PI5USB14550-AZEEX

PI5USB14550-AZEEX Datasheet


PI5USB14550-A

Part Datasheet
PI5USB14550-AZEEX PI5USB14550-AZEEX PI5USB14550-AZEEX (pdf)
Related Parts Information
PI5USB14550-AZEE PI5USB14550-AZEE PI5USB14550-AZEE
PDF Datasheet Preview
PI5USB14550-A

USB Sleep and Charge Switch for Single USB Port with Automatic Switching

USB device to draw current from Vbus when USB enumeration is not available

USB path from direct shortage to Vbus
full ESD support on exposed I/O pins 2 nd 3 per IEC61000-4-2 specification up to level 4 +/-4kV contact
multiple modes of charging to ensure all of the following spec's can be met à USB charger spec and YD/T-1591 charger spec à Certain modes available can also support devices using non-standard approach to charging, such as Apple products.
switch between modes by detecting correctly plugged in device
power supply
to enable/disable external power switch when charging is not required with proper timing requirements
power consumption to support Energy Star Compliance

ESD protection on pins #2 and #3 up to +/-4kV contact per IEC61000-4-2 standard

Pb-free & Green à 10-pin TDFN, ZE

Notebook PCs are used around the world to charge battery-powered handheld devices such as cell phones and MP3/MP4 players. Hand-held devices require communication with the notebook PC before they start to draw current. This ensures that the handheld device will obtain sufficient current when it wants to charge. The issue is that the notebook PC does not have a way to provide this acknowledge signal to the handheld device when the notebook is in “Sleep” mode.

Pericom’s PI5USB14550-A solves this issue by setting the D+/ D- pins in the notebook PC to the required signal levels during “sleep” mode. When the handheld device sees these required signal levels, it will then start to draw the current required to charge itself.

Cell phones within today’s market use different communication schemes, therefore the switch will need to configure itself in different modes. PI5USB14550-A can alternate between modes automatically, once device type is correctly detected.

All signal pins are protected with Pericom’s ESD protection circuits supporting ESD damage as high as +/-4kV contact per IEC61000-4-2 specification.

Packaging Mechanical 10-Pin TDFN ZE
Ordering Information
09-0138

For latest package info, please check:
Ordering Code

Package Code Package Type

PI5USB14550-AZEE

Pb-free & Green, 10-pin TDFN

Thermal characteristics can be found on the company web site at E = Pb-free and Green Adding an X suffix = Tape/Reel

PS9083A
11/30/10
More datasheets: DGD2104S8-13 | M13013 SL005 | M13013 SL001 | M13013 SL002 | FAN7314M | FAN7314MX | 74ACTQ00MTC | 74ACTQ00SCX | 74ACTQ00MTCX | 74ACTQ00SC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI5USB14550-AZEEX Datasheet file may be downloaded here without warranties.

Datasheet ID: PI5USB14550-AZEEX 510083