ROB0005

ROB0005 Datasheet

2WD Mobile Platform for Arduino SKU:ROB0005

Part	Datasheet
ROB0005	ROB0005 (pdf)

PDF Datasheet Preview
2WD Mobile Platform for Arduino SKU:ROB0005 Contents • 1 Introduction • 2 Specification • 3 Motor Specification Introduction 2WD Mobile Platform for Arduino SKU:ROB0005 This 2WD Mobile Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as a kit which includes two drive motors, wheels and rear caster ball , frame and all mounting hardware. The Arduino 2WD four-wheel-drive robot is based on the DFRobot and widely used as selfdeveloped control panel for Arduino platform. The platform 51 can be used not only to control STC controller, AVR controller but also for the world wide promotion for the use of Arduino controller. The Arduino platform has world's large number of users and abundant examples are available of procedures used. The two differential drives, the use of near zero turning radius, high-strength aluminum alloy body materials, plus high-quality high-speed motor and a flexible rubber wheel makes it suitable for indoor flat road surface. To make this lovely robot run, you probably need a motor controller and MCU. Our DFRduino Romeo-All in one Controller SKU:DFR0004 is an ideal candidate for this. Specification • 2WD Arduino mobile robot development platform • Low-cost Arduino microcontroller mobile platform • Two differential drive • Caster ball included • Complete chassis with mounting hardware • Dimensions 170mm diameter base • Weight 400g Motor Specification • Gear Ratio 1:120 • No-load speed 3V :100RPM • No-load speed 6V :200RPM • No-load current 3V :60mA • No-load current 6V :71mA • Stall current 3V :260mA • Stall current 6V :470mA • Torgue 3V 1.2Kgcm • Torque 6V 1.92Kgcm • Size 55mm x 48.3mm x 23mm • Weight:45g Powered By DFRobot 2008-2016

PDF Datasheet Preview

2WD Mobile Platform for Arduino SKU:ROB0005

Contents
• 1 Introduction
• 2 Specification
• 3 Motor Specification

Introduction
2WD Mobile Platform for Arduino SKU:ROB0005 This 2WD Mobile Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as a kit which includes two drive motors, wheels and rear caster ball , frame and all mounting hardware. The Arduino 2WD four-wheel-drive robot is based on the DFRobot and widely used as selfdeveloped control panel for Arduino platform. The platform 51 can be used not only to control STC controller, AVR controller but also for the world wide promotion for the use of Arduino controller. The Arduino platform has world's large number of users and abundant examples are available of procedures used. The two differential drives, the use of near zero turning radius, high-strength aluminum alloy body materials, plus high-quality high-speed motor and a flexible rubber wheel makes it suitable for indoor flat road surface. To make this lovely robot run, you probably need a motor controller and MCU. Our DFRduino Romeo-All in one Controller SKU:DFR0004 is an ideal candidate for this.

Specification
• 2WD Arduino mobile robot development platform
• Low-cost Arduino microcontroller mobile platform
• Two differential drive
• Caster ball included
• Complete chassis with mounting hardware
• Dimensions 170mm diameter base
• Weight 400g

Motor Specification
• Gear Ratio 1:120
• No-load speed 3V :100RPM
• No-load speed 6V :200RPM
• No-load current 3V :60mA
• No-load current 6V :71mA
• Stall current 3V :260mA
• Stall current 6V :470mA
• Torgue 3V 1.2Kgcm
• Torque 6V 1.92Kgcm
• Size 55mm x 48.3mm x 23mm
• Weight:45g

Powered By DFRobot 2008-2016

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ROB0005 Datasheet file may be downloaded here without warranties.

Datasheet ID: ROB0005 509028