B41002 December 2010
Part | Datasheet |
---|---|
![]() |
B41002B2227M (pdf) |
Related Parts | Information |
---|---|
![]() |
B41002A7156M |
![]() |
B41002A3336M |
![]() |
B41002A3475M |
![]() |
B41002A3476M |
![]() |
B41002A3686M |
![]() |
B41002A4106M |
![]() |
B41002A4107M |
![]() |
B41002A4156M |
![]() |
B41002A8335M |
![]() |
B41002A3227M |
![]() |
B41002A7225M |
![]() |
B41002A8334M |
![]() |
B41002A8225M |
![]() |
B41002A8224M |
![]() |
B41002A7155M |
![]() |
B41002A7106M |
![]() |
B41002A8155M |
![]() |
B41002A4226M |
![]() |
B41002A2227M |
![]() |
B41002A8475M |
![]() |
B41002A8685M |
![]() |
B41002A8684M |
![]() |
B41002B4476M |
![]() |
B41002B7226M |
![]() |
B41002B7106M |
![]() |
B41002B5476M |
![]() |
B41002A2107M |
![]() |
B41002A2226M |
![]() |
B41002A8104M |
![]() |
B41002A2336M |
![]() |
B41002A2337M |
![]() |
B41002A2476M |
![]() |
B41002A2686M |
![]() |
B41002A3107M |
![]() |
B41002A3156M |
![]() |
B41002A8474M |
![]() |
B41002A7105M |
![]() |
B41002A3226M |
![]() |
B41002B5107M |
![]() |
B41002A5475M |
![]() |
B41002A4475M |
![]() |
B41002A4476M |
![]() |
B41002A4685M |
![]() |
B41002A4686M |
![]() |
B41002A5106M |
![]() |
B41002A5107M |
![]() |
B41002A5156M |
![]() |
B41002A5226M |
![]() |
B41002A4227M |
![]() |
B41002A5336M |
![]() |
B41002A6224M |
![]() |
B41002A5476M |
![]() |
B41002A5685M |
![]() |
B41002A5686M |
![]() |
B41002A6104M |
![]() |
B41002A6105M |
![]() |
B41002A6106M |
![]() |
B41002A6154M |
![]() |
B41002A6155M |
![]() |
B41002A5335M |
![]() |
B41002A6335M |
![]() |
B41002A6156M |
![]() |
B41002A8106M |
![]() |
B41002A6685M |
![]() |
B41002A6684M |
![]() |
B41002A6475M |
![]() |
B41002A8105M |
![]() |
B41002A6474M |
![]() |
B41002A7226M |
![]() |
B41002A4336M |
![]() |
B41002A7685M |
![]() |
B41002A7335M |
![]() |
B41002A6334M |
![]() |
B41002A6226M |
![]() |
B41002B3476M |
![]() |
B41002A7476M |
![]() |
B41002B4107M |
![]() |
B41002A7475M |
![]() |
B41002A7336M |
![]() |
B41002A6225M |
![]() |
B41002A8154M |
![]() |
B41002A6336M |
![]() |
B41002B2476M |
PDF Datasheet Preview |
---|
Aluminum electrolytic capacitors Single-ended capacitors Series/Type Date: B41002 December 2010 The following products presented in this data sheet are being withdrawn. Ordering Code B41002* Substitute Product Date of Withdrawal 2013-02-22 Deadline Last Orders 2013-09-30 Last Shipments 2014-03-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Single-ended capacitors Compact 85 °C General-purpose grade capacitors Applications Low profile applications Features RoHS-compatible Ultra compact height up to 7 mm Suitable to replace low cost tantalum capacitors Useful life of 1000 h at 85 °C Construction Radial leads Aluminum case with insulating sleeve Charge-discharge proof Minus pole marking on the insulating sleeve Case with safety vent from diameter 8 mm Delivery mode Bulk Taped, Ammo pack Cut see chapter "Single-ended Taping, packing and lead configurations, Cut leads Chapter A " Kinked see chapter "Single-ended Taping, packing and lead configurations, Kinked leads Chapter A " Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details. B41002 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 32 B41002 Compact 85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz Leakage current Ileak 20 °C, after 5 minutes Useful life 85 °C VR IAC,R Requirements Shelf life Low temperature stability impedance ratio 120 Hz 63 V DC VR at room temperature 330 µF ±20% M For capacitance higher than 1000 µF add for every increase of 1000 µF. VR V DC 10 16 25 35 50 63 or 3 µA, whichever is greater > 1000 h ±20% of initial value 2 times initial specified value Ileak initial specified limit After storage for 500 h at 85 °C, the capacitors shall meet the requirement of load life test after reforming process. After test VR to be applied for 30 minutes, 24 to 48 hours before measurement. Technical data and