B41042A2227M

B41042A2227M Datasheet

B41042

Part	Datasheet
B41042A2227M	B41042A2227M (pdf)

Related Parts	Information
B41042A6107M	B41042A6107M
B41042A5566M	B41042A5566M
B41042A5567M	B41042A5567M
B41042A566M	B41042A566M
B41042A567M	B41042A567M
B41042A5686M	B41042A5686M
B41042A5826M	B41042A5826M
B41042A5827M	B41042A5827M
B41042A6105M	B41042A6105M
B41042A6106M	B41042A6106M
B41042A6108M	B41042A6108M
B41042A6126M	B41042A6126M
B41042A6127M	B41042A6127M
B41042A6128M	B41042A6128M
B41042A6155M	B41042A6155M
B41042A6156M	B41042A6156M
B41042A6157M	B41042A6157M
B41042A5478M	B41042A5478M
B41042A6186M	B41042A6186M
B41042A5277M	B41042A5277M
B41042A6158M	B41042A6158M
B41042A6397M	B41042A6397M
B41042A4827M	B41042A4827M
B41042A4828M	B41042A4828M
B41042A5108M	B41042A5108M
B41042A5128M	B41042A5128M
B41042A5157M	B41042A5157M
B41042A5158M	B41042A5158M
B41042A5187M	B41042A5187M
B41042A5188M	B41042A5188M
B41042A5336M	B41042A5336M
B41042A5228M	B41042A5228M
B41042A5477M	B41042A5477M
B41042A5278M	B41042A5278M
B41042A6187M	B41042A6187M
B41042A5337M	B41042A5337M
B41042A5338M	B41042A5338M
B41042A5396M	B41042A5396M
B41042A5397M	B41042A5397M
B41042A5398M	B41042A5398M
B41042A5476M	B41042A5476M
B41042A5227M	B41042A5227M
B41042A7227M	B41042A7227M
B41042A6336M	B41042A6336M
B41042A7107M	B41042A7107M
B41042A7108M	B41042A7108M
B41042A7127M	B41042A7127M
B41042A7128M	B41042A7128M
B41042A7157M	B41042A7157M
B41042A7158M	B41042A7158M
B41042A7187M	B41042A7187M
B41042A686M	B41042A686M
B41042A7226M	B41042A7226M
B41042A685M	B41042A685M
B41042A7228M	B41042A7228M
B41042A7276M	B41042A7276M
B41042A7277M	B41042A7277M
B41042A7278M	B41042A7278M
B41042A7336M	B41042A7336M
B41042A7337M	B41042A7337M
B41042A7338M	B41042A7338M
B41042A7396M	B41042A7396M
B41042A7188M	B41042A7188M
B41042A6475M	B41042A6475M
B41042A6225M	B41042A6225M
B41042A6226M	B41042A6226M
B41042A6227M	B41042A6227M
B41042A6228M	B41042A6228M
B41042A6276M	B41042A6276M
B41042A6335M	B41042A6335M
B41042A4826M	B41042A4826M
B41042A6396M	B41042A6396M
B41042A687M	B41042A687M
B41042A6474M	B41042A6474M
B41042A6188M	B41042A6188M
B41042A6477M	B41042A6477M
B41042A6567M	B41042A6567M
B41042A6684M	B41042A6684M
B41042A6685M	B41042A6685M
B41042A6686M	B41042A6686M
B41042A6687M	B41042A6687M
B41042A6826M	B41042A6826M
B41042A6827M	B41042A6827M
B41042A4478M	B41042A4478M
B41042A2828M	B41042A2828M
B41042A3228M	B41042A3228M
B41042A2398M	B41042A2398M
B41042A2477M	B41042A2477M
B41042A2478M	B41042A2478M
B41042A2567M	B41042A2567M
B41042A2568M	B41042A2568M
B41042A2687M	B41042A2687M
B41042A2688M	B41042A2688M
B41042A2338M	B41042A2338M
B41042A2827M	B41042A2827M
B41042A227M	B41042A227M
B41042A3107M	B41042A3107M
B41042A3108M	B41042A3108M
B41042A3109M	B41042A3109M
B41042A3127M	B41042A3127M
B41042A3128M	B41042A3128M
B41042A3157M	B41042A3157M
B41042A3187M	B41042A3187M
B41042A4567M	B41042A4567M
B41042A277M	B41042A277M
B41042A2127M	B41042A2127M
B41042A106M	B41042A106M
B41042A107M	B41042A107M
B41042A108M	B41042A108M
B41042A126M	B41042A126M
B41042A156M	B41042A156M
B41042A186M	B41042A186M
B41042A187M	B41042A187M
B41042A2107M	B41042A2107M
B41042A2397M	B41042A2397M
B41042A2109M	B41042A2109M
B41042A3337M	B41042A3337M
B41042A2128M	B41042A2128M
B41042A2129M	B41042A2129M
B41042A2157M	B41042A2157M
B41042A2158M	B41042A2158M
B41042A2159M	B41042A2159M
B41042A2187M	B41042A2187M
B41042A2278M	B41042A2278M
B41042A2108M	B41042A2108M
B41042A3338M	B41042A3338M
B41042A3188M	B41042A3188M
B41042A4228M	B41042A4228M
B41042A4277M	B41042A4277M
B41042A4278M	B41042A4278M
B41042A4337M	B41042A4337M
B41042A4338M	B41042A4338M
B41042A4397M	B41042A4397M
B41042A4398M	B41042A4398M
B41042A4188M	B41042A4188M
B41042A4477M	B41042A4477M
B41042A4158M	B41042A4158M
B41042A4566M	B41042A4566M
B41042A7397M	B41042A7397M
B41042A4568M	B41042A4568M
B41042A4686M	B41042A4686M
B41042A4687M	B41042A4687M
B41042A4688M	B41042A4688M
B41042A475M	B41042A475M
B41042A476M	B41042A476M
B41042A4476M	B41042A4476M
B41042A3688M	B41042A3688M
B41042A336M	B41042A336M
B41042A337M	B41042A337M
B41042A3397M	B41042A3397M
B41042A3398M	B41042A3398M
B41042A3477M	B41042A3477M
B41042A3478M	B41042A3478M
B41042A3567M	B41042A3567M
B41042A3568M	B41042A3568M
B41042A4227M	B41042A4227M
B41042A3687M	B41042A3687M
B41042A477M	B41042A477M
B41042A3826M	B41042A3826M
B41042A3827M	B41042A3827M
B41042A3828M	B41042A3828M
B41042A396M	B41042A396M
B41042A397M	B41042A397M
B41042A4107M	B41042A4107M
B41042A4127M	B41042A4127M
B41042A4128M	B41042A4128M
B41042A3686M	B41042A3686M
B41042A8566M	B41042A8566M
B41042A7476M	B41042A7476M
B41042A3278M	B41042A3278M
B41042A8827M	B41042A8827M
B41042A8826M	B41042A8826M
B41042A8687M	B41042A8687M
B41042A8567M	B41042A8567M
B41042A8477M	B41042A8477M
B41042A8476M	B41042A8476M
B41042A8397M	B41042A8397M
B41042A8337M	B41042A8337M
B41042A827M	B41042A827M
B41042A8277M	B41042A8277M
B41042A8276M	B41042A8276M
B41042A826M	B41042A826M
B41042A8106M	B41042A8106M
B41042A7567M	B41042A7567M
B41042A7566M	B41042A7566M
B41042A8686M	B41042A8686M
B41042A8227M	B41042A8227M
B41042A7687M	B41042A7687M
B41042A7827M	B41042A7827M
B41042A8107M	B41042A8107M
B41042A8156M	B41042A8156M
B41042A8226M	B41042A8226M
B41042A8126M	B41042A8126M
B41042A8186M	B41042A8186M
B41042A8127M	B41042A8127M
B41042A8128M	B41042A8128M
B41042A8108M	B41042A8108M
B41042A8157M	B41042A8157M

