SER0002

SER0002 Datasheet

Hitec HS422 Servo

Part	Datasheet
SER0002	SER0002 (pdf)

PDF Datasheet Preview
Hitec HS422 Servo SKU:SER0002 INTRODUCTION The HS-422 has been around for a while and for a good reason, durability and the ability to be easily modified. For inexpensive robotic applications this the perfect servo. It can easily be modified for wheeled applications since the output shaft is supported on the botton and top with bronze bushings and the potentiometer is indirect drive. The circuit board is also seperate from the motor so the potentiometer can be easily accessed. Simply a great servo at a great price. SPECIFICATION • Control System +Pulse Width Control 1500usec Neutral • Required Pulse 3-5 Volt Peak to Peak Square Wave • Operating Voltage Volts • Operating Temperature Range -20 to +60 Degree C • Operating Speed 4.8V 0.21sec/60° at no load • Operating Speed 6.0V 0.16sec/60° at no load • Stall Torque 4.8V oz/in. 3.3kg.cm • Stall Torque 6.0V oz/in. 4.1kg.cm • Operating Angle 45 Deg. one side pulse traveling 400usec • 360 Modifiable Yes • Direction Clockwise/Pulse Traveling 1500 to 1900usec • Current Drain 4.8V 8mA/idle and 150mA no load operating • Current Drain 6.0V 8.8mA/idle and 180mA no load operating • Dead Band Width 8usec • Motor Type 3 Pole Ferrite • Potentiometer Drive Indirect Drive • Bearing Type Dual Oilite Bushing • Gear Type Nylon • Connector Wire Length 300mm=11.81in • Dimensions See Schematics • Weight 1.6oz 45.5g A = 19.82mm=0.78in B = 13.47mm=0.53in C = 33.79mm=1.33in D = 10.17mm=0.4in E = 9.66mm=0.38in F = 30.22mm=1.19in G = 11.68mm=0.46in H = 26.67mm=1.05in J = 52.84mm=2.08in K = 9.35mm=0.37in L = 4.38mm=0.17in M = 39.88mm=1.57in X = 3.05mm=0.12in SHIPPING LIST • Hitec HS422 Servo x1 5-30-17

PDF Datasheet Preview

Hitec HS422 Servo

SKU:SER0002

INTRODUCTION

The HS-422 has been around for a while and for a good reason, durability and the ability to be easily modified. For inexpensive robotic applications this the perfect servo. It can easily be modified for wheeled applications since the output shaft is supported on the botton and top with bronze bushings and the potentiometer is indirect drive. The circuit board is also seperate from the motor so the potentiometer can be easily accessed. Simply a great servo at a great price.

SPECIFICATION
• Control System +Pulse Width Control 1500usec Neutral
• Required Pulse 3-5 Volt Peak to Peak Square Wave
• Operating Voltage Volts
• Operating Temperature Range -20 to +60 Degree C
• Operating Speed 4.8V 0.21sec/60° at no load
• Operating Speed 6.0V 0.16sec/60° at no load
• Stall Torque 4.8V oz/in. 3.3kg.cm
• Stall Torque 6.0V oz/in. 4.1kg.cm
• Operating Angle 45 Deg. one side pulse traveling 400usec
• 360 Modifiable Yes
• Direction Clockwise/Pulse Traveling 1500 to 1900usec
• Current Drain 4.8V 8mA/idle and 150mA no load operating
• Current Drain 6.0V 8.8mA/idle and 180mA no load operating
• Dead Band Width 8usec
• Motor Type 3 Pole Ferrite
• Potentiometer Drive Indirect Drive
• Bearing Type Dual Oilite Bushing
• Gear Type Nylon
• Connector Wire Length 300mm=11.81in
• Dimensions See Schematics
• Weight 1.6oz 45.5g

A = 19.82mm=0.78in B = 13.47mm=0.53in C = 33.79mm=1.33in D = 10.17mm=0.4in E = 9.66mm=0.38in F = 30.22mm=1.19in G = 11.68mm=0.46in H = 26.67mm=1.05in J = 52.84mm=2.08in K = 9.35mm=0.37in L = 4.38mm=0.17in M = 39.88mm=1.57in X = 3.05mm=0.12in

SHIPPING LIST
• Hitec HS422 Servo x1
5-30-17

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SER0002 Datasheet file may be downloaded here without warranties.

Datasheet ID: SER0002 509137