HDW22LOCKWASHERPLTD

HDW22LOCKWASHERPLTD Datasheet

TITLE HDW22 LOCKWASHER FITS 10-48 BUSHING

Part	Datasheet
HDW22LOCKWASHERPLTD	HDW22LOCKWASHERPLTD (pdf)

PDF Datasheet Preview
SHEET 1 OF 1 TOOTH PROJECTION SEE NOTE #6 ISOMETRIC ON CENTER BY IN. NOTE: ALL DIMENSIONS IN MM [INCH] GENERAL TOLERANCE X.X=±0.4 X.XX=±0.25 MATERIAL CRS TYPE SAE 1050 TOOTH WIDTH SEE NOTE #5 HEAT TREAT TO RC 44-48 PLATING SPEC SULFAMATE NICKEL, DUCTILE NICKEL PLATE COPPER STRIKE NO. OF TEETH 8 EQUALLY SPACED. MININUM PROJECTION OF ANY SINGLE TOOTH SHALL BE PART TO HAVE A MIN OF THE TEETH ON ONE SIDE, 2 SIDES IS OPTIONAL. 2002/95/EC ROHS COMPLIANT 16820 1/3/07 THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE HDW22 LOCKWASHER FITS 10-48 BUSHING SCALE 1/3/2007

PDF Datasheet Preview

SHEET 1 OF 1

TOOTH PROJECTION SEE NOTE #6

ISOMETRIC

ON CENTER BY IN.

NOTE:

ALL DIMENSIONS IN MM [INCH]

GENERAL TOLERANCE X.X=±0.4 X.XX=±0.25

MATERIAL CRS TYPE SAE 1050

TOOTH WIDTH SEE NOTE #5

HEAT TREAT TO RC 44-48

PLATING SPEC SULFAMATE NICKEL, DUCTILE

NICKEL PLATE

COPPER STRIKE

NO. OF TEETH 8 EQUALLY SPACED.

MININUM PROJECTION OF ANY SINGLE

TOOTH SHALL BE PART TO HAVE A MIN OF THE

TEETH ON ONE SIDE, 2 SIDES IS OPTIONAL.
2002/95/EC ROHS COMPLIANT
16820
1/3/07

THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED

TITLE HDW22 LOCKWASHER FITS 10-48 BUSHING

SCALE
1/3/2007

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HDW22LOCKWASHERPLTD Datasheet file may be downloaded here without warranties.

Datasheet ID: HDW22LOCKWASHERPLTD 510325