PDF Datasheet Preview
Single-ended Aluminum electrolytic capacitors Series/Type: B41042 The following products presented in this data sheet are being withdrawn. Ordering Code B41042* Substitute Product Date of Withdrawal 2013-02-22 Deadline Last Orders 2013-09-30 Last Shipments 2014-03-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Single-ended capacitors Low impedance 105 °C Single-ended capacitors LoLnogw-liifme • Professional switch mode power supplies • RoHS-compatible • High C/V value • Low impedance at high frequencies • Load life of 5000 h at 105 °C Construction • Radial leads • Aluminum case, fully insulated • Charge-discharge proof • Minus pole marking on the insulating sleeve • Case with safety vent from diameter 8 mm Delivery mode • Bulk • Taped, Ammo pack • Cut • Kinked B41042 Please read Cautions and warnings and Important notes at the end of this document. 2 08/08 Single-ended capacitors Low impedance 105 °C B41042 Specifications and characteristics in brief Rated voltage VR 80 V DC Operating temp. range °C +105 °C Rated capacitance CR 15000 µF 20 °C, 120 Hz Capacitance tolerance ±20% M Load life 105 °C, VR, IAC,R 2000 h for d = 5 mm 3000 h for d = 8 mm 5000 h for d 10 mm Requirements ±25% of initial value tan 2 times initial specified limit Ileak initial specified limit Leakage current Ileak 20 °C, after 1 minute Ileak C-----R-µF -V-V---R- Dissipation factor max. For capacitance higher than 1000 µF add for every increase of 20 °C, 120 Hz 1000 µF. VR V DC tan 25 35 50 63 80 Low temperature stability VR V DC impedance ratio 120 Hz 16 35 3 Technical data and ordering codes CR 120 Hz 20 °C µF 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 Case dimensions dxl mm 5 x 11 5 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 10 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 152 176 227 253 287 374 400 448 551 597 731 796 953 1022 1221 1375 1472 1592 1711 1914 2102 2373 2376 2551 2753 2825 2963 B41042 Ordering codes composition see below B41042A2107M* B41042A2127M* B41042A2157M* B41042A2187M* B41042A2227M* B41042A2277M* B41042A2337M* B41042A2397M* B41042A2477M* B41042A2567M* B41042A2687M* B41042A2827M* B41042A2108M* B41042A2128M* B41042A2158M* B41042A2188M* B41042A2228M* B41042A2278M* B41042A2338M* B41042A2398M* B41042A2478M* B41042A2568M* B41042A2688M* B41042A2828M* B41042A2109M* B41042A2129M* B41042A2159M* Please read Cautions and warnings and Important notes at the end of this document. 8 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes V DC 10 CR 120 Hz 20 °C µF 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 Case dimensions dxl mm 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 40 16 x 16 x 16 x 16 x 40 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 152 176 211 236 268 291 372 405 463 552 596 733 798 987 1061 1282 1443 1472 1715 1941 2184 2362 2422 2613 2682 2812 3045 B41042 Ordering code composition see below B41042A3686M* B41042A3826M* B41042A3107M* B41042A3127M* B41042A3157M* B41042A3187M* B41042A3227M* B41042A3277M* B41042A3337M* B41042A3397M* B41042A3477M* B41042A3567M* B41042A3687M* B41042A3827M* B41042A3108M* B41042A3128M* B41042A3158M* B41042A3188M* B41042A3228M* B41042A3278M* B41042A3338M* B41042A3398M* B41042A3478M* B41042A3568M* B41042A3688M* B41042A3828M* B41042A3109M* Please read Cautions and warnings and Important notes at the end of this document. 9 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes V DC 16 CR 120 Hz 20 °C µF 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 Case dimensions dxl mm 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 40 16 x 16 x 16 x 40 18 x 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 155 176 221 243 267 292 376 408 462 553 597 731 772 954 1021 1225 1411 1432 1665 1881 2015 2223 1412 2471 2585 2822 2903 3041 B41042 Ordering code composition see below B41042A4476M* B41042A4566M* B41042A4686M* B41042A4826M* B41042A4107M* B41042A4127M* B41042A4157M* B41042A4187M* B41042A4227M* B41042A4277M* B41042A4337M* B41042A4397M* B41042A4477M* B41042A4567M* B41042A4687M* B41042A4827M* B41042A4108M* B41042A4128M* B41042A4158M* B41042A4188M* B41042A4228M* B41042A4278M* B41042A4338M* B41042A4398M* B41042A4478M* B41042A4568M* B41042A4688M* B41042A4828M* Please read Cautions and warnings and Important notes at the end of this document. 10 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes V DC 25 CR 120 Hz 20 °C µF 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 Case dimensions dxl mm 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 156 173 212 237 261 228 372 409 461 553 628 753 798 986 1021 1223 1424 1433 1661 1765 1982 2080 2361 2471 2662 2821 2965 B41042 Ordering code composition see below B41042A5336M* B41042A5396M* B41042A5476M* B41042A5566M* B41042A5686M* B41042A5826M* B41042A5107M* B41042A5127M* B41042A5157M* B41042A5187M* B41042A5227M* B41042A5277M* B41042A5337M* B41042A5397M* B41042A5477M* B41042A5567M* B41042A5687M* B41042A5827M* B41042A5108M* B41042A5128M* B41042A5158M* B41042A5188M* B41042A5228M* B41042A5278M* B41042A5338M* B41042A5398M* B41042A5478M* Please read Cautions and warnings and Important notes at the end of this document. 