AP2815CMM-G1

AP2815CMM-G1 Datasheet

AP2815

Part	Datasheet
AP2815CMM-G1	AP2815CMM-G1 (pdf)

Related Parts	Information
AP2815AMM-G1	AP2815AMM-G1
AP2815DMM-G1	AP2815DMM-G1
AP2815DMTR-G1	AP2815DMTR-G1
AP2815AM-G1	AP2815AM-G1
AP2815BM-G1	AP2815BM-G1
AP2815BMM-G1	AP2815BMM-G1
AP2815BMMTR-G1	AP2815BMMTR-G1
AP2815BMTR-G1	AP2815BMTR-G1
AP2815CM-G1	AP2815CM-G1
AP2815DM-G1	AP2815DM-G1
AP2815DMMTR-G1	AP2815DMMTR-G1

PDF Datasheet Preview
Advance Datasheet 1.5A High-side Power Distribution Switch with Enable and Flag AP2815 The AP2815 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS ON , is designed to meet the USB voltage drop requirements. The IC integrates soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout UVLO function is used to ensure the device remains off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller. The AP2815 is available in standard packages of SOIC-8 and MSOP-8. • Low MOSFET on Resistance VIN=5.0V • Compliant to USB Specifications • Operating Voltage Range 2.7V to 5.5V • Low Supply Current 65µA Typ. • Low Shutdown Current 1.0µA Max • Guarantee 1.5A Continuous Load • Current Limit 1.65A Min , 2.8A Max • Under-voltage Lockout • Logic Level Enable Pin: eA/C Versions • UL Approved File No. E339337 • Nemko CB Scheme IEC60950-1, Ref. Certif No. NO64001 • USB Power Management • USB Bus/Self Powered Hubs • Hot-plug Power Supplies • Battery-Charger circuits • Notebook, Motherboard PCs SOIC-8 MSOP-8 Figure Package Types of AP2815 BCD Semiconductor Manufacturing Limited 1 Advance Datasheet 1.5A High-side Power Distribution Switch with Enable and Flag AP2815 Pin Configuration M/MM Package Figure Pin Configuration of AP2815 Top View Pin Descriptions Pin No. 1 2, 3 4 5 6, 7, 8 Name GND VIN VOUT Descriptions Ground Supply Input Pin Chip Enable, Control Input, Active Low or High Fault FLAG Pin, output with open drain, need a pull-up resistor in application, active low to indicate OCP or OTP. Output Voltage BCD Semiconductor Manufacturing Limited 2 Advance Datasheet 1.5A High-side Power Distribution Switch with Enable and Flag AP2815 Functional Block Diagram Figure Functional Block Diagram of AP2815 BCD Semiconductor Manufacturing Limited 3 Advance Datasheet 1.5A High-side Power Distribution Switch with Enable and Flag AP2815 Ordering Information AP2815 Circuit Type Condition A Active High with Auto Discharge B Active High without Auto Discharge C Active Low with Auto Discharge D Active Low without Auto Discharge G1 Green TR Tape & Reel Blank Tube Package M SOIC-8 MM MSOP-8 Product AP2815A AP2815B AP2815C AP2815D Package Temperature Range Condition SOIC-8 MSOP-8 -40 to 85°C Active High with Auto Discharge AP2815AM-G1 AP2815AMTR-G1 AP2815AMM-G1 AP2815AMMTR-G1 SOIC-8 MSOP-8 -40 to 85°C Active High without Auto Discharge AP2815BM-G1 AP2815BMTR-G1 AP2815BMM-G1 AP2815BMMTR-G1 SOIC-8 MSOP-8 -40 to 85°C Active Low with Auto Discharge AP2815CM-G1 AP2815CMTR-G1 AP2815CMM-G1 AP2815CMMTR-G1 SOIC-8 MSOP-8 -40 to 85°C Active Low without Auto Discharge AP2815DM-G1 AP2815DMTR-G1 AP2815DMM-G1 AP2815DMMTR-G1 Marking ID 2815AM-G1 2815AM-G1 2815AMM-G1 2815AMM-G1 2815BM-G1 2815BM-G1 2815BMM-G1 2815BMM-G1 2815CM-G1 2815CM-G1 2815CMM-G1 2815CMM-G1 2815DM-G1 2815DM-G1 2815DMM-G1 2815DMM-G1 Packing Type Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel

PDF Datasheet Preview

Advance Datasheet
1.5A High-side Power Distribution Switch with Enable and Flag

AP2815

The AP2815 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS ON , is designed to meet the USB voltage drop requirements. The IC integrates soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout UVLO function is used to ensure the device remains off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller.

