FIT0314

FIT0314 Datasheet

NFC Tag Round SKU:FIT0314

Part	Datasheet
FIT0314	FIT0314 (pdf)

PDF Datasheet Preview
NFC Tag Round SKU:FIT0314 INTRODUCTION NFC Tag 13.56MHz is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-One NFC tag can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 rewrites.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed. The NXP TagWriter application will be helpful to format NDEF exchange protocol and easy to store the contacts, bookmarks, geo location, Bluetooth Handover, SMS, Mail, text messages and many more to NFC tags and stickers • Contactless payment systems • Bluetooth and Wi-Fi connections • Social networking situations, such as sharing contacts, photos, videos or files • Electronic identity documents and keycards • Smartphone automation and NFC tags SPECIFICATION • Operating Frequency:13.56 MHz • EEPROM storage 1K Byte • Default protocol ISO14443A • 4 Byte unique identifier • Variable Identification distance:0~5cm • Service life:>=10 years • Service time:100,000 re-writes • Material ABS/PVC • Size:3.2x2.8x2.5cm 1.26x1.10x0.98" • Weight About 3g Powered By DFRobot 2008-2017 4-27-17

PDF Datasheet Preview

NFC Tag Round SKU:FIT0314

INTRODUCTION

NFC Tag 13.56MHz is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-One NFC tag can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 rewrites.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

The NXP TagWriter application will be helpful to format NDEF exchange protocol and easy to store the contacts, bookmarks, geo location, Bluetooth Handover, SMS, Mail, text messages and many more to NFC tags and stickers
• Contactless payment systems
• Bluetooth and Wi-Fi connections
• Social networking situations, such as sharing contacts, photos, videos or files
• Electronic identity documents and keycards
• Smartphone automation and NFC tags

SPECIFICATION
• Operating Frequency:13.56 MHz
• EEPROM storage 1K Byte
• Default protocol ISO14443A
• 4 Byte unique identifier
• Variable Identification distance:0~5cm
• Service life:>=10 years
• Service time:100,000 re-writes
• Material ABS/PVC
• Size:3.2x2.8x2.5cm 1.26x1.10x0.98"
• Weight About 3g

Powered By DFRobot 2008-2017 4-27-17

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FIT0314 Datasheet file may be downloaded here without warranties.

Datasheet ID: FIT0314 508917