11 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes V DC 35 CR 120 Hz 20 °C µF 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 Case dimensions dxl mm 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 161 182 227 246 271 298 372 418 463 551 599 731 796 986 1061 1222 1423 1431 1663 1765 1982 2184 2362 2475 2684 2903 3041 B41042 Ordering code composition see below B41042A7226M* B41042A7276M* B41042A7336M* B41042A7396M* B41042A7476M* B41042A7566M* B41042A7686M* B41042A7826M* B41042A7107M* B41042A7127M* B41042A7157M* B41042A7187M* B41042A7227M* B41042A7277M* B41042A7337M* B41042A7397M* B41042A7477M* B41042A7567M* B41042A7687M* B41042A7827M* B41042A7108M* B41042A7128M* B41042A7158M* B41042A7188M* B41042A7228M* B41042A7278M* B41042A7338M* Please read Cautions and warnings and Important notes at the end of this document. 12 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes V DC 50 CR 120 Hz 20 °C µF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 Case dimensions dxl mm 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 10 x 25 x 25 x Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 23 29 37 47 57 68 82 93 116 127 148 157 196 216 241 263 332 361 415 501 623 675 821 893 1045 1203 1305 1441 1506 1682 1853 B41042 Ordering code composition see below B41042A6474M* B41042A6684M* B41042A6105M* B41042A6155M* B41042A6225M* B41042A6335M* B41042A6475M* B41042A6685M* B41042A6106M* B41042A6126M* B41042A6156M* B41042A6186M* B41042A6226M* B41042A6276M* B41042A6336M* B41042A6396M* B41042A6476M* B41042A6566M* B41042A6686M* B41042A6826M* B41042A6107M* B41042A6127M* B41042A6157M* B41042A6187M* B41042A6227M* B41042A6277M* B41042A6337M* B41042A6397M* B41042A6477M* B41042A6567M* B41042A6687M* Please read Cautions and warnings and Important notes at the end of this document. 13 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes VR V DC CR 120 Hz 20 °C µF 820 1000 1200 1500 1800 2200 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 Case dimensions dxl mm x 40 16 x 16 x 16 x 40 18 x 18 x 40 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 2017 2123 2264 2411 2463 2562 136 147 185 199 217 242 306 332 367 451 503 605 751 823 954 1113 1142 1345 1421 1623 1785 1952 2053 2223 2374 2511 B41042 Ordering code composition see below B41042A6827M* B41042A6108M* B41042A6128M* B41042A6158M* B41042A6188M* B41042A6228M* B41042A8106M* B41042A8126M* B41042A8156M* B41042A8186M* B41042A8226M* B41042A8276M* B41042A8336M* B41042A8396M* B41042A8476M* B41042A8566M* B41042A8686M* B41042A8826M* B41042A8107M* B41042A8127M* B41042A8157M* B41042A8187M* B41042A8227M* B41042A8277M* B41042A8337M* B41042A8397M* B41042A8477M* B41042A8567M* B41042A8687M* B41042A8827M* B41042A8108M* B41042A8128M* Please read Cautions and warnings and Important notes at the end of this document. 14 08/08 Single-ended capacitors Low impedance 105 °C Technical data and ordering codes V DC 80 CR 120 Hz 20 °C µF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Case dimensions dxl mm 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 20 10 x 20 10 x 25 10 x 10 x 25 x 40 16 x 16 x 16 x 40 18 x 18 x 40 Zmax 100 kHz 20 °C * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm IAC,R 100 kHz 105 °C mA 92 111 152 164 189 205 226 256 307 381 410 510 636 676 839 1032 1070 1115 1433 1509 1693 1828 1902 2080 2313 2357 2518 B41042 Ordering code composition see below B41042A0475M* B41042A0685M* B41042A0106M* B41042A0126M* B41042A0156M* B41042A0186M* B41042A0226M* B41042A0276M* B41042A0336M* B41042A0396M* B41042A0476M* B41042A0566M* B41042A0686M* B41042A0826M* B41042A0107M* B41042A0127M* B41042A0157M* B41042A0187M* B41042A0227M* B41042A0277M* B41042A0337M* B41042A0397M* B41042A0477M* B41042A0567M* B41042A0687M* B41042A0827M* B41042A0108M* Please read Cautions and warnings and Important notes at the end of this document. 15 08/08 Single-ended capacitors Taping, packing and lead configurations B41042 Taping, packing and lead configurations of single-ended capacitors Single-ended capacitors are available taped in Ammo pack from diameter 4 to 10 mm as follows: Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016 W0 W2 1 max. View B Base tape Adhesive tape F P1 B KAL1138-D-E Dimensions in mm W W0 W1 W2 P P0 P1 l1 min. max. max. Please read Cautions and warnings and Important notes at the end of this document. 