AP1118D50L-13
AP1118D50L-13 Datasheet
AP1118
| Part | Datasheet |
|---|---|
AP1118D50L-13 |
AP1118D50L-13 (pdf) |
| Related Parts | Information |
|---|---|
AP1118S18L-13 |
AP1118S18L-13 |
|
AP1118S15L-13 |
AP1118S15L-13 |
AP1118D18L-13 |
AP1118D18L-13 |
|
AP1118S25L-13 |
AP1118S25L-13 |
AP1118D12L-13 |
AP1118D12L-13 |
|
AP1118S33L-13 |
AP1118S33L-13 |
|
AP1118S50L-13 |
AP1118S50L-13 |
|
AP1118S90L-13 |
AP1118S90L-13 |
AP1118D90L-13 |
AP1118D90L-13 |
AP1118D25L-13 |
AP1118D25L-13 |
AP1118D15L-13 |
AP1118D15L-13 |
|
AP1118S12L-13 |
AP1118S12L-13 |
AP1118D33L-13 |
AP1118D33L-13 |
| PDF Datasheet Preview |
|---|
| Not Recommended for New Design AP1118 1A Positive Low Dropout Fixed-Mode Regulator With EN Function - Features •1.4V maximum dropout at full load current •Fast transient response •Output current limiting •Built-in thermal shutdown •Packages TO220-5, TO252-5, TO263-5, SOP8 •Good noise rejection •Fixed Output 1.5V, 1.8V, 2.5V, 3.3V, 5.0V, 9.0V, 12V •Enable function - Applications • PC peripheral • Communication • CDROM.. - General Description AP1118 is a low dropout positive fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. AP1118 is also well suited for other applications such as VGA cards. AP1118 is guaranteed to have <1.4V dropout at full load current making it ideal to provide well regulated outputs of to 12V with up to 18V input supply. The AP1118 offers a TTL Logic compatible enable pin. - Ordering Information AP 1118 X XX X Low Dropout Regulator Package D TO252-5L T TO220-5L K TO263-5L S SOP-8L Vout 15 1.5V 18 1.8V 25 2.5V 33 3.3V 50 5.0V 90 9.0V 12 12V Lead Free Blank Normal L Lead Free Package Packing Blank Tube A Taping - Typical Circuit Tab is Vout Vin EN Vout NC GND C1 100uF 3.3V/1A C2 100uF 5V/3.3V fixed output This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Not Recommended for New Design AP1118 1A Positive Low Dropout Fixed-Mode Regulator With EN Function - Connection Diagram 5 PIN TO220 5 4 3 2 1 Tab is Vout Vin EN Vout NC GND Tab is Vout 5 PIN TO252/TO263 Top View 5 4 3 2 1 Vin EN Vout NC GND Vout SOP-8L Top View Vin EN Vout GND - Pin Descriptions NAME GND Vout EN NC FUNCTION Ground. The output of the regulator. A minimum of 10uF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than Vout in order for the device to regulate properly. The input pin of regulator. TTL/CMOS compatible input Logic high = disable output, Logic Low or open = output enable. internal pull-down resistor~100 K . |
| More datasheets: 9310-36 | AP1118S18L-13 | AP1118S15L-13 | AP1118D18L-13 | AP1118S25L-13 | AP1118D12L-13 | AP1118S33L-13 | AP1118S50L-13 | AP1118S90L-13 | AP1118D90L-13 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP1118D50L-13 Datasheet file may be downloaded here without warranties.