PI6CX100-00WE

PI6CX100-00WE Datasheet

PI6CX100-00

Part	Datasheet
PI6CX100-00WE	PI6CX100-00WE (pdf)

PDF Datasheet Preview
• 3.3V operating voltage • Uses an external crystal • On-chip VCXO with pull range of 240ppm • VCXO tuning voltage from 0V to 3.3V • 10mA output drive at CMOS levels • Packaging Pb-free & Green : - 8-pin SOIC W PI6CX100-00 to 40 MHz, 3.3V, VCXO for General Purpose Applications The PI6CX100-00 is a low-cost, high-performance, 3.3V, VCXO available in discrete IC form with external quartz cryatal. The onchip Voltage Controlled Crystal Oscillator accepts a 0V to 3.3V input voltage that pulls the output clock frequency by ±120ppm. This device operates with an external quartz crystal specified to achieve the desired performance. The PI6CX100-00 is designed for General Purpose applications, supporting operating frequencies between and 40 MHz. Block Diagram VIN Voltage Controlled Crystal Oscillator X2 Pin Configuration Output Buffer CLKOUT CLKOUT Pin Description Pin Name Number X1, X2 CLKOUT Note 0.1µF or 0.01µF bypass capacitor is required. Type I I PWR O PWR Description Crystal Connection No Connection Voltage Input to VCXO Ground Clock Output Power Supply 1 PS8761 02/04/05 PI6CX100-00 to 40 MHz 3.3V VCXO for General Purpose Applications Maximum Ratings Above which the useful life may be impaired. For user guidelines, not tested. Storage Temperature to 125°C Ambient Temperature to 85°C Supply Voltage VDD to 7V Inputs/Outputs Voltage.............................. to VDD +0.5V Output Current Note Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Soldering Lead Temperature 10s ................................... 260°C Junction Temperature to 150°C DC Electrical Characteristics Unless otherwise specified, VDD = 3.3V, fO = 27 MHz, VIN = 1.65V, Load = 15pF, TA = 25oC Desciption Test Condidtion Min. Ordering Information Ordering Code PI6CX100-00WE Package Code W Package Type Pb-free & Green 8-pin, 150-mil SOIC Notes Thermal characteristics can be found on the company web site at Use Suffix "X" for tape and reel Number of Transistors = TBD Operating Range Industrial Pericom Semiconductor Corporation • 4 PS8761 02/04/05

PDF Datasheet Preview

• 3.3V operating voltage
• Uses an external crystal
• On-chip VCXO with pull range of 240ppm
• VCXO tuning voltage from 0V to 3.3V
• 10mA output drive at CMOS levels
• Packaging Pb-free & Green :
- 8-pin SOIC W

PI6CX100-00
to 40 MHz, 3.3V, VCXO for General Purpose Applications

The PI6CX100-00 is a low-cost, high-performance, 3.3V, VCXO available in discrete IC form with external quartz cryatal. The onchip Voltage Controlled Crystal Oscillator accepts a 0V to 3.3V input voltage that pulls the output clock frequency by ±120ppm. This device operates with an external quartz crystal specified to achieve the desired performance. The PI6CX100-00 is designed for General Purpose applications, supporting operating frequencies between and 40 MHz.

Block Diagram

VIN Voltage

Controlled

Crystal

Oscillator X2

Pin Configuration

Output Buffer

CLKOUT

CLKOUT

Pin Description

Pin Name

Number

X1, X2

CLKOUT

Note 0.1µF or 0.01µF bypass capacitor is required.

Type I

I PWR

O PWR

Description Crystal Connection

No Connection Voltage Input to VCXO

Ground Clock Output Power Supply 1

PS8761
02/04/05

PI6CX100-00 to 40 MHz 3.3V VCXO for

General Purpose Applications

Maximum Ratings

Above which the useful life may be impaired. For user guidelines, not tested.

Storage Temperature to 125°C Ambient Temperature to 85°C Supply Voltage VDD to 7V Inputs/Outputs Voltage.............................. to VDD +0.5V Output Current

Note Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Soldering Lead Temperature 10s ................................... 260°C

Junction Temperature to 150°C

DC Electrical Characteristics

Unless otherwise specified, VDD = 3.3V, fO = 27 MHz, VIN = 1.65V, Load = 15pF, TA = 25oC

Desciption

Test Condidtion

Min.
Ordering Information
Ordering Code PI6CX100-00WE

Package Code W

Package Type Pb-free & Green 8-pin, 150-mil SOIC

Notes Thermal characteristics can be found on the company web site at Use Suffix "X" for tape and reel Number of Transistors = TBD

Operating Range Industrial

Pericom Semiconductor Corporation
• 4

PS8761
02/04/05

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI6CX100-00WE Datasheet file may be downloaded here without warranties.

Datasheet ID: PI6CX100-00WE 510091