PI5V332WE

PI5V332WE Datasheet

PI5V332

Part	Datasheet
PI5V332WE	PI5V332WE (pdf)

Related Parts	Information
PI5V332Q	PI5V332Q
PI5V332QE	PI5V332QE

PDF Datasheet Preview
PI5V332 Low On-Resistance Wideband/Video Quad with Individual Control Features: • High-performance, low-cost solution to switch between video sources • Wide bandwidth 250 MHz • Low On-Resistance 3Ω • Low crosstalk at 10 MHz dB • Ultra-low quiescent power 0.1uA typical • Single supply operation +5.0V • Fast switching 10ns • High-current output 100mA • Functionally equivalent to QS4A101 • Packaging Pb-free & Green available : 16-pin 150-mil wide plastic QSOP Q 16-pin 150-mil wide plastic SOIC W Block Diagram Description: Pericom Semiconductor’s PI5V332 is a true bidirectional Quad Video Switch that is recommended for RGB, S-Video, or composite video switching applications. The individual controls allow for video, Hsync, or Vsync enable or disable. The switch can be driven from a current output RAMDAC or voltage output composite video source. Low On-Resistance and wide bandwidth make it ideal for video and other applications. Also this device has exceptionally high current capability which is far greater than most analog switches offered today. A single 5V supply is all that is required for operation. The PI5V332 offers a high-performance, low-cost solution to switch between video sources. NIC 1 IN1 2 SA 3 DA 4 IN2 5 SB 6 DB 7 GND 8 16 VCC 15 IN4 14 SD 13 DD 12 IN3 11 SC 10 DC 9 NIC Truth Table IN2 IN3 IN4 Function X SA - DA X SB - DB X SC - DC SD - DD 1 Disconnect Pin Description Pin Name Analog Video I/O Usually Inputs Select Inputs Analog Video I/O Usually Outputs Ground Power Supply PS8118A 08/23/04 Maximum Ratings Above which the useful life may be impaired. For user guidelines, not tested. Storage Temperature to +150°C Note Stresses greater than those listed under MAXIMUM RAT- Ambient Temperature with Power Applied to +85°C INGS may cause permanent damage to the device. This is Supply Voltage to Ground Potential Inputs & VCC Only ...... to +7.0V a stress rating only and functional operation of the device at these or any other conditions above those indicated in Supply Voltage to Ground Potential Outputs & D/O Only to +7.0V the operational sections of this is not implied. DC Input Voltage to +7.0V Exposure to absolute maximum rating conditions for extended periods may affect reliability. DC Output 120mA Power Dissipation 0.5W DC Electrical Characteristics Over the Operating Range, TA = to +85°C, VCC = 5V ±5% Ordering Information Ordering Code PI5V332W PI5V332WE PI5V332Q PI5V332QE Package Code W Q Package Description 16-pin SOIC Pb-free & Green, 16-pin SOIC 16-pin QSOP Pb-free & Green, 16-pin QSOP Notes Thermal characteristics can be found on the company web site at Pericom Semiconductor Corporation • 1-800-435-2336 • PS8118B 09/22/04

PDF Datasheet Preview

PI5V332

Low On-Resistance Wideband/Video Quad with Individual Control

Features:
• High-performance, low-cost solution to switch between video sources
• Wide bandwidth 250 MHz
• Low On-Resistance 3Ω
• Low crosstalk at 10 MHz dB
• Ultra-low quiescent power 0.1uA typical
• Single supply operation +5.0V
• Fast switching 10ns
• High-current output 100mA
• Functionally equivalent to QS4A101
• Packaging Pb-free & Green available :
16-pin 150-mil wide plastic QSOP Q 16-pin 150-mil wide plastic SOIC W

Block Diagram

Description:

Pericom Semiconductor’s PI5V332 is a true bidirectional Quad Video Switch that is recommended for RGB, S-Video, or composite video switching applications. The individual controls allow for video, Hsync, or Vsync enable or disable. The switch can be driven from a current output RAMDAC or voltage output composite video source.

Low On-Resistance and wide bandwidth make it ideal for video and other applications. Also this device has exceptionally high current capability which is far greater than most analog switches offered today. A single 5V supply is all that is required for operation.

The PI5V332 offers a high-performance, low-cost solution to switch between video sources.

NIC 1 IN1 2 SA 3 DA 4 IN2 5 SB 6 DB 7 GND 8
16 VCC 15 IN4 14 SD 13 DD 12 IN3 11 SC 10 DC 9 NIC

Truth Table

IN2 IN3 IN4

Function

X SA - DA

X SB - DB

X SC - DC

SD - DD
1 Disconnect

Pin Description

Pin Name

Analog Video I/O Usually Inputs

Select Inputs

Analog Video I/O Usually Outputs

Ground

Power Supply

PS8118A
08/23/04

Maximum Ratings

Above which the useful life may be impaired. For user guidelines, not tested.

Storage Temperature to +150°C Note Stresses greater than those listed under MAXIMUM RAT-

Ambient Temperature with Power Applied to +85°C INGS may cause permanent damage to the device. This is

Supply Voltage to Ground Potential Inputs & VCC Only ...... to +7.0V
a stress rating only and functional operation of the device at these or any other conditions above those indicated in

Supply Voltage to Ground Potential Outputs & D/O Only to +7.0V the operational sections of this is not implied.

DC Input Voltage to +7.0V Exposure to absolute maximum rating conditions for extended periods may affect reliability.

DC Output 120mA

Power Dissipation 0.5W

DC Electrical Characteristics Over the Operating Range, TA = to +85°C, VCC = 5V ±5%
Ordering Information
Ordering Code PI5V332W PI5V332WE PI5V332Q PI5V332QE

Package Code W Q

Package Description 16-pin SOIC Pb-free & Green, 16-pin SOIC 16-pin QSOP Pb-free & Green, 16-pin QSOP

Notes Thermal characteristics can be found on the company web site at

Pericom Semiconductor Corporation
• 1-800-435-2336
•

PS8118B
09/22/04

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI5V332WE Datasheet file may be downloaded here without warranties.

Datasheet ID: PI5V332WE 510087