** B43828A1105M*** B43828A1225M*** B43828A1335M*** B43828A1475M*** B43828A1106M*** B43828A1226M*** B43828A1336M*** B43828A1476M*** B43828A1107M*** B43828A1227M***

B43828A2105M*** B43828A2225M*** B43828A2335M*** B43828A2475M*** B43828A2106M*** B43828A2226M*** B43828A2336M*** B43828A2476M*** B43828A2107M*** B43828A2227M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 39

B43828 Standard series 105 °C
Technical data and ordering codes B43828

CR 120 Hz, 20 °C µF

VR = 250 V DC
10 22 33 47 100

VR = 350 V DC
10 22 33 47

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
10 x 20
16 x 25
10 x 16
16 x 25
16 x 25
Ordering code composition see below

B43828F2474M*** B43828F2105M*** B43828F2225M*** B43828F2335M*** B43828F2475M*** B43828F2106M*** B43828F2226M*** B43828F2336M*** B43828F2476M*** B43828F2107M***

B43828A4105M*** B43828A4225M*** B43828A4335M*** B43828A4475M*** B43828A4106M*** B43828A4226M*** B43828A4336M*** B43828A4476M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 39

B43828 Standard series 105 °C
Technical data and ordering codes B43828

CR 120 Hz, 20 °C µF

VR = 400 V DC
10 22 33 47

VR = 450 V DC
10 15 22 33 47 68

Case dimensions dxl mm

IAC,R 120 Hz, 105 °C mA
10 x 16
10 x 20
16 x 25
10 x 16
10 x 20
16 x 25
Ordering code composition see below

B43828A9105M*** B43828A9225M*** B43828A9335M*** B43828A9475M*** B43828A9106M*** B43828A9226M*** B43828A9336M*** B43828A9476M***

B43828A5105M*** B43828A5155M*** B43828A5225M*** B43828A5335M*** B43828A5475M*** B43828A5685M*** B43828A5106M*** B43828A5156M*** B43828A5226M*** B43828A5336M*** B43828B5476M*** B43828A5476M*** B43828A5686M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm, excluding d x l = 16 x

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 39

B41828, B43828 Standard series 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 B41828

Useful life depending on ambient temperature TA under ripple current operating conditions1 B43828
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 39

B41828, B43828 Standard series 105 °C

Frequency factor of permissible ripple current IAC versus frequency f

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 39

B41828, B43828 Standard series 105 °C

Taping, packing and lead configurations

Taping

Single-ended capacitors are available taped in Ammo pack from diameter 4 to 18 mm as follows Lead spacing F = mm d = 4 5 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016

Dimensions in mm

W0 W1 W2 P
min.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 39

B41828, B43828 Standard series 105 °C
Lead spacing mm d = 4 mm Last 3 digits of ordering code 007

Dimensions in mm

W W0 W1 W2 H0 P

P0 P1 I1

Tolerrance
min.
max.
max.
max.
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
max.

Leads can also run straight through the taping area. Taping is available up to dimensions d x l = 8 x 15 mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 39
Lead spacing mm d = 4 8 mm Last 3 digits of ordering code 008

B41828, B43828 Standard series 105 °C
Lead spacing mm d = 10 mm Last 3 digits of ordering code 008

Dimensions in mm

W W0 W1 W2 H0 P

Tolerance
min. max.
max.
max.

Taping is available up to dimensions d x l = x 25 mm. Taping is not available for d x l = 8 x 20 mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 39

B41828, B43828 Standard series 105 °C
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.

Taping is available up to dimensions d x l = 16 x mm and 18 x mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 20 of 39

B41828, B43828 Standard series 105 °C

Cut or kinked leads Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request.
Cut leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 002

Case size d x l mm
4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25

Dimensions mm a

Case size d x l mm
x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 21 of 39

B41828, B43828 Standard series 105 °C
Cut leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 002

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 22 of 39

B41828, B43828 Standard series 105 °C
Kinked leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 001

Case size d x l mm
4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25

Dimensions mm a

Case size d x l mm
x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 23 of 39

B41828, B43828 Standard series 105 °C
Kinked leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 001

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 24 of 39

B41828, B43828 Standard series 105 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm. There are three configurations available Crimped leads, J leads, bent 90° leads

Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 25 of 39
B41828, B43828 Standard series 105 °C J leads Last 3 digits of ordering code 004

Suggestion for PCB hole diameter

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 26 of 39

B41828, B43828 Standard series 105 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 27 of 39

B41828, B43828 Standard series 105 °C

Packing units and box dimensions

Ammo pack Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828.

Case size dxl mm 4x7 5x7 5 x 11 x 7 x 11 8x7 8 x 8 x 15 10 x 10 x 16 10 x 20 x 20 x 25 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 330

Bmax 50

Cmax 196
330 50 226
330 50 226
330 50 286
330 50 286
330 50 246
330 50 246
330 50 246
330 50 196
330 54 196
330 58 196
341 60 272
341 65 272
320 65 270
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 2000 1000
500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 28 of 39

B41828, B43828 Standard series 105 °C

Ammo pack

Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.

Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345
4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 10000
7500 5000 2500 2000 1500 2000 1500 1000
750 500 375 250 000

Taped,

Kinked leads,

Ammo pack
bulk
pcs.
pcs.
2000
15000
2000
10000
2000
10000
2000
10000
2000
5000
1000
5000
1000
4000
1000
2500
2000
2500
2000
1500
1250
1000

Code F mm d mm 001
16 18

Cut leads, bulk pcs. 15000 10000
5000 4000 2500 2000 2500 2000 1500 1250 1000
500 750 500 375 002

Please read Cautions and warnings and Important notes at the end of this document.

Page 30 of 39

B41828, B43828 Standard series 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 18 x 40
Case size dxl mm 18 x 20 18 x 25 18 x 18 x 18 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs.
250 000

Taped, Ammo pack
pcs.

Code F mm d mm
16 18

Kinked leads, bulk pcs.
100 001

Cut leads, bulk pcs.
100 002

Please read Cautions and warnings and Important notes at the end of this document.

Page 31 of 39

B41828, B43828 Standard series 105 °C

Overview of packing units and code numbers for case sizes 8 x 16 x

Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.

Case size dxl
mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000

Taped, Ammo pack
pcs.
1000

Code F mm d mm
006 008 5 009

Kinked leads, bulk pcs. 500 350 500 200 250 100 001

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 120
250 344
344 120
100 150
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 32 of 39

B41828, B43828 Standard series 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 18 x 40

Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 000

Taped, Ammo pack
pcs. 250 Code F mm d mm 009

Kinked leads, bulk pcs. 175 150 100 001

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 33 of 39

B41828, B43828 Standard series 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

Page 34 of 39

B41828, B43828 Standard series 105 °C

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information".

Topic Polarity

Mounting position of screwterminal capacitors Mounting of single-ended capacitors

Robustness of terminals

Soldering

Safety information

Reference

More datasheets: B41828A2688M | B41828A2687M | B41828A2686M | B41828A2478M | B41828A2477M | B41828A4338M | B41828A2338M | B41828A3226M | B41828A2336M | B41828A2228M

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B41828A2227M Datasheet file may be downloaded here without warranties.

Datasheet ID: B41828A2227M 511427