XEB09-C

XEB09-C Datasheet

Part	Datasheet
XEB09-C	XEB09-C (pdf)

Related Parts	Information
XEB09-CISA	XEB09-CISA
XEB09-CIPA	XEB09-CIPA
XEB09-BIS	XEB09-BIS
XEB09-BCSA	XEB09-BCSA
XEB09-I	XEB09-I
XEB09-BISA	XEB09-BISA
XEB09-BCS	XEB09-BCS

PDF Datasheet Preview
XPress Ethernet Bridge 900 MHz Wireless Ethernet Bridge The XPress Ethernet Bridge provides a secure point-topoint or point-to-multipoint IP connection without the expense and limitations of physical cabling. Overview The XPress Ethernet Bridge replaces costly wiring with a solution that can wirelessly connect industrial PLCs, digital signs, security cameras, access controllers and more. With a range of up to 15 miles, the ability to transmit through as many as 10 standard walls, a Mbps data rate, and the added range and capabilities of the 900 MHz band, the easy-to-use, longrange XPress Ethernet Bridge communicates where Wi-Fi and other wireless data products fall short. The XPress Ethernet Bridge features a built-in spectrum analyzer, allowing users to monitor RF interference. Frequency agility enables the product to automatically select the best available radio channel at start-up, monitor the signal-to-noise ratio and move the network to a new channel if necessary. A web interface simplifies installation, allows users to monitor packet success and signal strength and facilitates remote troubleshooting. The XPress Ethernet Bridge is housed in a weatherproof enclosure. It is available in pre-paired units or single units for point-to-multipoint applications. Target Applications Industrial Automation Building Automation Remote Devices Smart Energy Application Highlight Features/Benefits • Easy-to-use web interface simplifies configuration and remote troubleshooting • Check packet success and signal strength with the web interface • Outdoor line-of-sight range of up to 15 miles with high gain antenna • AES encryption, FIPS 197 and optional FIPS 140-2 provide secure communication • Built-in NAT supports multiple IP client devices • Frequency agility ensures reliable connection between radios • Monitor RF interference with built-in spectrum analyzer Specifications XPress Ethernet Bridge Performance Indoor/Urban Range Outdoor/RF Line-of-Sight Range Transmit Power Output Throughput Data Rate Up to 1000 ft 300 m w/ dB dipole antenna Up to 2 miles km w/ dB dipole antenna, Up to 15 miles 24 km w/ high-gain antenna 125 mW +21 dBm , 4W EIRP w/ 15 dBi antenna 935 Kbps RF Data Rate Mbps Receiver Sensitivity -97 dBm BER Suppported Protocols Browser Management Tools Data Connection TCP/IP, Rockwell RSLinx EtherNet/IP, CSP , Modbus/TCP QoS statistics, Network settings, Spectrum analyzer, Firmware upgrading 10/100Base-T RJ-45, Auto MDI/MDIX Interference Immunity DSSS Direct Sequence Spread Spectrum Encryption 128-bit AES, FIPS 197/NIST certified optional FIPS 140-2 Radio Channels/Bandwidth Frequency Band Frequency Agility Manual Frequency Mode Status LEDs 12 channels 6 in international version with MHz spacing and MHz occupied bandwidth ISM 902-928 MHz 915-928 MHz international version Radio channel automatically selected and adaptively optimized Channel selected with DIP switch or web browser interface Power, RF TX/RX, Ethernet link, channel, link quality

PDF Datasheet Preview

XPress Ethernet Bridge
900 MHz Wireless Ethernet Bridge

The XPress Ethernet Bridge provides a secure point-topoint or point-to-multipoint IP connection without the expense and limitations of physical cabling.

Overview

The XPress Ethernet Bridge replaces costly wiring with a solution that can wirelessly connect industrial PLCs, digital signs, security cameras, access controllers and more. With a range of up to 15 miles, the ability to transmit through as many as 10 standard walls, a Mbps data rate, and the added range and capabilities of the 900 MHz band, the easy-to-use, longrange XPress Ethernet Bridge communicates where Wi-Fi and other wireless data products fall short.

The XPress Ethernet Bridge features a built-in spectrum analyzer, allowing users to monitor RF interference. Frequency agility enables the product to automatically select the best available radio channel at start-up, monitor the signal-to-noise ratio and move the network to a new channel if necessary. A web interface simplifies installation, allows users to monitor packet success and signal strength and facilitates remote troubleshooting.

The XPress Ethernet Bridge is housed in a weatherproof enclosure. It is available in pre-paired units or single units for point-to-multipoint applications.

Target Applications

Industrial Automation

Building Automation

Remote Devices

Smart Energy

Application Highlight

Features/Benefits
• Easy-to-use web interface simplifies configuration and remote troubleshooting
• Check packet success and signal strength with the web interface
• Outdoor line-of-sight range of up to 15 miles with high gain antenna
• AES encryption, FIPS 197 and optional FIPS 140-2 provide secure communication
• Built-in NAT supports multiple IP client devices
• Frequency agility ensures reliable connection
between radios
• Monitor RF interference with built-in spectrum
analyzer

Specifications

XPress Ethernet Bridge

Performance

Indoor/Urban Range Outdoor/RF Line-of-Sight Range Transmit Power Output Throughput Data Rate

Up to 1000 ft 300 m w/ dB dipole antenna Up to 2 miles km w/ dB dipole antenna, Up to 15 miles 24 km w/ high-gain antenna
125 mW +21 dBm , 4W EIRP w/ 15 dBi antenna 935 Kbps

RF Data Rate

Mbps

Receiver Sensitivity
-97 dBm BER

Suppported Protocols Browser Management Tools Data Connection

TCP/IP, Rockwell RSLinx EtherNet/IP, CSP , Modbus/TCP QoS statistics, Network settings, Spectrum analyzer, Firmware upgrading
10/100Base-T RJ-45, Auto MDI/MDIX

Interference Immunity

DSSS Direct Sequence Spread Spectrum

Encryption
128-bit AES, FIPS 197/NIST certified optional FIPS 140-2

Radio Channels/Bandwidth Frequency Band Frequency Agility Manual Frequency Mode Status LEDs
12 channels 6 in international version with MHz spacing and MHz occupied bandwidth ISM 902-928 MHz 915-928 MHz international version

Radio channel automatically selected and adaptively optimized Channel selected with DIP switch or web browser interface Power, RF TX/RX, Ethernet link, channel, link quality

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived XEB09-C Datasheet file may be downloaded here without warranties.

Datasheet ID: XEB09-C 509683