16 08/08 Single-ended capacitors Taping, packing and lead configurations Lead spacing mm d = 4 mm Last 3 digits of ordering code 007 B41042 W0 W2 1 max. View B Base tape Adhesive tape KAL1074-3-E Dimensions in mm H0 W W0 W1 W2 P P0 P1 l1 t Tolerance min. max. max. Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 W0 W2 1 max. View B Base tape Adhesive tape F P1 B KAL1138-D-E Dimensions in mm W W0 W1 W2 P P0 P1 l1 Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. 17 08/08 Single-ended capacitors Taping, packing and lead configurations Lead spacing mm d = 4 8 mm Last 3 digits of ordering code 008 B41042 Base tape Adhesive tape Lead spacing mm d = 10 mm Last 3 digits of ordering code 008 P P0 W0 W2 1 max. View B KAL1075-B-E W0 W2 1 max. View B Base tape Adhesive tape KAL1076-J-E Dimensions in mm 4 8 10 Tolerance H0 W W0 W1 W2 P P0 P1 L1 t 16 10 max. max. max. Taping is available up to dimensions d x l = 10 x 20 mm. For 16 and 18 mm taping is not available. Please read Cautions and warnings and Important notes at the end of this document. 18 08/08 Single-ended capacitors Taping, packing and lead configurations B41042 Kinked or cut leads Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available on request. Kinked leads Last 3 digits of ordering code 001 KAL1137-5 KAL1084-A Case size d x l mm a mm 5 x 11 8 x 15 8 x 20 10 x 16 10 x 20 10 x 25 Please read Cautions and warnings and Important notes at the end of this document. Case size d x l mm a mm 16 x 20 16 x 25 16 x 40 18 x 20 18 x 25 18 x 40 19 08/08 Single-ended capacitors Taping, packing and lead configurations Cut leads Last 3 digits of ordering code 002 B41042 KAL1086-R Case size d x l mm a mm 5 x 11 8 x 15 8 x 20 10 x 16 10 x 20 10 x 25 Case size d x l mm a mm 16 x 20 16 x 25 16 x 40 18 x 20 18 x 25 18 x 40 Please read Cautions and warnings and Important notes at the end of this document. 20 08/08 Cautions and warnings General Also see “Important notes” on page 2 The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage, as this will result in a rapid increase of the leakage current and may damage the capacitor. It is recommended to operate the capacitor at of its rated voltage to optimize its service life. 3 The ripple current applied to the capacitor must be within the permitted range. An excessive ripple current leads to impaired electrical properties and may damage the capacitor. Note that the sum of the peak values of the ripple voltage and the DC operating voltage must not exceed the rated DC voltage. 4 Capacitors must be used within their permitted range of operating temperature. Operation at room temperature optimizes their service life. 5 Capacitors with case diameter mm are equipped with a safety vent. In capacitors fitted with a lead or soldering lug, the safety vent is usually located at the base of the case. It needs sufficient space around it to operate optimally. The following dimensions are recommended for case diameter d = 8 to 16 mm, more than 2 mm for d =18 to 35 mm, more than 3 mm and for d = 42 mm or more, more than 5 mm. 7 Gas is released through the safety vent when the pressure inside the capacitor is too high. A gaseous liquid around the safety vent does not indicate a leakage of electrolyte. 8 The capacitor should be stored under conditions of normal temperature and in a non-acid, non-alkali environment of normal humidity. Exposure to high temperatures, for example under direct sunlight, will reduce its operating life. If the capacitor is stored in an environment containing acids or alkalis, the solderability of the leads may be affected. 9 The leakage current of an aluminum electrolytic capacitor may increase after a long period of storage. After such storage, the capacitor must be aged by applying the rated operating voltage for hours before use. 10 Manual soldering: a Soldering must be performed within the specified conditions. Bit temperature 350 °C application time of soldering iron 3 seconds. b Ensure that the soldering iron does not touch any part of the capacitor body. Please read Cautions and warnings and Important notes at the end of this document. 21 08/08 Cautions and warnings 11 Do not apply excessive force to the leads and terminals. Do not move the capacitor after soldering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe the following rules to prevent undue stress to the capacitor a Do not tilt or bend the capacitor after soldering. b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board. 12 The aluminum case is not insulated from the cathode. Do not place a conductor under the aluminum capacitors on the PC board as this may cause a short circuit. The case and top of capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink sleeve to ensure safe usage. 13 The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing. Please read Cautions and warnings and Important notes at the end of this document. 22 08/08 Important notes

