High-side Power Distribution Switch with Enable and Flag AP2820
Part | Datasheet |
---|---|
![]() |
AP2820HMMTR-G1 (pdf) |
Related Parts | Information |
---|---|
![]() |
AP2820GM-G1 |
![]() |
AP2820EMTR-G1 |
![]() |
AP2820FM-G1 |
![]() |
AP2820FMM-G1 |
![]() |
AP2820FMMTR-G1 |
![]() |
AP2820FMTR-G1 |
![]() |
AP2820GMM-G1 |
![]() |
AP2820GMTR-G1 |
![]() |
AP2820HMM-G1 |
![]() |
AP2820EMM-G1 |
![]() |
AP2820HMTR-G1 |
![]() |
AP2820HM-G1 |
![]() |
AP2820BMM-G1 |
![]() |
AP2820AM-G1 |
![]() |
AP2820AMM-G1 |
![]() |
AP2820EM-G1 |
![]() |
AP2820BM-G1 |
![]() |
AP2820BMMTR-G1 |
![]() |
AP2820BMTR-G1 |
![]() |
AP2820CM-G1 |
![]() |
AP2820CMM-G1 |
![]() |
AP2820CMTR-G1 |
![]() |
AP2820DM-G1 |
![]() |
AP2820DMM-G1 |
![]() |
AP2820DMTR-G1 |
PDF Datasheet Preview |
---|
Advance Datasheet High-side Power Distribution Switch with Enable and Flag AP2820 The AP2820 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS ON , 60mΩ, is designed to meet USB voltage drop requirements. The IC includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout UVLO function is used to ensure the device remain off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller. The AP2820 is available in standard packages of SOIC-8 and MSOP-8. • USB Power Management • USB Bus/Self Powered Hubs • Hot-plug Power Supplies • Battery-charger Circuits • Notebooks, Motherboard PCs • Low MOSFET on Resistance 60mΩ • Compliant to USB Specifications • Available 2 Versions of Load Ability: SOIC-8 MSOP-8 Figure Package Types of AP2820 BCD Semiconductor Manufacturing Limited 1 Advance Datasheet High-side Power Distribution Switch with Enable and Flag AP2820 Pin Configuration M/MM Package Figure Pin Configuration of AP2820 Top View Pin Descriptions Pin Number 1 2, 3 4 5 6, 7, 8 Pin Name GND VIN VOUT Function Ground Supply input pin Chip enable control input, active low or high Fault flag pin, output with open drain, need a pull-up resistor in application, active low to indicate OCP or OTP Switch output voltage BCD Semiconductor Manufacturing Limited 2 Advance Datasheet High-side Power Distribution Switch with Enable and Flag AP2820 Functional Block Diagram Figure Functional Block Diagram of AP2820 BCD Semiconductor Manufacturing Limited 3 Advance Datasheet High-side Power Distribution Switch with Enable and Flag AP2820 Ordering Information AP2820 Circuit Type Condition For Continuous 2.0A Versions A Active High with Auto Discharge B Active High without Auto Discharge C Active Low with Auto Discharge D Active Low without Auto Discharge For Continuous 2.5A Versions E Active High with Auto Discharge F Active High without Auto Discharge G Active Low with Auto Discharge H Active Low without Auto Discharge G1 Green TR Tape & Reel Blank Tube Package M SOIC-8 MM MSOP-8 Package SOIC-8 Temperature Range Condition -40 to 85°C Active High AP2820AM-G1 with Auto Discharge Continuous 2.0A AP2820AMTR-G1 Active High AP2820BM-G1 without Auto Discharge Continuous 2.0A AP2820BMTR-G1 -40 to 85°C Active Low AP2820CM-G1 with Auto Discharge Continuous 2.0A AP2820CMTR-G1 Active Low AP2820DM-G1 without Auto Discharge Continuous 2.0A AP2820DMTR-G1 -40 to 85°C Active High AP2820EM-G1 with Auto Discharge Continuous 2.5A AP2820EMTR-G1 Active High AP2820FM-G1 without Auto Discharge Continuous 2.5A AP2820FMTR-G1 -40 to 85°C Active Low Advance Datasheet High-side Power Distribution Switch with Enable and Flag AP2820 Ordering Information Continued Package MSOP-8 Temperature Range Condition -40 to 85°C Active High AP2820AMM-G1 with Auto Discharge Continuous 2.0A AP2820AMMTR-G1 Active High AP2820BMM-G1 without Auto Discharge Continuous 2.0A AP2820BMMTR-G1 -40 to 85°C Active Low AP2820CMM-G1 with Auto Discharge Continuous 2.0A AP2820CMMTR-G1 Active Low AP2820DMM-G1 without Auto Discharge Continuous 2.0A AP2820DMMTR-G1 -40 to 85°C Active High AP2820EMM-G1 with Auto Discharge Continuous 2.5A AP2820EMMTR-G1 Active High AP2820FMM-G1 without Auto Discharge Continuous 2.5A AP2820FMMTR-G1 -40 to 85°C Active Low AP2820GMM-G1 with Auto Discharge Continuous 2.5A AP2820GMMTR-G1 Active Low AP2820HMM-G1 without Auto Discharge Continuous 2.5A AP2820HMMTR-G1 Marking ID 2820AMM-G1 2820AMM-G1 2820BMM-G1 2820BMM-G1 2820CMM-G1 2820CMM-G1 2820DMM-G1 2820DMM-G1 2820EMM-G1 2820EMM-G1 2820FMM-G1 2820FMM-G1 2820GMM-G1 2820GMM-G1 2820HMM-G1 2820HMM-G1 Packing Type Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel |
More datasheets: AP2820FM-G1 | AP2820FMM-G1 | AP2820FMMTR-G1 | AP2820FMTR-G1 | AP2820GMM-G1 | AP2820GMTR-G1 | AP2820HMM-G1 | AP2820EMM-G1 | AP2820HMTR-G1 | AP2820HM-G1 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP2820HMMTR-G1 Datasheet file may be downloaded here without warranties.