B41505A8109M

B41505A8109M Datasheet

B41505 December 2016

Part	Datasheet
B41505A8109M	B41505A8109M (pdf)

PDF Datasheet Preview
Aluminum electrolytic capacitors Snap-in capacitors Series/Type Date: B41505 December 2016 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Snap-in capacitors Excellent performance 105 °C Long-life grade capacitors Applications Professional power supplies Features Long useful life High reliability Outstanding ripple current capability Low ESR Capacitors pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the base Terminals Standard version with 2 terminals, 2 lengths available and mm 3 terminals to ensure correct insertion length mm B41505 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 17 B41505 Excellent performance 105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 100 Hz Leakage current Ileak 5 min, 20 °C Self-inductance ESL Useful life1 105 °C VR IAC,R 85 °C VR IAC,max 40 °C VR IAC,R Load life test 105 °C VR IAC,R Voltage endurance test 105 °C VR Vibration resistance test Characteristics at low temperature 10 100 V DC VR 560 33000 uF ±20% M VR = 10 V DC tan VR = 16 V DC tan VR = 25 V DC tan VR = 35 V DC tan VR = 50 V DC tan VR = 63 100 V DC tan Approx. 20 nH Requirements: > 5000 h > 12000 h 45% of initial value tan 3 times initial specified limit > 25000 h Ileak initial specified limit Post test requirements: 4000 h 20% of initial value tan 2 times initial specified limit Ileak initial specified limit Post test requirements: 2000 h 15% of initial value tan times initial specified limit Ileak To IEC 60068-2-6, test Fc: initial specified limit Frequency range 10 Hz 55 Hz, displacement amplitude mm, acceleration max. 5 g, duration 3 x 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code Snap-in capacitors Terminal version Insulation version Standard terminals mm M000 Short terminals mm M007 3 terminals mm M002 Ordering examples: B41505A5109M007 B41505A5109M002 snap-in capacitor with short terminals snap-in capacitor with 3 terminals Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 17 B41505 Excellent performance 105 °C Overview of available types The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request. VR V DC CR uF 560 680 1000 1200 1500 2200 3300 4700 6800 10000 15000 18000 22000 33000 Case dimensions d x l mm 22 x 25 22 x 30 22 x 40 30 x 35 30 x 45 22 x 30 25 x 30 25 x 40 30 x 40 22 x 30 25 x 25 x 30 25 x 40 30 x 40 22 x 25 22 x 30 25 x 25 22 x 40 25 x 40 30 x 40 35 x 40 35 x 45 22 x 35 25 x 35 30 x 35 30 x 50 35 x 45 22 x 25 22 x 35 25 x 35 30 x 30 x 40 35 x 35 35 x 50 25 x 25 30 x 25 x 35 30 x 35 35 x 35 35 x 45 25 x 25 22 x 35 25 x 35 30 x 30 30 x 40 30 x 50 35 x 50 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 17 B41505 Excellent performance 105 °C Technical data and ordering codes CR 100 Hz 20 °C uF Case dimensions dxl mm VR = 10 V DC 6800 22 x 25 10000 22 x 30 15000 22 x 40 22000 30 x 35 33000 30 x 45 VR = 16 V DC 6800 22 x 30 10000 25 x 30 15000 25 x 40 22000 30 x 40 VR = 25 V DC 4700 22 x 30 4700 25 x 25 6800 25 x 30 10000 25 x 40 15000 30 x 40 VR = 35 V DC 2200 22 x 25 3300 22 x 30 3300 25 x 25 4700 22 x 40 6800 25 x 40 10000 30 x 40 15000 35 x 40 18000 35 x 45 VR = 50 V DC 2200 22 x 35 3300 25 x 35 4700 30 x 35 6800 30 x 50 10000 35 x 45 ESRtyp 100 Hz 20 °C mΩ 74 53 37 26 19 46 34 24 17 53 41 30 22 85 56 45 35 26 19 17 85 56 42 33 25 Zmax 10 kHz 20 °C mΩ 78 56 39 28 20 49 36 26 18 57 43 32 23 90 60 48 37 28 20 18 90 60 45 35 26 Composition of ordering code # = Terminal style 0 = snap-in standard terminals mm 2 = snap-in 3 terminals mm 7 = snap-in short terminals mm IAC,max 100 Hz 60 °C A IAC,max 100 Hz 85 °C A AC,R Ordering code 100 Hz composition see 105 °C below