PDF Datasheet Preview

Single-ended Aluminum electrolytic capacitors

Series/Type:

B41042

The following products presented in this data sheet are being withdrawn.
Ordering Code B41042*

Substitute Product

Date of Withdrawal 2013-02-22

Deadline Last Orders 2013-09-30

Last Shipments 2014-03-31

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

Single-ended capacitors Low impedance 105 °C Single-ended capacitors LoLnogw-liifme
• Professional switch mode power supplies
• RoHS-compatible
• High C/V value
• Low impedance at high frequencies
• Load life of 5000 h at 105 °C

Construction
• Radial leads
• Aluminum case, fully insulated
• Charge-discharge proof
• Minus pole marking on the insulating sleeve
• Case with safety vent from diameter 8 mm

Delivery mode
• Bulk
• Taped, Ammo pack
• Cut
• Kinked

B41042

Please read Cautions and warnings and Important notes at the end of this document.
2 08/08

Single-ended capacitors Low impedance 105 °C

B41042

Specifications and characteristics in brief

Rated voltage VR
80 V DC

Operating temp. range °C +105 °C

Rated capacitance CR 15000 µF 20 °C, 120 Hz

Capacitance tolerance ±20% M

Load life 105 °C, VR, IAC,R
2000 h for d = 5 mm 3000 h for d = 8 mm 5000 h for d 10 mm

Requirements ±25% of initial value tan 2 times initial specified limit Ileak initial specified limit

Leakage current Ileak 20 °C, after 1 minute

Ileak

C-----R-µF
-V-V---R-

Dissipation factor max. For capacitance higher than 1000 µF add for every increase of
20 °C, 120 Hz
1000 µF.