ordering codes CR 120 Hz, 20 °C µF VR = V DC 22 33 47 68 100 220 330 VR = 10 V DC 15 22 33 47 68 100 220 VR = 16 V DC 10 15 22 33 47 68 100 220 Case dimensions dxl mm IAC,R 120 Hz, 85 °C mA Ordering code composition see below B41002A2226M*** B41002A2336M*** B41002A2476M*** B41002A2686M*** B41002A2107M*** B41002A2227M*** B41002A2337M*** B41002A3156M*** B41002A3226M*** B41002A3336M*** B41002A3476M*** B41002A3686M*** B41002A3107M*** B41002A3227M*** B41002A4475M*** B41002A4685M*** B41002A4106M*** B41002A4156M*** B41002A4226M*** B41002A4336M*** B41002A4476M*** B41002A4686M*** B41002A4107M*** B41002A4227M*** Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 4 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 4 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 8 mm Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 32 B41002 Compact 85 °C Technical data and ordering codes CR 120 Hz, 20 °C µF VR = 25 V DC 10 15 22 33 47 68 100 VR = 35 V DC 10 15 22 33 47 VR = 50 V DC Case dimensions dxl mm IAC,R 120 Hz, 85 °C mA Ordering code composition see below B41002A5335M*** B41002A5475M*** B41002A5685M*** B41002A5106M*** B41002A5156M*** B41002A5226M*** B41002A5336M*** B41002A5476M*** B41002A5686M*** B41002A5107M*** B41002A7105M*** B41002A7155M*** B41002A7225M*** B41002A7335M*** B41002A7475M*** B41002A7685M*** B41002A7106M*** B41002A7156M*** B41002A7226M*** B41002A7336M*** B41002A7476M*** B41002A6104M*** B41002A6154M*** B41002A6224M*** B41002A6334M*** B41002A6474M*** B41002A6684M*** Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 4 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 4 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 8 mm Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 32 B41002 Compact 85 °C Technical data and ordering codes CR 120 Hz, 20 °C µF VR = 50 V DC 10 15 22 33 VR = 63 V DC Case dimensions dxl mm IAC,R 120 Hz, 85 °C mA Ordering code composition see below B41002A6105M*** B41002A6155M*** B41002A6225M*** B41002A6335M*** B41002A6475M*** B41002A6685M*** B41002A6106M*** B41002A6156M*** B41002A6226M*** B41002A6336M*** B41002A8104M*** B41002A8154M*** B41002A8224M*** B41002A8334M*** B41002A8474M*** B41002A8684M*** B41002A8105M*** B41002A8155M*** B41002A8225M*** B41002A8335M*** B41002A8475M*** B41002A8685M*** B41002A8106M*** Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 016 = for taped leads, Ammo pack, lead spacing F = mm for 4 5 mm 007 = for taped leads, Ammo pack, lead spacing F = mm for 4 mm 006 = for taped leads, Ammo pack, lead spacing F = mm for 8 mm 008 = for taped leads, Ammo pack, lead spacing F = mm for 5 8 mm Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 32 B41002 Compact 85 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 Frequency factor of permissible ripple current IAC versus frequency f 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 32 B41002 Compact 85 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 4 to 18 mm as follows Lead spacing F = mm d = 4 5 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016 Dimensions in mm W0 W1 W2 P min. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 32 Lead spacing mm d = 4 mm Last 3 digits of ordering code 007 B41002 Compact 85 °C Dimensions in mm W W0 W1 W2 H0 P P0 P1 I1 Tolerrance min. max. max. max. Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. max. Leads can also run straight through the taping area. Taping is available up to dimensions d x l = 8 x 15 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 32 B41002 Compact 85 °C Lead spacing mm d = 4 8 mm Last 3 digits of ordering code 008 Lead spacing mm d = 10 mm Last 3 digits of ordering code 008 Dimensions in mm W W0 W1 W2 H0 P Tolerance min. max. max. max. Taping is available up to dimensions d x l = x 25 mm. Taping is not available for d x l = 8 x 20 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 32 Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 B41002 Compact 85 °C Dimensions in mm W0 W1 W2 P Tolerance min. max. max. Taping is available up to dimensions d x l = 16 x mm and 18 x mm. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 32 B41002 Compact 85 °C Cut or kinked leads Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request. Cut leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 002 Case size d x l mm 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 Dimensions mm a Case size d x l mm x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 32 B41002 Compact 85 °C Cut leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 32 B41002 Compact 85 °C Kinked leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 001 Case size d x l mm 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 Dimensions mm a Case size d x l mm x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 32 B41002 Compact 85 °C Kinked leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 32 B41002 Compact 85 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm. There are three configurations available Crimped leads, J leads, bent 90° leads Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 32 J leads Last 3 digits of ordering code 004 Suggestion for PCB hole diameter B41002 Compact 85 °C Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 32 B41002 Compact 85 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 32 B41002 Compact 85 °C Packing units and box dimensions Ammo pack Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Case size dxl mm 4x7 5x7 5 x 11 x 7 x 11 8x7 8 x 8 x 15 10 x 10 x 16 10 x 20 x 20 x 25 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 330 Bmax 50 Cmax 196 330 50 226 330 50 226 330 50 286 330 50 286 330 50 246 330 50 246 330 50 246 330 50 196 330 54 196 330 58 196 341 60 272 341 65 272 320 65 270 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 2000 1000 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 32 B41002 Compact 85 °C Ammo pack Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 10000 7500 5000 2500 2000 1500 2000 1500 1000 750 500 375 250 000 Taped, Kinked leads, Ammo pack bulk pcs. pcs. 2000 15000 2000 10000 2000 10000 2000 10000 2000 5000 1000 5000 1000 4000 1000 2500 2000 2500 2000 1500 1250 1000 Code F mm d mm 001 16 18 Cut leads, bulk pcs. 15000 10000 5000 4000 2500 2000 2500 2000 1500 1250 1000 500 750 500 375 002 Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 32 B41002 Compact 85 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 250 000 Taped, Ammo pack pcs. Code F mm d mm 16 18 Kinked leads, bulk pcs. 100 001 Cut leads, bulk pcs. 100 002 Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 32 B41002 Compact 85 °C Overview of packing units and code numbers for case sizes 8 x 16 x Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000 Taped, Ammo pack pcs. 1000 Code F mm d mm 006 008 5 009 Kinked leads, bulk pcs. 500 350 500 200 250 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 120 250 344 344 120 100 150 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 32 B41002 Compact 85 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 000 Taped, Ammo pack pcs. 250 Code F mm d mm 009 Kinked leads, bulk pcs. 175 150 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 32 B41002 Compact 85 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 27 of 32 B41002 Compact 85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting position of screwterminal capacitors Mounting of single-ended capacitors Robustness of terminals Soldering Safety information Reference |
More datasheets: B41002A7225M | B41002A8334M | B41002A8225M | B41002A8224M | B41002A7155M | B41002A7106M | B41002A8155M | B41002A4226M | B41002A2227M | B41002A8475M |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B41002B2227M Datasheet file may be downloaded here without warranties.