B41505A3688M00# B41505A3109M00# B41505A3159M00# B41505A3229M00# B41505A3339M00# B41505A4688M00# B41505A4109M00# B41505A4159M00# B41505A4229M00# B41505A5478M00# B41505F5478M00# B41505A5688M00# B41505A5109M00# B41505A5159M00# B41505A7228M00# B41505A7338M00# B41505F7338M00# B41505A7478M00# B41505A7688M00# B41505A7109M00# B41505A7159M00# B41505A7189M00# B41505A6228M00# B41505A6338M00# B41505A6478M00# B41505A6688M00# B41505A6109M00# 1 120-Hz conversion factor of ripple current IAC 120 Hz = IAC 100 Hz Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 17 B41505 Excellent performance 105 °C Technical data and ordering codes CR 100 Hz 20 °C uF Case dimensions dxl mm VR = 63 V DC 1000 22 x 25 1500 22 x 35 2200 25 x 35 2200 30 x 30 3300 30 x 40 4700 35 x 35 6800 35 x 50 VR = 80 V DC 1000 25 x 25 1200 30 x 25 1500 25 x 35 2200 30 x 35 3300 35 x 35 4700 35 x 45 VR = 100 V DC 560 25 x 25 680 22 x 35 1000 25 x 35 1000 30 x 30 1500 30 x 40 2200 30 x 50 3300 35 x 50 ESRtyp 100 Hz 20 °C mΩ 149 100 68 80 53 42 29 125 104 83 56 45 32 178 146 100 66 56 38 Zmax 10 kHz 20 °C mΩ 159 106 72 85 56 45 31 133 110 89 60 48 34 190 156 106 70 60 40 Composition of ordering code # = Terminal style 0 = snap-in standard terminals mm 2 = snap-in 3 terminals mm 7 = snap-in short terminals mm IAC,max 100 Hz 60 °C A IAC,max 100 Hz 85 °C A AC,R Ordering code 100 Hz composition see 105 °C below B41505A8108M00# B41505A8158M00# B41505A8228M00# B41505F8228M00# B41505A8338M00# B41505A8478M00# B41505A8688M00# B41505A0108M00# B41505A0128M00# B41505A0158M00# B41505A0228M00# B41505A0338M00# B41505A0478M00# B41505A9567M00# B41505A9687M00# B41505A9108M00# B41505F9108M00# B41505A9158M00# B41505A9228M00# B41505A9338M00# 2 120-Hz conversion factor of ripple current IAC 120 Hz = IAC 100 Hz Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 17 B41505 Excellent performance 105 °C Useful life1 depending on ambient temperature TA under ripple current operating conditions Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristic of ESR Typical behavior 1 Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 17 B41505 Excellent performance 105 °C Impedance Z versus frequency f Typical behavior at 20 °C Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 17 B41505 Excellent performance 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS Material Data Sheets are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS Material Safety Data Sheets are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 17 B41505 Excellent performance 105 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting of single-ended capacitors Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 17 B41505 Excellent performance 105 °C Symbols and terms Symbol C CR CS,T Cf d dmax ESL ESR ESRf ESRT f I IAC,RMS IAC,f IAC,max IAC,R Ileak,op l lmax R Rins Rsymm T TA TC TB t tb English Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current ripple current Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length without terminals and mounting stud Resistance Insulation resistance Balancing resistance Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life operating hours German Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand bei Frequenz f Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge ohne Anschlüsse und Gewindebolzen Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer Betriebszeit Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 17 Symbol V VF Vop VR VS XC XL Z ZT tan λ ε0 εr English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity 2 f Note All dimensions are given in mm. B41505 Excellent performance 105 °C German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz 2 f Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 17 Important notes The following applies to all products named in this publication Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI . Page 16 of 17 Important notes The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at Page 17 of 17

