DFR0021-R

DFR0021-R Datasheet


Powered By DFRobot 2008-2017

Part Datasheet
DFR0021-R DFR0021-R DFR0021-R (pdf)
PDF Datasheet Preview
Gravity:Digital RED LED Light Module

INTRODUCTION This red LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too much current from the microcontroller and damaging the I/O. If you wish to make this LED light up with a logic high, you can switch the Signal wire Green with the GND wire Black and the Voltage wire Red to the Signal wire's original spot.

SPECIFICATION
• Type Digital
• LED light module pin definition 1 control terminal 2 power supply 3 ground

SHIPPING LIST
• Sensor x1
• Digital Sensor Cable SKU:FIT0011 x1

Powered By DFRobot 2008-2017
More datasheets: PT12130SL | PT12133J | PT12122SL | BXEN-65E-11L-3A-00-0-0 | BXEN-57E-11L-3A-00-0-0 | BXEN-50E-11L-3A-00-0-0 | BXEN-40E-11L-3A-00-0-0 | BXEN-35E-11L-3A-00-0-0 | BXEN-30E-11L-3A-00-0-0 | BXEN-27E-11L-3A-00-0-0


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0021-R Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0021-R 508594