81211

81211 Datasheet

81200 81201 81202 81203 81204 81205 81206

Part	Datasheet
81211	81211 (pdf)

Related Parts	Information
81205	81205
81212	81212
81209	81209
81206	81206
81204	81204
81203	81203
81202	81202
81201	81201
81210	81210

PDF Datasheet Preview
Antistatic Cellulose Tape For general purpose applications • mil mm total thickness • Cellulose film construction 109 - 1010 ohms • Rubber based adhesive absorbs moisture • Adhesive surface resistivity 109 - 1010 ohms • Temperature Range 10°C - 50°C 50°F - 122°F ; meets MIL-B-81705 of 100°C for 10 min max • Available in clear Antistatic Tape Imprint on Clear Cellulose with Symbols Also availabe in clear with ESD sysmbols. Marking is approved symbols of Mil STD-1285, JEDEC and ESD Association. Symbols printed in between film and adhesive will not rub off. Military organizations sometimes use MIL-STD-1285 for hardware marking and that document once required the use of the "three arrows in a circle" symbol. That symbol has been changed for consistency with industry marking to the "hand in triangle" ESD Susceptibility symbol. Ref TR20.20 section Tape is wound on a paper core. Tape widths are nominal metric mm The user must determine the suitability for use of an antistatic tape for his particular application. 1/4" is 6 mm nominal or 1/2" is 12 mm nominal or 3/4" is 18 mm nominal or 1" is 24 mm nominal or 2" is 48 mm nominal or Wescorp is a Desco Industries brand. Made in America No silicone based material adhesive, film backing, release material is used in the manufacture of our cellulose tape. Tape Antistatic Clear Cellulose Antistatic Clear Cellulose with Symbols Width 81200 81201 81202 81203 81204 81205 81206 Core 1" 3" Length 36 yds 72 yds 81209 81210 81211 81212 3" 72 yds Width tolerance ±1/32" Note For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated flipped over to the other side periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68°F 20°C and be protected from exposure to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat. Tape over one year old should be evaluated by the user to determine acceptability for the user's application. Cartons are marked with date code information such as "2 38 05 - 4 125 03 M". In this example, the number after the hyphen "4" signifies the year 2004 and the following 3 digit number "125" signifies the Tape was manufactured of the 125th day of the year. WESCORP ANTISTATIC CELLULOSE TAPE DESCO WEST 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE PHONE 909 627-8178 FAX 909 627-7449 DESCO EAST 90 HUDSON RD, CANTON, MA 02021-1407 PHONE 781 821-8370 FAX 781 575-0172 DRAWING NUMBER 81200 DATE 03/05 2005 DESCO INDUSTRIES INC. Employee Owned

PDF Datasheet Preview

Antistatic Cellulose Tape

For general purpose applications
• mil mm total thickness
• Cellulose film construction 109 - 1010 ohms
• Rubber based adhesive absorbs moisture
• Adhesive surface resistivity 109 - 1010 ohms
• Temperature Range 10°C - 50°C 50°F - 122°F ;
meets MIL-B-81705 of 100°C for 10 min max
• Available in clear

Antistatic Tape

Imprint on Clear Cellulose with Symbols

Also availabe in clear with ESD sysmbols. Marking is approved symbols of Mil STD-1285*, JEDEC and ESD Association. Symbols printed in between film and adhesive will not rub off.
*Military organizations sometimes use MIL-STD-1285 for hardware marking and that document once required the use of the "three arrows in a circle" symbol. That symbol has been changed for consistency with industry marking to the "hand in triangle" ESD Susceptibility symbol. Ref TR20.20 section

Tape is wound on a paper core.

Tape widths are nominal metric mm

The user must determine the suitability for use of an antistatic tape for his particular application.
1/4" is 6 mm nominal or 1/2" is 12 mm nominal or 3/4" is 18 mm nominal or 1" is 24 mm nominal or 2" is 48 mm nominal or
*Wescorp is a Desco Industries brand.

Made in America

No silicone based material adhesive, film backing, release material is used in the manufacture of our cellulose tape.

Tape Antistatic Clear Cellulose

Antistatic Clear Cellulose with Symbols

Width
81200 81201 81202 81203 81204 81205 81206

Core
1" 3"

Length
36 yds 72 yds
81209 81210 81211 81212 3" 72 yds

Width tolerance ±1/32"

Note For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated flipped over to the other side periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68°F 20°C and be protected from exposure to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat. Tape over one year old should be evaluated by the user to determine acceptability for the user's application. Cartons are marked with date code information such as "2 38 05 - 4 125 03 M". In this example, the number after the hyphen "4" signifies the year 2004 and the following 3 digit number "125" signifies the Tape was manufactured of the 125th day of the year.

WESCORP* ANTISTATIC CELLULOSE TAPE

DESCO WEST 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE PHONE 909 627-8178 FAX 909 627-7449 DESCO EAST 90 HUDSON RD, CANTON, MA 02021-1407 PHONE 781 821-8370 FAX 781 575-0172

DRAWING NUMBER 81200

DATE 03/05
2005 DESCO INDUSTRIES INC. Employee Owned

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 81211 Datasheet file may be downloaded here without warranties.

Datasheet ID: 81211 508560