WH-900-PDCN

WH-900-PDCN Datasheet

Example Part Number WH-900-PDEW

Part	Datasheet
WH-900-PDCN	WH-900-PDCN (pdf)

PDF Datasheet Preview
Industrial Grade Whisker.Hub Pro.Hub The Whisker.IO Pro.Hub is purpose built for extreme use in outdoor and industrial applications. • Plug and play operation • Ethernet, WiFi and Cellular options • Data buffering during loss of connectivity • Integrated CanBus, ModbusTCP and ModbusRTU RS-485 protocol* • Integrated Digital and Analog I/O* • Supports all Whisker.IO Cloud services • Works with 3rd party platforms via Whisker.IO Forwarding • IP65 rate enclosure, wall and pole mounting • Flexible power options o Power over Ethernet o 8-48V DC o Solar panel* • Supports two-way communication with field devices monitor and control • Communicate with field devices over distances more than a 1 mile. * Future Feature limitations with a single channel, this hub can process about 1,800 messages an hour. The following table estimates device capacity for several different update rates. Update Rate 5 minute 1 hour 4 hour 24 hour # Devices estimated 250 1500 5000 10,000+ This hub supports two way communications with field devices that support the Whisker.IO protocol. For battery powered devices, the hub will queue down-stream messages commands and send them to the device when it reports in at its sampling interval therefore, the command latency is equivalent to the update rate of the device. For line powered devices, commands are sent immediately, with a latency of less than 1 second. Mechanical Throughput The number of devices that can be supported by this hub varies with the reporting rate of the connected devices. This is a single channel hub, which ultimately determines its 2017 Digital Six Laboratories Inc 1\|Page - Whisker.IO, Whisker.Hub, Pro.Hub, and Whisker.Block are trademarks of Digital Six Laboratories LLC, All Rights Reserved 1 844 365-8647 telephone Robustness and Reliability If the hub loses connectivity to the Internet, it will buffer all incoming messages from field devices to storage on the SD card. When hub connectivity is restored, the messages will be sent to the cloud for storage and forwarding. In the event of catastrophic failure, the data on the SD card can be recovered using our Data Recovery App Windows . The Pro.Hub can be configured with battery back-up that will allow the hub to continue normal operation for up to 24 hours*. If power is lost on hubs equipped with battery back-up, the hub will notify the Whisker.IO cloud of the failure, allowing text and email alerts to be sent to specified contacts. Whisker.IO Services This hub supports all Whisker.IO services: Storage Devices that are configured with the storage service will persist their historic data in the Whisker.IO cloud, making it available for visualization and analysis using our Whisker.IO Portal web based software. Alerting Rules based alerting allows a text or email to be sent when the specified condition is met and when it clears. Forwarding The forwarding service allows two way communications between Whisker.IO devices and third party platforms such as Amazon, ThingLogix, etc. Services are provided for a monthly fee per device and service. Services can be configured in the Whisker.IO Portal at Connectivity Options Every Whisker.IO hub can connect to the Internet via Ethernet. For applications that require alternate methods of connectivity, WiFi and Cellular are available. Our cellular-enabled hubs are shipped with a data plan that costs per month, regardless of the number of devices that are attached. The hub can be configured for operation with Verizon, AT&T and other carriers. Installation and Setup All Whisker.IO hubs are truly plug-and-play, requiring no provisioning or setup in the field. Simply mount the hub, connect it to power, and wait for all the status lights to come on. Once a hub is installed, it is automatically configured to work with devices within its transmission range. Ordering Information Example Part Number WH-900-PDEW Sec. Connectivity Option, E=Ethernet, C=Cellular, W=WiFi, N=None Pri. Connectivity Option, E=Ethernet, C=Cellular, W=WiFi Power type, A=120V AC, Z=230VAC,P=PoE, D=8-30VDC, SP=roS.oHlaurb version Whisker.IO Frequency 900=902-928MHz 868=868-870MHz 2017 Digital Six Laboratories Inc 2\|Page - Whisker.IO, Whisker.Hub, Pro.Hub, and Whisker.Block are trademarks of Digital Six Laboratories LLC, All Rights Reserved 1 844 365-8647 telephone

