Breadboard Plugin Components Pack SKU:KIT0098
Part | Datasheet |
---|---|
![]() |
KIT0098 (pdf) |
PDF Datasheet Preview |
---|
Breadboard Plugin Components Pack SKU:KIT0098 Overview Breadboard-Plugin series is a new kit for breadboard experiment. It provides convenient, reliable and reusable components, plugins and modules. This innovative approach will solve the following issues when using a breadboard • The problem by using DIP type of components Hard to read the value Resistor color codes Severe deformations of the pin after used, non-reusable, not environment-friendly The pin diameter is too thin or too thick, poor match with the breadboard hole Confused the order of transistor “e”, “b”, “c” pins • Usage problem Most of sensors and actuators require 3 interfaces Signal/VCC/GND, you have to use the jumper wire for the connection, messy and unreliable. • Easy to recognize Resistance value, capacitance values, positive/negative polaron and pin functions are marked clearly. • Easy to learn The circuit symbol is clearly visible, directly match the circuit diagram • Easy to use Direct-plug pin • Easy to Plug/unplug The 0.64mm diametral pin matches the breadboard hole perfectly • High-reliability ENIG technology, the circuit connection is reliable and durable • Environment-friendly Reusable and Environment-friendly Breadboard-Plugin is designed by Maker LeoYan, produced and sold by DFRobot Specification Resistors Package 1206 resistors Resistance 220R, 1K, 4.7K, 10K Pins 2 Lead Pitch 4x2.54mm 400mil Dimensions without pins w x h mm Capacitors Capacitors Description Package 1206 Capacitance Pins 2 Lead Pitch 4x2.54mm 400mil Dimensions without pins 13.8 W x 11.4 H mm Leds Leds Description Package 1206 PCB integrates current limiting resistance Color Red R , Yellow Y , Green G , Blue B Pins 2 Lead Pitch 4x2.54mm 400mil Dimensions without pins 13.8 W x 14.5 H mm Diodes Diodes Description Type SS14 Schottky Barrier Rectifiers Parameter If=1A, Vfm=0.7V, Vr=40V Pins 2 Lead Pitch 4x2.54mm 400mil Dimensions without pins 13.8 W x 11.5 H mm Transistor-NPN Transistor-NPN Description Type BC817-25 Parameter Vceo=45V, Ic=500mA, hFE=400 Pins 3 Lead Pitch 2x2.54mm 200mil Dimensions without pins 13.8 W x 11.7 H mm Transistor-PNP Transistor-PNP Description Type BC807-25 Parameter Vceo=-45V, Ic=-500mA, hFE=400 Pins 3 Lead Pitch 2x2.54mm 200mil Dimensions without pins 13.8 W x 10.7 H mm Breadboard Plugin Connector Support 4 x 3-Pin modules Dimensions 15.2x16.2mm Breadboard Plugin Connector Instructions Breadboard Plugin Connector • Circuit Schematic • Breadboard The kit supports following kinds of breadboard: • Breadboard 1 it is the default supported breadboard, can use it directly. • Breadboard 2 If using this kind of bread board, resolder Pin at "M" and solder the Pin to “L” or “R”. • Usage tutorial Recognize the front and back Plug the back pins into Breadboard Plug the Module on the breadboard plugin board. Please notice the power polarities For any question/ advice/ cool idea to share with us, please visit DFRobot Forum or Email to Techsupport Team 5-30-17 |
More datasheets: 8412/2 | 8414GL | 8414L | 8414GM | 8412GL | 8412G | 8414 | 8412 | 8412M | 8414M |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived KIT0098 Datasheet file may be downloaded here without warranties.