AP451
Part | Datasheet |
---|---|
![]() |
AP451SLA (pdf) |
PDF Datasheet Preview |
---|
Not Recommended for New Design 2 Channel Linear Controller with Independent Enable Function AP451 - Features - 2 channel linear control Circuitries - Operating voltage can be up to 18V - Under Voltage Lockout UVLO Protection - Current limit external BJT only - Independent enables function - Low ESR output capacitor Multi-layer chip capacitor MLCC application - Adjustable output voltage by external resisters - 0.8V voltage reference Output - NPN or N-channel MOSFET driving capability - 8-pin SOP, PDIP Pb-Free packages - Applications - LCD Monitor/TV - XDROM, XDSL Product - M/B, VGA - Pin Assignment Top View OUT1 1 FB1 2 EN1 3 GND 4 AP451 8 Vcc 7 OUT2 6 FB2 5 EN2 SOP-8L/PDIP-8L - General Description The AP451 integrates two channel linear controllers into a single chip, mainly designs for power-supply regulator. All the functions included an on-chip 0.8V reference output, an error amplifier, UVLO, current limit. During low VCC situation, the UVLO makes sure that the outputs are off until the internal circuit is operational normally. - Pin Descriptions Pin Name No. OUT1 1 Linear Controller CH1output FB1 2 Channel 1 Voltage Feedback EN1 3 Channel 1 Enable Pin GND 4 Signal Ground EN2 5 Channel 2 Enable Pin FB2 6 Channel 2 Voltage Feedback OUT2 7 Linear Controller CH2 output Vcc 8 Supply Voltage - Ordering Information AP451 X Package S SOP-8L N PDIP-8L Packing Blank Tube A Taping This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Not Recommended for New Design 2 Channel Linear Controller with Independent Enable Function - Block Diagram AP451 FB1 EN1 VREF Bandgap 2.0V Reference 0.8V Buffer Current Limit Current Limit UVLO OUT2 OUT1 EN2 Vcc - Absolute Maximum Ratings VCC VEN VO1 / VO2 TOP TST TLEAD Parameter Supply Voltage Enable Pin Voltage CH1 / CH1Linear Driver Voltage to Ground Operating Temperature Range Storage Temperature Range Lead Temperature mm 1/16 inch from Case for 10 Seconds Rating 19 18 V 18 -20 to +85 -65 to +150 260 Unit - Recommended Operating Conditions VCC VEN VO1 / VO2 IFB RF TOP Parameter Supply Voltage Enable Pin Voltage CH1 / CH2 Linear Driver Voltage to Ground Current into Feedback Terminal Feedback Resistor Operating Free-air Temperature Min. Max. Unit According to VCC Vcc-1.5 Anachip Corp. Not Recommended for New Design 2 Channel Linear Controller with Independent Enable Function AP451 - Electrical Characteristics TA=25ÂșC, VCC=6V |
More datasheets: ATMEGA32HVE2-PLQW | ATMEGA32HVE2-PLPW | ATMEGA64HVE2-PLQW | ATMEGA64HVE2-PLPW | ACS754KCB-150-PFF | ACS754SCB-150-PSS | ACS754KCB-150-PSF | ACS754SCB-150-PSF | ACS754KCB-150-PSS | 3239 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP451SLA Datasheet file may be downloaded here without warranties.