PDF Datasheet Preview

Industrial Grade Whisker.Hub

Pro.Hub

The Whisker.IO Pro.Hub is purpose built for extreme use in outdoor and industrial applications.
• Plug and play operation
• Ethernet, WiFi and Cellular options
• Data buffering during loss of connectivity
• Integrated CanBus, ModbusTCP and

ModbusRTU RS-485 protocol*
• Integrated Digital and Analog I/O*
• Supports all Whisker.IO Cloud services
• Works with 3rd party platforms via

Whisker.IO Forwarding
• IP65 rate enclosure, wall and pole
mounting
• Flexible power options
o Power over Ethernet o 8-48V DC o Solar panel*
• Supports two-way communication with field devices monitor and control
• Communicate with field devices over distances more than a 1 mile.
* Future Feature
limitations with a single channel, this hub can process about 1,800 messages an hour. The following table estimates device capacity for several different update rates.

Update Rate 5 minute 1 hour 4 hour 24 hour
# Devices estimated 250 1500 5000 10,000+

This hub supports two way communications with field devices that support the Whisker.IO protocol. For battery powered devices, the hub will queue down-stream messages commands and send them to the device when it reports in at its sampling interval therefore, the command latency is equivalent to the update rate of the device. For line powered devices, commands are sent immediately, with a latency of less than 1 second.

Mechanical

Throughput

The number of devices that can be supported by this hub varies with the reporting rate of the connected devices. This is a single channel hub, which ultimately determines its
2017 Digital Six Laboratories Inc
1|Page
- Whisker.IO, Whisker.Hub, Pro.Hub, and Whisker.Block are trademarks of Digital Six Laboratories LLC, All Rights Reserved
1 844 365-8647 telephone

Robustness and Reliability

If the hub loses connectivity to the Internet, it will buffer all incoming messages from field devices to storage on the SD card. When hub connectivity is restored, the messages will be sent to the cloud for storage and forwarding. In the event of catastrophic failure, the data on the SD card can be recovered using our Data Recovery App Windows .

The Pro.Hub can be configured with battery back-up that will allow the hub to continue normal operation for up to 24 hours*. If power is lost on hubs equipped with battery back-up, the hub will notify the Whisker.IO cloud of the failure, allowing text and email alerts to be sent to specified contacts.

Whisker.IO Services

This hub supports all Whisker.IO services:

Storage Devices that are configured with the storage service will persist their historic data in the Whisker.IO cloud, making it available for visualization and analysis using our Whisker.IO Portal web based software.

Alerting Rules based alerting allows a text or email to be sent when the specified condition is met and when it clears.

Forwarding The forwarding service allows two way communications between Whisker.IO devices and third party platforms such as Amazon, ThingLogix, etc.

Services are provided for a monthly fee per device and service. Services can be configured in the Whisker.IO Portal at

Connectivity Options

Every Whisker.IO hub can connect to the Internet via Ethernet.

For applications that require alternate methods of connectivity, WiFi and Cellular are available.

Our cellular-enabled hubs are shipped with a data plan that costs per month, regardless of the number of devices that are attached. The hub can be configured for operation with Verizon, AT&T and other carriers.

Installation and Setup

All Whisker.IO hubs are truly plug-and-play, requiring no provisioning or setup in the field. Simply mount the hub, connect it to power, and wait for all the status lights to come on.

Once a hub is installed, it is automatically configured to work with devices within its transmission range.
Ordering Information

Example Part Number WH-900-PDEW

Sec. Connectivity Option, E=Ethernet, C=Cellular, W=WiFi, N=None Pri. Connectivity Option, E=Ethernet, C=Cellular, W=WiFi Power type, A=120V AC, Z=230VAC,P=PoE, D=8-30VDC, SP=roS.oHlaurb version

Whisker.IO Frequency 900=902-928MHz 868=868-870MHz
2017 Digital Six Laboratories Inc
2|Page
- Whisker.IO, Whisker.Hub, Pro.Hub, and Whisker.Block are trademarks of Digital Six Laboratories LLC, All Rights Reserved
1 844 365-8647 telephone

More datasheets: SCM059100 | SCM053100L | SCM059100L | SCM053100 | SCM051100L | SCM051100 | M3633 SL005 | M3633 SL001 | M3633 SL002 | HD-7601

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived WH-900-PDCN Datasheet file may be downloaded here without warranties.

Datasheet ID: WH-900-PDCN 508359