DFR0017

DFR0017 Datasheet

Relay Module Arduino Compatible SKU DFR0017

Part	Datasheet
DFR0017	DFR0017 (pdf)

PDF Datasheet Preview
Relay Module Arduino Compatible SKU DFR0017 Contents • 1 Introduction • 2 Specification • 3 Tutorial Connection Diagram Sample Code Result Introduction The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. This relay shield uses Omron G5LA high-quality relay. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board not included . The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices. Specification • Type Digital • Single relay board • Rated through-current 10A NO 5A NC • Maximum switching voltage 150VAC 24VDC • Digital interface • Control signal TTL level • Rated load 8A 150VAC NO 10A 24VDC NO , 5A 250VAC NO/NC 5A 24VDC NO/NC • Maximum switching power AC1200VA DC240W NO AC625VA DC120W NC • Contact action time 10ms • Module pin definitions Pin1 - control side, Pin2 - Power supply VCC , Pin3 - ground Tutorial Connection Diagram Sample Code //Arduino Sample Code //Last modified on 14th March 2012 by HJS //This code has been updated to work with the sample code provided in the Wik i int Relay = 3; void setup pinMode 13, OUTPUT ; //Set Pin13 as output digitalWrite 13, HIGH ; //Set Pin13 High pinMode Relay, OUTPUT ; //Set Pin3 as output void loop digitalWrite Relay, HIGH //Turn off relay delay 2000 ; digitalWrite Relay, LOW //Turn on relay delay 2000 ; Result Every two seconds, LED will be turned on and off. Powered By DFRobot 2008-2017

PDF Datasheet Preview

Relay Module Arduino Compatible SKU DFR0017

Contents
• 1 Introduction
• 2 Specification
• 3 Tutorial

Connection Diagram Sample Code Result

Introduction

The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. This relay shield uses Omron G5LA high-quality relay. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board not included . The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.

Specification
• Type Digital
• Single relay board
• Rated through-current 10A NO 5A NC
• Maximum switching voltage 150VAC 24VDC
• Digital interface
• Control signal TTL level
• Rated load 8A 150VAC NO 10A 24VDC NO , 5A 250VAC NO/NC 5A 24VDC NO/NC
• Maximum switching power AC1200VA DC240W NO AC625VA DC120W NC
• Contact action time 10ms
• Module pin definitions Pin1 - control side, Pin2 - Power supply VCC , Pin3 - ground

Tutorial

Connection Diagram

Sample Code
//Arduino Sample Code //Last modified on 14th March 2012 by HJS //This code has been updated to work with the sample code provided in the Wik i
int Relay = 3;
void setup
pinMode 13, OUTPUT ;
//Set Pin13 as output
digitalWrite 13, HIGH ;
//Set Pin13 High
pinMode Relay, OUTPUT ;
//Set Pin3 as output
void loop
digitalWrite Relay, HIGH //Turn off relay
delay 2000 ;
digitalWrite Relay, LOW //Turn on relay
delay 2000 ;

Result

Every two seconds, LED will be turned on and off.

Powered By DFRobot 2008-2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0017 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0017 508589