KIT0021

KIT0021 Datasheet

Waterproof DS18B20 Sensor Kit SKU:KIT0021

Part	Datasheet
KIT0021	KIT0021 (pdf)

PDF Datasheet Preview
Waterproof DS18B20 Sensor Kit SKU:KIT0021 INTRODUCTION If you are familiar with our product, you will find there is waterproof temperature sensor named DS18B20. This waterproof temperature sensor kit is using the same probe AS It contains a probe with a resister module. So it is easy to connect on the Arduino board. The DS18B20 temperature sensor provides 9 to 12-bit configurable temperature readings over a 1-Wire interface, so that only one wire and ground needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems. Check 27 Pcs Sensor Kit for Arduino to get more sensors for arduino. SPECIFICATION • Operating voltage 5.5V • ±0.5°C Accuracy from -10°C to +85°C • Usable temperature range -55 to 125°C -67°F to +257°F • 9 to 12 bit selectable resolution • Uses 1-Wire interface- requires only one digital pin for communication • Unique 64 bit ID burned into chip • Multiple sensors can share one pin • Temperature-limit alarm system • Query time is less than 750ms • 3 wires interface o Type A • Red wire - VCC • Black wire - GND • Yellow wire - DATA o Type B • Red wire - VCC • Yellow wire - GND • Green wire - DATA • Stainless steel tube 6mm diameter by 35mm 1.34" long • Cable diameter 4mm 0.16" • Length 90cm 35.43" SHIPPING LIST • Waterproof DS18B20 Digital temperature sensor DFR0198 x1 • Terminal sensor adapter DFR0055 x1 • Digital sensor cable FIT0011 Powered By DFRobot 2008-2017 5-2-17

PDF Datasheet Preview

Waterproof DS18B20 Sensor Kit SKU:KIT0021

INTRODUCTION

If you are familiar with our product, you will find there is waterproof temperature sensor named DS18B20. This waterproof temperature sensor kit is using the same probe AS It contains a probe with a resister module. So it is easy to connect on the Arduino board. The DS18B20 temperature sensor provides 9 to 12-bit configurable temperature readings over a 1-Wire interface, so that only one wire and ground needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems. Check 27 Pcs Sensor Kit for Arduino to get more sensors for arduino.

SPECIFICATION
• Operating voltage 5.5V
• ±0.5°C Accuracy from -10°C to +85°C
• Usable temperature range -55 to 125°C -67°F to +257°F
• 9 to 12 bit selectable resolution
• Uses 1-Wire interface- requires only one digital pin for communication
• Unique 64 bit ID burned into chip
• Multiple sensors can share one pin
• Temperature-limit alarm system
• Query time is less than 750ms
• 3 wires interface o Type A
• Red wire - VCC
• Black wire - GND
• Yellow wire - DATA o Type B
• Red wire - VCC
• Yellow wire - GND
• Green wire - DATA
• Stainless steel tube 6mm diameter by 35mm 1.34" long
• Cable diameter 4mm 0.16"
• Length 90cm 35.43"

SHIPPING LIST
• Waterproof DS18B20 Digital temperature sensor DFR0198 x1
• Terminal sensor adapter DFR0055 x1
• Digital sensor cable FIT0011

Powered By DFRobot 2008-2017 5-2-17

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived KIT0021 Datasheet file may be downloaded here without warranties.

Datasheet ID: KIT0021 509010