VR V DC tan
25 35
50 63 80

Low temperature stability VR V DC
impedance ratio 120 Hz
16 35 3
Technical data and ordering codes

CR 120 Hz 20 °C µF
100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000

Case
dimensions
dxl mm
5 x 11 5 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 10 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
152 176 227 253 287 374 400 448 551 597 731 796 953 1022 1221 1375 1472 1592 1711 1914 2102 2373 2376 2551 2753 2825 2963

B41042
Ordering codes composition see below

B41042A2107M*** B41042A2127M*** B41042A2157M*** B41042A2187M*** B41042A2227M*** B41042A2277M*** B41042A2337M*** B41042A2397M*** B41042A2477M*** B41042A2567M*** B41042A2687M*** B41042A2827M*** B41042A2108M*** B41042A2128M*** B41042A2158M*** B41042A2188M*** B41042A2228M*** B41042A2278M*** B41042A2338M*** B41042A2398M*** B41042A2478M*** B41042A2568M*** B41042A2688M*** B41042A2828M*** B41042A2109M*** B41042A2129M*** B41042A2159M***

Please read Cautions and warnings and Important notes at the end of this document.
8 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

V DC 10

CR 120 Hz 20 °C µF
68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000

Case
dimensions
dxl mm
5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 40 16 x 16 x 16 x 16 x 40 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
152 176 211 236 268 291 372 405 463 552 596 733 798 987 1061 1282 1443 1472 1715 1941 2184 2362 2422 2613 2682 2812 3045

B41042
Ordering code composition see below

B41042A3686M*** B41042A3826M*** B41042A3107M*** B41042A3127M*** B41042A3157M*** B41042A3187M*** B41042A3227M*** B41042A3277M*** B41042A3337M*** B41042A3397M*** B41042A3477M*** B41042A3567M*** B41042A3687M*** B41042A3827M*** B41042A3108M*** B41042A3128M*** B41042A3158M*** B41042A3188M*** B41042A3228M*** B41042A3278M*** B41042A3338M*** B41042A3398M*** B41042A3478M*** B41042A3568M*** B41042A3688M*** B41042A3828M*** B41042A3109M***

Please read Cautions and warnings and Important notes at the end of this document.
9 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

V DC 16

CR 120 Hz 20 °C µF
47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200

Case
dimensions
dxl mm
5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 40 16 x 16 x 16 x 40 18 x 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
155 176 221 243 267 292 376 408 462 553 597 731 772 954 1021 1225 1411 1432 1665 1881 2015 2223 1412 2471 2585 2822 2903 3041

B41042
Ordering code composition see below

B41042A4476M*** B41042A4566M*** B41042A4686M*** B41042A4826M*** B41042A4107M*** B41042A4127M*** B41042A4157M*** B41042A4187M*** B41042A4227M*** B41042A4277M*** B41042A4337M*** B41042A4397M*** B41042A4477M*** B41042A4567M*** B41042A4687M*** B41042A4827M*** B41042A4108M*** B41042A4128M*** B41042A4158M*** B41042A4188M*** B41042A4228M*** B41042A4278M*** B41042A4338M*** B41042A4398M*** B41042A4478M*** B41042A4568M*** B41042A4688M*** B41042A4828M***

Please read Cautions and warnings and Important notes at the end of this document.
10 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

V DC 25

CR 120 Hz 20 °C µF
33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700

Case
dimensions
dxl mm
5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
156 173 212 237 261 228 372 409 461 553 628 753 798 986 1021 1223 1424 1433 1661 1765 1982 2080 2361 2471 2662 2821 2965

B41042
Ordering code composition see below

B41042A5336M*** B41042A5396M*** B41042A5476M*** B41042A5566M*** B41042A5686M*** B41042A5826M*** B41042A5107M*** B41042A5127M*** B41042A5157M*** B41042A5187M*** B41042A5227M*** B41042A5277M*** B41042A5337M*** B41042A5397M*** B41042A5477M*** B41042A5567M*** B41042A5687M*** B41042A5827M*** B41042A5108M*** B41042A5128M*** B41042A5158M*** B41042A5188M*** B41042A5228M*** B41042A5278M*** B41042A5338M*** B41042A5398M*** B41042A5478M***

Please read Cautions and warnings and Important notes at the end of this document.
11 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

V DC 35

CR 120 Hz 20 °C µF
22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300

Case
dimensions
dxl mm
5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
161 182 227 246 271 298 372 418 463 551 599 731 796 986 1061 1222 1423 1431 1663 1765 1982 2184 2362 2475 2684 2903 3041

B41042
Ordering code composition see below

B41042A7226M*** B41042A7276M*** B41042A7336M*** B41042A7396M*** B41042A7476M*** B41042A7566M*** B41042A7686M*** B41042A7826M*** B41042A7107M*** B41042A7127M*** B41042A7157M*** B41042A7187M*** B41042A7227M*** B41042A7277M*** B41042A7337M*** B41042A7397M*** B41042A7477M*** B41042A7567M*** B41042A7687M*** B41042A7827M*** B41042A7108M*** B41042A7128M*** B41042A7158M*** B41042A7188M*** B41042A7228M*** B41042A7278M*** B41042A7338M***

