DFR0289

DFR0289 Datasheet

Relay Controller DFR0289

Part	Datasheet
DFR0289	DFR0289 (pdf)

PDF Datasheet Preview
Relay Controller DFR0289 Contents • 1 Introduction • 2 Specification • 3 Tutorial Requirements Connection Diagram PC Control POE Relay Open the Software Enter control panel Control the POE relay with network Control the POE relay with USB Reset and Restore Factory Settings Result • 4 FAQ Introduction With ethernet relay, IOT has become so easy. RLY-8-POE-USB is a POE&USB controlled 8 channel relay controller based on STM32. With this module users can be able to do remote control/switching power supply centralized management, the purpose of this product can be directly by net POE power supply switch power supply is connected to the Internet, so you just need to a cable link equipment, suitable for home decoration, hotel, shopping mall management, Internet cafes, karaoke time, daily office, stores monitoring, networking, industrial control equipment, test equipment, power control, unattended, underground pipes, mining equipment, ships, machine room, street lamp management, intelligent management and centralized management. RLY-8-POE-USB is an open communication protocol of network relay control products wide area network operation on the router need to add port mapping which can use all kinds of network tools to directly establish TCP connection and control. DFRobot provides you with a set of control tools as a reference. This product supports USB function,Plug the USB directly into the computer.The control and parameter setting can be controlled by using binary communication protocol through USB.Of course, you can also use the other controller directly control the RLY-8 through USB. This product can be achieved through a wide area network or LAN control relay module.So as to realize the remote control electric appliance switch to achieve the purpose of centralized management of power supply. This product can be used in ordinary power adapter as power supply, but also through the POE as power supply switch to direct power and networking.So you can only need to connect a cable connected to the device, you can achieve power supply and network control functions. PoE compatiblity issue: We have passed the test on PoE Switches as ONV POE31004P Tenda TEF1008P However, as reported by our customer, the PoE feature failed on these PoE switches: TP-LINK TL-SG3424P 24-Port Gigabit L2 Managed PoE Switch 100-POE4 Industrial Midspan Power Injector Specification • Operating Voltage DC:7-23V • Relay number 8 • Data Communication TCP, USB-UART • Network Configuration support for DHCP static IP • Power Consumption Max 3.5W • Maximum Control 277VAC-10A/125VAC-12A • Control Mode Based on the IP address, the network sends the TCP data packets / through the USB-UART port to control the on-board relay switch. • Factory Settings IP:192.168.1.10, port number 2000 • Weight 530g • Size 90.10mm * 144.8mm *40mm Tutorial This tutorial will teach you how to configure and use RLY-8-POE Relay Controller. Requirements • Hardware POE Relay x1 PC X1 USB to UART or ethernet cable POE Ethernet switch or ordinary Ethernet switch • Software updata computer software & usb driver Click to Download Connection Diagram We have two ways for the connection, one is through the cable, the other is through the USB, of course, you can use them the same time. NOTE:If you choose directly connect to the computer. Then the computer have to be set to a fixed IP, you can set computer's IP as netmask gateway PC Control POE Relay Open the Software Enter control panel Select the network, and then select the Network Control button, enter the network control interface NOTE It may take some time when the RlY-8 has just started to plug in the electric, please be patient waiting for the emergence of network list Control the POE relay with network NOTE It is recommended to click the Get Status button to get the current state when you want to control the relay. Control the POE relay with USB RLY-8 is using STM32 MCU, please install the driver first! Reset and Restore Factory Settings On the device has a Reset button, Keep holding, when the lights began to flash,Has been bright, said the resumption of factory success. Result There is no question about this product yet, if you have any problem or suggestions, you are welcome to email to us or post on our Forum! Thank you! For any questions/advice/cool ideas to share, please visit the DFRobot Forum or email to Powered By DFRobot 2008-2017

PDF Datasheet Preview

Relay Controller DFR0289

Contents
• 1 Introduction
• 2 Specification
• 3 Tutorial

Requirements Connection Diagram PC Control POE Relay

Open the Software Enter control panel Control the POE relay with network Control the POE relay with USB Reset and Restore Factory Settings Result
• 4 FAQ

Introduction

With ethernet relay, IOT has become so easy. RLY-8-POE-USB is a POE&USB controlled 8 channel relay controller based on STM32. With this module users can be able to do remote control/switching power supply centralized management, the purpose of this product can be directly by net POE power supply switch power supply is connected to the Internet, so you just need to a cable link equipment, suitable for home decoration, hotel, shopping mall management, Internet cafes, karaoke time, daily office, stores monitoring, networking, industrial control equipment, test equipment, power control, unattended, underground pipes, mining equipment, ships, machine room, street lamp management, intelligent management and centralized management.

RLY-8-POE-USB is an open communication protocol of network relay control products wide area network operation on the router need to add port mapping which can use all kinds of network tools to directly establish TCP connection and control. DFRobot provides you with a set of control tools as a reference.

This product supports USB function,Plug the USB directly into the computer.The control and parameter setting can be controlled by using binary communication protocol through USB.Of course, you can also use the other controller directly control the RLY-8 through USB.

This product can be achieved through a wide area network or LAN control relay module.So as to realize the remote control electric appliance switch to achieve the purpose of centralized management of power supply.

This product can be used in ordinary power adapter as power supply, but also through the POE as power supply switch to direct power and networking.So you can only need to connect a cable connected to the device, you can achieve power supply and network control functions.

PoE compatiblity issue:

We have passed the test on PoE Switches as

ONV POE31004P Tenda TEF1008P

However, as reported by our customer, the PoE feature failed on these PoE switches:

TP-LINK TL-SG3424P 24-Port Gigabit L2 Managed PoE Switch 100-POE4 Industrial Midspan Power Injector

Specification
• Operating Voltage DC:7-23V
• Relay number 8
• Data Communication TCP, USB-UART
• Network Configuration support for DHCP static IP
• Power Consumption Max 3.5W
• Maximum Control 277VAC-10A/125VAC-12A
• Control Mode Based on the IP address, the network sends the TCP data packets / through the

USB-UART port to control the on-board relay switch.
• Factory Settings IP:192.168.1.10, port number 2000
• Weight 530g
• Size 90.10mm * 144.8mm *40mm

Tutorial

This tutorial will teach you how to configure and use RLY-8-POE Relay Controller.

Requirements
• Hardware POE Relay x1 PC X1 USB to UART or ethernet cable POE Ethernet switch or ordinary Ethernet switch
• Software updata computer software & usb driver Click to Download

Connection Diagram

We have two ways for the connection, one is through the cable, the other is through the USB, of course, you can use them the same time.

NOTE:If you choose directly connect to the computer. Then the computer have to be set to a fixed IP, you can set computer's IP as netmask gateway

PC Control POE Relay Open the Software

Enter control panel

Select the network, and then select the Network Control button, enter the network control interface

NOTE It may take some time when the RlY-8 has just started to plug in the electric, please be patient waiting for the emergence of network list

Control the POE relay with network

NOTE It is recommended to click the Get Status button to get the current state when you want to control the relay.

Control the POE relay with USB

RLY-8 is using STM32 MCU, please install the driver first!

Reset and Restore Factory Settings

On the device has a Reset button, Keep holding, when the lights began to flash,Has been bright, said the resumption of factory success.

Result

There is no question about this product yet, if you have any problem or suggestions, you are welcome to email to us or post on our Forum! Thank you!

For any questions/advice/cool ideas to share, please visit the DFRobot Forum or email to

Powered By DFRobot 2008-2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0289 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0289 508708