PI5USB1457
Part | Datasheet |
---|---|
![]() |
PI5USB1457ZAEX (pdf) |
Related Parts | Information |
---|---|
![]() |
PI5USB1457AZAEX |
PDF Datasheet Preview |
---|
COMPANY CONFIDENTIAL PI5USB1457 charger controller that supports SDP, DCP and CDP modes àà DCP Dedicated charger port is used when enumeration is not available àà CDP Charging downstream port is used when enumeration is available, but FAST charging is requested àà SDP Standard downstream port is used for systems that can only support 500mA across Vbus Power Supply, 5V ±10% ESD protection up to +/- 4kV contact on pins 2 and 3 per IEC61000-4-2 spec and differentiates between mouse/keyboard USB Low/Full Speed device when in Sleep and Charge mode USB1457 and USB1457A versions only multiple modes of charging to ensure all of the following spec's can be met: àà USB Battery Charger spec àà USB Battery Charger spec àà USB Battery Charger spec àà YD/T-1591 charger spec àà Certain modes available can also support devices using non-standard approaches to charging, such as Apple products and RIM/Blackberry products Pb-free & Green : àà 8-Contact TDFN, ZAE 2.0mm x 2.0mm x 0.75mm USB Charger Controller supporting SDP, CDP, and DCP per BC1.2 spec Notebook PCs are used around the world to charge battery-powered handheld devices such as cell phones and MP3/MP4 players. Hand-held devices require communication with the notebook PC before they start to draw current. This ensures that the handheld device will obtain sufficient current when it wants to charge. The issue is that the notebook PC does not have a way to provide this acknowledge signal to the handheld device when the notebook is in “Sleep” mode. Pericom’s PI5USB1457 */A/B solves this issue by setting the D+/ D- pins in the notebook PC to the required signal levels during “sleep” mode. When the handheld device sees these required signal levels, it will then start to draw the current required to charge itself. Cell phones within today’s market use different communication schemes, so the switch will need to configure itself in different modes. PI5USB1457 */A/B can alternate between modes automatically, once device type is correctly detected. D+, D- and Vbus pins are protected with Pericom’s ESD protection circuits supporting ESD damage as high as +/-4kV contact per IEC61000-4-2 specification. Block Diagram References INT or INT/ Power Switch Control Y- Y+ Notes CTL is only offered on PI5USB1457B version on pin INT is only offered on PI5USB1457A version on pin 1 INT/ is only offered on PI5USB1457 version on pin 1 Plug/Unplug & Mode Detection Control Logic SB/ CTL SEL 13-0029 P-0.1 06/27/13 COMPANY CONFIDENTIAL Pin Configuration 8-Pin TDFN ZAE 8765 1234 8765 1234 PI5USB1457 USB Charger Controller IC 8765 1234 Pinout Table Ordering Information Ordering Code Package Code Package Description PI5USB1457ZAE PI5USB1457AZAE PI5USB1457BZAE Pb-free & Green, 8-pin TDFN Pb-free & Green, 8-pin TDFN Pb-free & Green, 8-pin TDFN Notes • Thermal characteristics can be found on the company web site at • E = Pb-free and Green • X suffix = Tape/Reel Top Mark UX UB Pericom Semiconductor Corporation • 1-800-435-2336 13-0029 P-0.1 06/27/13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pericom: PI5USB1457ZAEX PI5USB1457AZAEX |
More datasheets: CPDFR5V0H-HF | CFSV7 | 26222 | FGA90N33ATTU | 13910 | TEL0075 | A-DSUB-05-42-28-100 | DM74AS1004AMX | DM74AS1004AN | DM74AS1004AM |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI5USB1457ZAEX Datasheet file may be downloaded here without warranties.