AP2810DMTR-G1

AP2810DMTR-G1 Datasheet


AP2810

Part Datasheet
AP2810DMTR-G1 AP2810DMTR-G1 AP2810DMTR-G1 (pdf)
Related Parts Information
AP2810BMMTR-G1 AP2810BMMTR-G1 AP2810BMMTR-G1
AP2810DMMTR-G1 AP2810DMMTR-G1 AP2810DMMTR-G1
AP2810DMM-G1 AP2810DMM-G1 AP2810DMM-G1
AP2810DM-G1 AP2810DM-G1 AP2810DM-G1
AP2810CMTR-G1 AP2810CMTR-G1 AP2810CMTR-G1
AP2810CMMTR-G1 AP2810CMMTR-G1 AP2810CMMTR-G1
AP2810BMTR-G1 AP2810BMTR-G1 AP2810BMTR-G1
AP2810BMM-G1 AP2810BMM-G1 AP2810BMM-G1
AP2810BM-G1 AP2810BM-G1 AP2810BM-G1
AP2810AMM-G1 AP2810AMM-G1 AP2810AMM-G1
AP2810AM-G1 AP2810AM-G1 AP2810AM-G1
AP2810CM-G1 AP2810CM-G1 AP2810CM-G1
AP2810CMM-G1 AP2810CMM-G1 AP2810CMM-G1
PDF Datasheet Preview
Advance Datasheet
1.0A High-side Power Distribution Switch with Enable and Flag

AP2810

The AP2810 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS ON , 60mΩ, design easily to meet USB voltage drop requirements. It includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout UVLO function is used to ensure the device remain off unless there is a valid input voltage present. A Flag output is available to indicate fault conditions to the local USB controller.

The AP2810 is available in standard packages of SOIC-8 and MSOP-8.
• Low MOSFET on Resistance:
• Compliant to USB Specifications
• Operating Voltage Range 2.7V to 5.5V
• Low Supply Current 65µA Typ
• Low Shutdown Current 1.0µA Max
• Guarantee 1.0A Continuous Load
• Current Limit 1.1A Min , 2.1A Max
• Under-voltage Lockout
• Logic Level Enable Pin Available in

A/C Versions
• USB Power Management
• USB Bus/Self Powered Hubs
• Hot-plug Power Supplies
• Battery-charger Circuits
• Notebooks, Motherboard PCs

SOIC-8

MSOP-8

Figure Package Types of AP2810

BCD Semiconductor Manufacturing Limited 1

Advance Datasheet
1.0A High-side Power Distribution Switch with Enable and Flag

AP2810

Pin Configuration

M/MM Package

Figure Pin Configuration of AP2810 Top View

Pin Descriptions

Pin Number
1 2, 3 4 5 6, 7, 8

Pin Name

GND VIN

VOUT

Function

Ground

Supply input pin

Chip enable control input, active low or high Fault flag pin, output with open drain, need a pull-up resistor in application, active low to indicate OCP or OTP Switch output voltage

BCD Semiconductor Manufacturing Limited 2

Advance Datasheet
1.0A High-side Power Distribution Switch with Enable and Flag

AP2810

Functional Block Diagram

Figure Functional Block Diagram of AP2810

BCD Semiconductor Manufacturing Limited 3

Advance Datasheet
1.0A High-side Power Distribution Switch with Enable and Flag

AP2810
Ordering Information

AP2810

Circuit Type

Condition A Active High with Auto Discharge B Active High without Auto Discharge C Active Low with Auto Discharge D Active Low without Auto Discharge

G1 Green

TR Tape & Reel Blank Tube

Package M SOIC-8 MM MSOP-8

Product Package Condition

Temperature Part Number Range Green

AP2810A

SOIC-8 MSOP-8

Active High with Auto Discharge
-40 to 85°C

AP2810AM-G1 AP2810AMTR-G1 AP2810AMM-G1 AP2810AMMTR-G1

AP2810B

SOIC-8

Active High
without Auto Discharge MSOP-8
-40 to 85°C

AP2810BM-G1 AP2810BMTR-G1 AP2810BMM-G1 AP2810BMMTR-G1

AP2810C

SOIC-8 MSOP-8

Active Low with Auto Discharge
-40 to 85°C

AP2810CM-G1 AP2810CMTR-G1 AP2810CMM-G1 AP2810CMMTR-G1

AP2810D

SOIC-8

Active Low
without Auto Discharge MSOP-8
-40 to 85°C

AP2810DM-G1 AP2810DMTR-G1 AP2810DMM-G1 AP2810DMMTR-G1

Marking ID Green
2810AM-G1 2810AM-G1 2810AMM-G1 2810AMM-G1 2810BM-G1 2810BM-G1 2810BMM-G1 2810BMM-G1 2810CM-G1 2810CM-G1 2810CMM-G1 2810CMM-G1 2810DM-G1 2810DM-G1 2810DMM-G1 2810DMM-G1

Packing Type

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel

Tube Tape & Reel
More datasheets: AP2810DMMTR-G1 | AP2810DMM-G1 | AP2810DM-G1 | AP2810CMTR-G1 | AP2810CMMTR-G1 | AP2810BMTR-G1 | AP2810BMM-G1 | AP2810BM-G1 | AP2810AMM-G1 | AP2810AM-G1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP2810DMTR-G1 Datasheet file may be downloaded here without warranties.

Datasheet ID: AP2810DMTR-G1 509827