PDF Datasheet Preview

Aluminum electrolytic capacitors

Snap-in capacitors

Series/Type Date:

B41505 December 2016

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Snap-in capacitors Excellent performance 105 °C

Long-life grade capacitors

Applications Professional power supplies

Features Long useful life High reliability Outstanding ripple current capability Low ESR Capacitors pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible

Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the base

Terminals Standard version with 2 terminals, 2 lengths available and mm 3 terminals to ensure correct insertion length mm

B41505

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 17

B41505 Excellent performance 105 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 100 Hz

Leakage current Ileak 5 min, 20 °C Self-inductance ESL Useful life1 105 °C VR IAC,R 85 °C VR IAC,max 40 °C VR IAC,R Load life test 105 °C VR IAC,R

Voltage endurance test 105 °C VR

Vibration resistance test

Characteristics at low temperature
10 100 V DC VR 560 33000 uF ±20% M VR = 10 V DC tan VR = 16 V DC tan VR = 25 V DC tan VR = 35 V DC tan VR = 50 V DC tan VR = 63 100 V DC tan

Approx. 20 nH

Requirements:
> 5000 h > 12000 h
45% of initial value tan 3 times initial specified limit
> 25000 h

Ileak
initial specified limit

Post test requirements:
4000 h
20% of initial value tan 2 times initial specified limit

Ileak
initial specified limit

Post test requirements:
2000 h
15% of initial value tan times initial specified limit

Ileak To IEC 60068-2-6, test Fc:
initial specified limit

Frequency range 10 Hz 55 Hz, displacement amplitude mm, acceleration max. 5 g, duration 3 x 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code

Snap-in capacitors

Terminal version

Insulation version

Standard terminals mm

M000

Short terminals mm

M007
3 terminals mm

M002
Ordering examples:

B41505A5109M007 B41505A5109M002
snap-in capacitor with short terminals snap-in capacitor with 3 terminals

Please read Cautions and warnings and Important notes at the end of this document.

Page 5 of 17

B41505 Excellent performance 105 °C

Overview of available types

The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request.

VR V DC

CR uF 560 680
1000
1200 1500 2200
3300
4700
6800 10000 15000 18000 22000 33000

Case dimensions d x l mm
22 x 25 22 x 30 22 x 40
30 x 35 30 x 45
22 x 30 25 x 30 25 x 40
30 x 40
22 x 30 25 x 25 x 30 25 x 40 30 x 40
22 x 25
22 x 30 25 x 25 22 x 40
25 x 40 30 x 40 35 x 40 35 x 45
22 x 35 25 x 35 30 x 35 30 x 50 35 x 45
22 x 25
22 x 35 25 x 35 30 x 30 x 40
35 x 35
35 x 50
25 x 25
30 x 25 x 35 30 x 35
35 x 35
35 x 45
25 x 25 22 x 35 25 x 35 30 x 30
30 x 40 30 x 50
35 x 50

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 17

B41505 Excellent performance 105 °C
Technical data and ordering codes

CR 100 Hz 20 °C uF

Case dimensions dxl mm

VR = 10 V DC
6800 22 x 25 10000 22 x 30 15000 22 x 40 22000 30 x 35 33000 30 x 45

VR = 16 V DC
6800 22 x 30 10000 25 x 30 15000 25 x 40 22000 30 x 40

VR = 25 V DC
4700 22 x 30 4700 25 x 25 6800 25 x 30 10000 25 x 40 15000 30 x 40

VR = 35 V DC
2200 22 x 25 3300 22 x 30 3300 25 x 25 4700 22 x 40 6800 25 x 40 10000 30 x 40 15000 35 x 40 18000 35 x 45

VR = 50 V DC
2200 22 x 35 3300 25 x 35 4700 30 x 35 6800 30 x 50 10000 35 x 45

ESRtyp 100 Hz 20 °C mΩ
74 53 37 26 19
46 34 24 17
53 41 30 22
85 56 45 35 26 19 17
85 56 42 33 25

Zmax 10 kHz 20 °C mΩ
78 56 39 28 20
49 36 26 18
57 43 32 23
90 60 48 37 28 20 18
90 60 45 35 26
Composition of ordering code # = Terminal style
0 = snap-in standard terminals mm 2 = snap-in 3 terminals mm 7 = snap-in short terminals mm

IAC,max 100 Hz 60 °C A

IAC,max 100 Hz 85 °C A

AC,R
Ordering code
100 Hz composition see
105 °C below

B41505A3688M00# B41505A3109M00# B41505A3159M00# B41505A3229M00# B41505A3339M00#

B41505A4688M00# B41505A4109M00# B41505A4159M00# B41505A4229M00#

B41505A5478M00# B41505F5478M00# B41505A5688M00# B41505A5109M00# B41505A5159M00#

B41505A7228M00# B41505A7338M00# B41505F7338M00# B41505A7478M00# B41505A7688M00# B41505A7109M00# B41505A7159M00# B41505A7189M00#