Please read Cautions and warnings and Important notes at the end of this document.
12 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

V DC 50

CR 120 Hz 20 °C µF
10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680

Case
dimensions
dxl mm
5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 16 10 x 16 10 x 20 10 x 20 10 x 25 10 x 10 x 25 x 25 x

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
23 29 37 47 57 68 82 93 116 127 148 157 196 216 241 263 332 361 415 501 623 675 821 893 1045 1203 1305 1441 1506 1682 1853

B41042
Ordering code composition see below

B41042A6474M*** B41042A6684M*** B41042A6105M*** B41042A6155M*** B41042A6225M*** B41042A6335M*** B41042A6475M*** B41042A6685M*** B41042A6106M*** B41042A6126M*** B41042A6156M*** B41042A6186M*** B41042A6226M*** B41042A6276M*** B41042A6336M*** B41042A6396M*** B41042A6476M*** B41042A6566M*** B41042A6686M*** B41042A6826M*** B41042A6107M*** B41042A6127M*** B41042A6157M*** B41042A6187M*** B41042A6227M*** B41042A6277M*** B41042A6337M*** B41042A6397M*** B41042A6477M*** B41042A6567M*** B41042A6687M***

Please read Cautions and warnings and Important notes at the end of this document.
13 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

VR V DC

CR 120 Hz 20 °C µF
820 1000 1200 1500 1800 2200
10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200

Case
dimensions
dxl mm
x 40 16 x 16 x 16 x 40 18 x 18 x 40
5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 20 10 x 20 10 x 25 10 x 20 x 25 x 25 x 40 16 x 16 x 16 x 40 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
2017 2123 2264 2411 2463 2562
136 147 185 199 217 242 306 332 367 451 503 605 751 823 954 1113 1142 1345 1421 1623 1785 1952 2053 2223 2374 2511

B41042
Ordering code composition see below

B41042A6827M*** B41042A6108M*** B41042A6128M*** B41042A6158M*** B41042A6188M*** B41042A6228M*** B41042A8106M*** B41042A8126M*** B41042A8156M*** B41042A8186M*** B41042A8226M*** B41042A8276M*** B41042A8336M*** B41042A8396M*** B41042A8476M*** B41042A8566M*** B41042A8686M*** B41042A8826M*** B41042A8107M*** B41042A8127M*** B41042A8157M*** B41042A8187M*** B41042A8227M*** B41042A8277M*** B41042A8337M*** B41042A8397M*** B41042A8477M*** B41042A8567M*** B41042A8687M*** B41042A8827M*** B41042A8108M*** B41042A8128M***

Please read Cautions and warnings and Important notes at the end of this document.
14 08/08

Single-ended capacitors Low impedance 105 °C
Technical data and ordering codes

V DC 80

CR 120 Hz 20 °C µF
10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000

Case
dimensions
dxl mm
5 x 11 5 x 11 x 11 x 11 x 11 x 11 x 15 x 15 8 x 10 x 10 x 10 x 16 10 x 20 10 x 20 10 x 25 10 x 10 x 25 x 40 16 x 16 x 16 x 40 18 x 18 x 40

Zmax 100 kHz 20 °C
*** =

Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing a = mm 007 = for taped leads, Ammo pack, lead spacing a = mm 006 = for taped leads, Ammo pack, lead spacing a = mm 008 = for taped leads, Ammo pack, lead spacing a = mm

IAC,R 100 kHz 105 °C mA
92 111 152 164 189 205 226 256 307 381 410 510 636 676 839 1032 1070 1115 1433 1509 1693 1828 1902 2080 2313 2357 2518

B41042
Ordering code composition see below

B41042A0475M*** B41042A0685M*** B41042A0106M*** B41042A0126M*** B41042A0156M*** B41042A0186M*** B41042A0226M*** B41042A0276M*** B41042A0336M*** B41042A0396M*** B41042A0476M*** B41042A0566M*** B41042A0686M*** B41042A0826M*** B41042A0107M*** B41042A0127M*** B41042A0157M*** B41042A0187M*** B41042A0227M*** B41042A0277M*** B41042A0337M*** B41042A0397M*** B41042A0477M*** B41042A0567M*** B41042A0687M*** B41042A0827M*** B41042A0108M***

Please read Cautions and warnings and Important notes at the end of this document.
15 08/08

Single-ended capacitors Taping, packing and lead configurations

B41042

Taping, packing and lead configurations of single-ended capacitors Single-ended capacitors are available taped in Ammo pack from diameter 4 to 10 mm as follows:
Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016

W0 W2
1 max.

View B

Base tape Adhesive tape

F P1 B

KAL1138-D-E

Dimensions in mm

W W0 W1 W2 P

P0 P1 l1
min. max. max.

Please read Cautions and warnings and Important notes at the end of this document.
16 08/08

Single-ended capacitors Taping, packing and lead configurations

Lead spacing mm d = 4 mm
Last 3 digits of ordering code 007

B41042

W0 W2
1 max.