The AP2815 is available in standard packages of SOIC-8 and MSOP-8.
• Low MOSFET on Resistance VIN=5.0V
• Compliant to USB Specifications
• Operating Voltage Range 2.7V to 5.5V
• Low Supply Current 65µA Typ.
• Low Shutdown Current 1.0µA Max
• Guarantee 1.5A Continuous Load
• Current Limit 1.65A Min , 2.8A Max
• Under-voltage Lockout
• Logic Level Enable Pin:
eA/C Versions
• UL Approved File No. E339337
• Nemko CB Scheme IEC60950-1, Ref. Certif

No. NO64001
• USB Power Management
• USB Bus/Self Powered Hubs
• Hot-plug Power Supplies
• Battery-Charger circuits
• Notebook, Motherboard PCs

SOIC-8

MSOP-8

Figure Package Types of AP2815

BCD Semiconductor Manufacturing Limited 1

Advance Datasheet
1.5A High-side Power Distribution Switch with Enable and Flag

AP2815

Pin Configuration

M/MM Package

Figure Pin Configuration of AP2815 Top View

Pin Descriptions

Pin No.
1 2, 3 4 5 6, 7, 8

Name

GND VIN

VOUT

Descriptions

Ground

Supply Input Pin

Chip Enable, Control Input, Active Low or High Fault FLAG Pin, output with open drain, need a pull-up resistor in application, active low to indicate OCP or OTP. Output Voltage

BCD Semiconductor Manufacturing Limited 2

Advance Datasheet
1.5A High-side Power Distribution Switch with Enable and Flag

AP2815

Functional Block Diagram

Figure Functional Block Diagram of AP2815

BCD Semiconductor Manufacturing Limited 3

Advance Datasheet
1.5A High-side Power Distribution Switch with Enable and Flag

AP2815
Ordering Information

AP2815

Circuit Type

Condition A Active High with Auto Discharge B Active High without Auto Discharge C Active Low with Auto Discharge D Active Low without Auto Discharge

G1 Green

TR Tape & Reel Blank Tube

Package M SOIC-8 MM MSOP-8

Product

AP2815A AP2815B AP2815C AP2815D

Package

Temperature

Range

Condition

SOIC-8 MSOP-8
-40 to 85°C

Active High with Auto Discharge

AP2815AM-G1 AP2815AMTR-G1 AP2815AMM-G1 AP2815AMMTR-G1

SOIC-8 MSOP-8
-40 to 85°C

Active High without Auto

Discharge

AP2815BM-G1 AP2815BMTR-G1 AP2815BMM-G1 AP2815BMMTR-G1

SOIC-8 MSOP-8
-40 to 85°C

Active Low with Auto Discharge

AP2815CM-G1 AP2815CMTR-G1 AP2815CMM-G1 AP2815CMMTR-G1

SOIC-8 MSOP-8
-40 to 85°C

Active Low without Auto

Discharge

AP2815DM-G1 AP2815DMTR-G1 AP2815DMM-G1 AP2815DMMTR-G1

Marking ID
2815AM-G1 2815AM-G1 2815AMM-G1 2815AMM-G1 2815BM-G1 2815BM-G1 2815BMM-G1 2815BMM-G1 2815CM-G1 2815CM-G1 2815CMM-G1 2815CMM-G1 2815DM-G1 2815DM-G1 2815DMM-G1 2815DMM-G1

Packing Type

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP2815CMM-G1 Datasheet file may be downloaded here without warranties.

Datasheet ID: AP2815CMM-G1 509828