B41505A6228M00# B41505A6338M00# B41505A6478M00# B41505A6688M00# B41505A6109M00#
1 120-Hz conversion factor of ripple current IAC 120 Hz = IAC 100 Hz

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 17

B41505 Excellent performance 105 °C
Technical data and ordering codes

CR 100 Hz 20 °C uF

Case dimensions dxl mm

VR = 63 V DC
1000 22 x 25 1500 22 x 35 2200 25 x 35 2200 30 x 30 3300 30 x 40 4700 35 x 35 6800 35 x 50

VR = 80 V DC
1000 25 x 25 1200 30 x 25 1500 25 x 35 2200 30 x 35 3300 35 x 35 4700 35 x 45

VR = 100 V DC
560 25 x 25 680 22 x 35 1000 25 x 35 1000 30 x 30 1500 30 x 40 2200 30 x 50 3300 35 x 50

ESRtyp 100 Hz 20 °C mΩ
149 100
68 80 53 42 29
125 104
83 56 45 32
178 146 100
66 56 38

Zmax 10 kHz 20 °C mΩ
159 106
72 85 56 45 31
133 110
89 60 48 34
190 156 106
70 60 40
Composition of ordering code # = Terminal style
0 = snap-in standard terminals mm 2 = snap-in 3 terminals mm 7 = snap-in short terminals mm

IAC,max 100 Hz 60 °C A

IAC,max 100 Hz 85 °C A

AC,R
Ordering code
100 Hz composition see
105 °C below

B41505A8108M00# B41505A8158M00# B41505A8228M00# B41505F8228M00# B41505A8338M00# B41505A8478M00# B41505A8688M00#

B41505A0108M00# B41505A0128M00# B41505A0158M00# B41505A0228M00# B41505A0338M00# B41505A0478M00#

B41505A9567M00# B41505A9687M00# B41505A9108M00# B41505F9108M00# B41505A9158M00# B41505A9228M00# B41505A9338M00#
2 120-Hz conversion factor of ripple current IAC 120 Hz = IAC 100 Hz

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 17

B41505 Excellent performance 105 °C

Useful life1 depending on ambient temperature TA under ripple current operating conditions

Frequency factor of permissible ripple current IAC versus frequency f

Frequency characteristic of ESR Typical behavior
1 Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 17

B41505 Excellent performance 105 °C

Impedance Z versus frequency f Typical behavior at 20 °C

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 17

B41505 Excellent performance 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum.

Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.

MDS Material Data Sheets are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS Material Safety Data Sheets are available for all of our electrolytes upon request.

Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 17

B41505 Excellent performance 105 °C

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information".

Topic

Polarity

Mounting of single-ended capacitors

Soldering, cleaning agents Upper category temperature Passive flammability

Safety information

Reference
chapter "General
technical information"

Make sure that polar capacitors are connected 1
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 17

B41505 Excellent performance 105 °C

Symbols and terms

Symbol C CR CS,T Cf d dmax ESL ESR ESRf

ESRT
f I IAC,RMS

IAC,f IAC,max IAC,R Ileak,op l lmax

R Rins Rsymm T TA TC TB t tb

English Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current ripple current Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length without terminals and mounting stud Resistance Insulation resistance Balancing resistance Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life operating hours

German Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand bei Frequenz f

Ersatzserienwiderstand bei Temperatur T

Frequenz Strom Wechselstrom, Effektivwert

Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge ohne Anschlüsse und Gewindebolzen Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer Betriebszeit

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 17

Symbol V VF Vop VR VS XC XL Z ZT tan λ ε0 εr

English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity 2 f

Note All dimensions are given in mm.

B41505 Excellent performance 105 °C

German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz 2 f

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 17

Important notes

The following applies to all products named in this publication Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI .

Page 16 of 17

Important notes The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS,

DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at

Page 17 of 17

More datasheets: 260860000 | 521560000 | 261060000 | 260900000 | 260700000 | 260960000 | 497760000 | 261460000 | 260760000 | 497600000

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B41505A8109M Datasheet file may be downloaded here without warranties.

Datasheet ID: B41505A8109M 511416