PTM200C

PTM200C Datasheet

Pushbutton Transmitter Module PTM 200C

Part	Datasheet
PTM200C	PTM200C (pdf)

PDF Datasheet Preview
DATA SHEET Pushbutton Transmitter Module PTM 200C The radio transmitter module PTM 200C from EnOcean enables the implementation of wireless remote controls without batteries. Power is provided by a built-in electrodynamic power generator. Key applications are wall-mounted flat rocker switches with 1 or 2 rockers with medial position , as well as handheld remote controls with up to 4 single pushbuttons Functional Principle A common electro-dynamic energy transducer is actuated by a bow, which can be pushed from outside the module on the left or right by an appropriate pushbutton or switch rocker. When the energy bow is pushed down, electrical energy is created and a RF telegram is transmitted including a 32-bit module ID. Releasing the energy bow generates different telegram data, so every PTM telegram contains the information that the bow was pressed or released. In addition, the radio telegram transmits the operating status of 4 contact nipples when activating the bow. This enables the identification of up to 2 appropriate switch rockers or up to 4 single pushbuttons. „Long“ or „Short“ pushbutton operation the time between pushing and releasing the pushbutton can be easily detected by the receiver. By doing that, applications such as dimming control or jalousie control including slat action are simple to implement. The PTM 200C module serves the 315 MHz air interface protocol of EnOcean. Together with the transceiver modules TCM200C or TCM220C, this module can be easily integrated in operation and control units for the implementation of different application-specific system solutions. Type PTM200C Ordering Code S3031-A200 Features overview Power supply power generation by rocker operating Electrodynamic Power Generator Antenna external whip antenna 26.8cm Frequency / Transmission power MHz / typ. 3dBm at antenna input Data rate / Modulation type 125 kbps / ASK Channels 2 with 4 action states each upper/lower pushbutton is pressed/released Telegram type RPS of type 2 allows interpretation of operating two buttons simultaneously Transmission range up to 200m free field, up to 30m indoor Energy bow travel/Operating force mm / approx. 7 N at room temperature Number of operations typ. actuations tested according to EN 60669 / VDE 0632 Module dimensions inclusive rotation axis and energy bow Operating temperature - 25 up to + 65 °C Radio signals are event controlled pushbutton is pressed / is released with button code and unique module identification fix 32 bit ID . PTM200C is approved for usage in the USA FCC , in Canada IC , and Japan MIC . EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone 34 689-77 Fax 34 689-50 Product Marketing Subject to modifications Jan 2009 Page 1/ 1

PDF Datasheet Preview

DATA SHEET

Pushbutton Transmitter Module PTM 200C

The radio transmitter module PTM 200C from EnOcean enables the implementation of wireless remote controls without batteries. Power is provided by a built-in electrodynamic power generator.

Key applications are wall-mounted flat rocker switches with 1 or 2 rockers with medial position , as well as handheld remote controls with up to 4 single pushbuttons

Functional Principle A common electro-dynamic energy transducer is actuated by a bow, which can be pushed from outside the module on the left or right by an appropriate pushbutton or switch rocker. When the energy bow is pushed down, electrical energy is created and a RF telegram is transmitted including a 32-bit module ID. Releasing the energy bow generates different telegram data, so every PTM telegram contains the information that the bow was pressed or released. In addition, the radio telegram transmits the operating status of 4 contact nipples when activating the bow. This enables the identification of up to 2 appropriate switch rockers or up to 4 single pushbuttons. „Long“ or „Short“ pushbutton operation the time
between pushing and releasing the pushbutton can be easily detected by the receiver. By doing that, applications such as dimming control or jalousie control including slat action are simple to implement.

The PTM 200C module serves the 315 MHz air interface protocol of EnOcean. Together with the transceiver modules TCM200C or TCM220C, this module can be easily integrated in operation and control units for the implementation of different application-specific system solutions.

Type PTM200C
Ordering Code S3031-A200

Features overview

Power supply
power generation by rocker operating Electrodynamic Power Generator

Antenna
external whip antenna 26.8cm

Frequency / Transmission power

MHz / typ. 3dBm at antenna input

Data rate / Modulation type
125 kbps / ASK

Channels
2 with 4 action states each upper/lower pushbutton is pressed/released

Telegram type

RPS of type 2 allows interpretation of operating two buttons simultaneously

Transmission range
up to 200m free field, up to 30m indoor

Energy bow travel/Operating force
mm / approx. 7 N at room temperature

Number of operations
typ. actuations tested according to EN 60669 / VDE 0632

Module dimensions inclusive rotation axis and energy bow

Operating temperature
- 25 up to + 65 °C

Radio signals are event controlled pushbutton is pressed / is released with button code and unique module identification fix 32 bit ID .

PTM200C is approved for usage in the USA FCC , in Canada IC , and Japan MIC .

EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany

Phone 34 689-77 Fax 34 689-50

Product Marketing Subject to modifications Jan 2009 Page 1/ 1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PTM200C Datasheet file may be downloaded here without warranties.

Datasheet ID: PTM200C 511167