Micro Metal Gear Motor with Connector 50:1 SKU:FIT0468
Part | Datasheet |
---|---|
![]() |
FIT0468 (pdf) |
PDF Datasheet Preview |
---|
Micro Metal Gear Motor with Connector 50:1 SKU:FIT0468 INTRODUCTION This motor has a long mm D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws 1.6mm diameter, 0.35mm thread pitch , or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gear motor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs, such as the 42x19mm wheel. The motor comes with PH2.0 port which is easy to connect and solderless. An integrated circuit enhances its anti-jamming capability. Compatible with 2WD miniQ Robot Chassis. SPECIFICATION • Operating Voltage 1.0~6.0V • Motor Speed 260 • Gear Ratio 50:1 • Rated Current • Stall Current • Stall Torque • Weight 15g DOCUMENTS Motor Dimensions SHIPPING LIST • Micro Metal Gear Motor with connector 50:1 x1 • Double PH-2.0 cable x1 • Single PH-2.0 cable x1 Powered By DFRobot 2008-2017 4-27-17 |
More datasheets: PLTR5-72MM-PR2 | RD20S-4/210327 | RD20S-4/110898 | RD20S-4/204174A | RD20S-4/210660 | FT-170-300-001 | FT-170-300-003 | FT-170-300-002 | AS3636-ZWLT-500 | 131C11119X |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FIT0468 Datasheet file may be downloaded here without warranties.