PI2PCIE412-DZHEX

PI2PCIE412-DZHEX Datasheet


PI2PCIE412-D

Part Datasheet
PI2PCIE412-DZHEX PI2PCIE412-DZHEX PI2PCIE412-DZHEX (pdf)
Related Parts Information
PI2PCIE412-DZHE PI2PCIE412-DZHE PI2PCIE412-DZHE
PDF Datasheet Preview
PI2PCIE412-D

Enhanced, 1.8V, PCI Express Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch,
w/ Single Enable
• 4 Differential Channel, 2:1 Mux/DeMux
• PCI Express signal compliance
• Low Bit-to-Bit Skew , 10ps max between '+' and '-' bits
• Low Crosstalk MHz
• Low Off Isolation MHz
• VCC Operating Range +1.5V to +2.0V
• ESD Tolerance 8kV HBM I/O 2kV HBM select pin
• Low channel-to-channel skew, 35ps max
• Packaging Pb-free & Green :
42-contact, TQFN ZH42

Pericom Semiconductor’s PI2PCIE412-D is an 8 to 4 differential channel multiplexer/demultiplexer switch. This solution can switch 2 full PCI Express lanes to one of two locations. Using a unique design technique, Pericom has been able to minimize the impedance of the switch such that the attenuation observed through the switch is negligible. The unique design technique also offers a layout targeted for PCI Express signals, which minimizes the channel to channel skew as well as channel to channel crosstalk as required by the PCI Express specification.

Application

Switch a PCI-Express lane output between two PCI Express lane inputs.

Block Diagram

A0 A1 A2 A3

A4 A5 A6 A7

Truth Table

Function AN to NB1 AN to NB2
0B1 1B1 2B1 3B1 0B2 1B2 2B2 3B2 4B1 5B1 6B1 7B1
4B2 5B2 6B2 7B2

SEL L H

Pin Description

VDD GND VDD GND
42 41 40 39

A0 2 A1 3 GND 4
37 1B1 36 2B1 35 3B1

VDD 5 A2 6 A3 7

VDD 8 SEL 9
34 0B2 33 1B2 32 2B2 31 3B2 30 VDD

GND 10
29 4B1

A4 11 A5 12 VDD 13 GND 14
28 5B1 27 6B1 26 7B1 25 4B2

A6 15 A7 16 GND 17
24 5B2 23 6B2 22 7B2
18 19 20 21

VDD GND VDD GND

PS8788B
01/23/06

PI2PCIE412-D Enhanced, 1.8V, PCI Express Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch

Maximum Ratings

Above which useful life may be impaired. For user guidelines, not tested.

Storage Temperature to +150°C Supply Voltage to Ground Potential to +2.5V DC Input Voltage to VCC DC Output Current 120mA Power Dissipation 0.5W

Note Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

DC Electrical Characteristics for Switching over Operating Range TA = to +85°C, VCC = 1.5V to 2.0V

Paramenter
Ordering Information
Ordering Code PI2PCIE412-DZHE

Package Code ZH

Package Description Pb-free & Green, 42-contact TQFN
Notes
• Thermal characteristics can be found on the company web site at
• "E" denotes Pb-free and Green
• Adding an "X" at the end of the ordering code denotes tape and reel packaging

Pericom Semiconductor Corporation
• 1-800-435-2336
• 9

PS8788B
01/23/06
More datasheets: 169-2832-016 | 169-2832-014 | 169-2832-026 | 169-2832-034 | 169-2832-050 | 169-2832-020 | 169-2832-010 | 169-2832-040 | 169-2832-060 | 169-2832-064


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI2PCIE412-DZHEX Datasheet file may be downloaded here without warranties.

Datasheet ID: PI2PCIE412-DZHEX 510040