View B

Base tape

Adhesive tape

KAL1074-3-E

Dimensions in mm

H0 W W0 W1 W2 P P0 P1 l1 t

Tolerance min. max. max.
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

W0 W2
1 max.

View B

Base tape Adhesive tape

F P1 B

KAL1138-D-E

Dimensions in mm

W W0 W1 W2 P

P0 P1 l1

Tolerance min. max. max. max.

Please read Cautions and warnings and Important notes at the end of this document.
17 08/08

Single-ended capacitors Taping, packing and lead configurations

Lead spacing mm d = 4 8 mm
Last 3 digits of ordering code 008

B41042

Base tape

Adhesive tape

Lead spacing mm d = 10 mm
Last 3 digits of ordering code 008 P P0

W0 W2
1 max.

View B

KAL1075-B-E

W0 W2
1 max.

View B

Base tape

Adhesive tape

KAL1076-J-E

Dimensions in mm
4 8 10 Tolerance

H0 W W0 W1 W2 P P0 P1 L1 t
16 10
max. max. max.

Taping is available up to dimensions d x l = 10 x 20 mm. For 16 and 18 mm taping is not available.

Please read Cautions and warnings and Important notes at the end of this document.
18 08/08

Single-ended capacitors Taping, packing and lead configurations

B41042

Kinked or cut leads

Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available on request.

Kinked leads
Last 3 digits of ordering code 001

KAL1137-5

KAL1084-A

Case size d x l mm a mm
5 x 11
8 x 15
8 x 20
10 x 16
10 x 20
10 x 25

Please read Cautions and warnings and Important notes at the end of this document.

Case size d x l mm a mm
16 x 20
16 x 25
16 x 40
18 x 20
18 x 25
18 x 40
19 08/08

Single-ended capacitors Taping, packing and lead configurations
Cut leads Last 3 digits of ordering code 002

B41042

KAL1086-R

Case size d x l mm a mm
5 x 11
8 x 15
8 x 20
10 x 16
10 x 20
10 x 25

Case size d x l mm a mm
16 x 20
16 x 25
16 x 40
18 x 20
18 x 25
18 x 40

Please read Cautions and warnings and Important notes at the end of this document.
20 08/08

Cautions and warnings

General

Also see “Important notes” on page
2 The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage, as this will result in a rapid increase of the leakage current and may damage the capacitor. It is recommended to operate the capacitor at of its rated voltage to optimize its service life.
3 The ripple current applied to the capacitor must be within the permitted range. An excessive ripple current leads to impaired electrical properties and may damage the capacitor. Note that the sum of the peak values of the ripple voltage and the DC operating voltage must not exceed the rated DC voltage.
4 Capacitors must be used within their permitted range of operating temperature. Operation at room temperature optimizes their service life.
5 Capacitors with case diameter mm are equipped with a safety vent. In capacitors fitted with a lead or soldering lug, the safety vent is usually located at the base of the case. It needs sufficient space around it to operate optimally. The following dimensions are recommended for case diameter d = 8 to 16 mm, more than 2 mm for d =18 to 35 mm, more than 3 mm and for d = 42 mm or more, more than 5 mm.
7 Gas is released through the safety vent when the pressure inside the capacitor is too high. A gaseous liquid around the safety vent does not indicate a leakage of electrolyte.
8 The capacitor should be stored under conditions of normal temperature and in a non-acid, non-alkali environment of normal humidity. Exposure to high temperatures, for example under direct sunlight, will reduce its operating life. If the capacitor is stored in an environment containing acids or alkalis, the solderability of the leads may be affected.
9 The leakage current of an aluminum electrolytic capacitor may increase after a long period of storage. After such storage, the capacitor must be aged by applying the rated operating voltage for hours before use.
10 Manual soldering:
a Soldering must be performed within the specified conditions. Bit temperature 350 °C application time of soldering iron 3 seconds.
b Ensure that the soldering iron does not touch any part of the capacitor body.

Please read Cautions and warnings and Important notes at the end of this document.
21 08/08

Cautions and warnings
11 Do not apply excessive force to the leads and terminals. Do not move the capacitor after soldering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe the following rules to prevent undue stress to the capacitor a Do not tilt or bend the capacitor after soldering. b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board.
12 The aluminum case is not insulated from the cathode. Do not place a conductor under the aluminum capacitors on the PC board as this may cause a short circuit. The case and top of capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink sleeve to ensure safe usage.
13 The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.

Please read Cautions and warnings and Important notes at the end of this document.
22 08/08

Important notes

More datasheets: B41042A2107M | B41042A2397M | B41042A2109M | B41042A3337M | B41042A2128M | B41042A2129M | B41042A2157M | B41042A2158M | B41042A2159M | B41042A2187M

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B41042A2227M Datasheet file may be downloaded here without warranties.

Datasheet ID: B41042A2227M 511411