66115

66115 Datasheet

66115

Part	Datasheet
66115	66115 (pdf)

Related Parts	Information
66090	66090
66065	66065
66060	66060
66035	66035
66030	66030

PDF Datasheet Preview
BLUE, DARK GREY, BEIGE, DARK BLUE Disclaimer All statements, technical data, and recommendations contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness thereof is not guaranteed. The proper and correct applications of products and data is the responsibility of the user. Statements or recommendations not contained herein shall have no force or effect unless embodied in a written agreement signed by authorized offers of Desco Industries, Inc. Tolerances Width +/- Length +/- every 1 linear foot of running material. Description: Type T2 meets the worksurface requirements of ANSI/ESD S20.20 and EIA-625. This material is a dual purpose rubber matting material. The two layer construction allows it to be used as a dissipative or a conductive matting product. The soft dissipative layer makes an excellent table mat, ideal for use in soldering and assembly areas. This rubber material has superior resistance to heat, abrasion, chemicals, and is easy to clean and maintain. Type T2 material will not melt and does not burn when coming into contact with hot metal parts or soldering debris. It is amine, chloride, sulfide, alumina, and magnesia free. Type T2 is suitable for use with continuous monitors. Type T2 is manufactured without any ozone depleting substances, and in accordance with the Montreal Protocol. Electrical Properties: Property RTT Resistance RTG Resistance Charge Decay: Test Method ESD S4.1 ESD S4.1 FTMS 101C, Method 4046 Value 106 - 108 Ohms 106 - 108 Ohms 0.01seconds Electrical Properties obtained by testing to industrial standards by an independent testing laboratory 100 Volts and 50% relative humidity unless otherwise specified. Complete text of the test report is available upon request. Limited Lifetime Warranty Desco warrants for one year that matting products will be free of defects in materials and workmanship and will guarantee dissipative/ conductive mat properties for the life of the mat. Damage to matting caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty. Specifications: Construction: Dual-layer rubber material Thickness: 1.5mm Color:* Blue, Dark Blue, Dark Grey, Beige top , Black bottom Texture:* Slight embossed Weight: lbs./sq. ft. 0.2g/cm2 Hardness: 65 ± 5 Shore “A”, per ASTM-D2240 Heat Resistance Does not melt or burn when coming into contact with hot solder and soldering irons. Chemical Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines *Color and texture may vary between lots and mills Grounding This material must be properly grounded for optimum electrical performance. Ask for Technical Bulleltin TB-2000 for mat grounding instructions. Cleaning Use only ESD mat cleaner such as Reztore Surface & Mat Cleaner to clean and extend mat useful life. Do not use cleaners contaiing silicone as silicone will create an insulative film on the surface. Do not sue solvent based cleaners as solvents will dry out matting and may cause curling. Made in America 2005 DESCO INDUSTRIES INC. Employee Owned MATERIAL, DISSIPATIVE, RUBBER, 2-LAYER, 1.5mm DESCO WEST 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE PHONE 909 627-8178 FAX 909 627-7449 DESCO EAST 90 HUDSON RD, CANTON, MA 02021-1407 PHONE 781 821-8370 FAX 781 575-0172 MATERIAL TYPE T2 DRAWING PM-104 DATE 4/05 KITS Item Number Reference For Type T2 Rubber, Dissipative, 2-Layer

PDF Datasheet Preview

BLUE, DARK GREY, BEIGE, DARK BLUE

Disclaimer All statements, technical data, and recommendations contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness thereof is not guaranteed. The proper and correct applications of products and data is the responsibility of the user. Statements or recommendations not contained herein shall have no force or effect unless embodied in a written agreement signed by authorized offers of Desco Industries, Inc.

Tolerances Width +/- Length +/- every 1 linear foot of running material.

Description:

Type T2 meets the worksurface requirements of ANSI/ESD S20.20 and EIA-625. This material is a dual purpose rubber matting material. The two layer construction allows it to be used as a dissipative or a conductive matting product. The soft dissipative layer makes an excellent table mat, ideal for use in soldering and assembly areas. This rubber material has superior resistance to heat, abrasion, chemicals, and is easy to clean and maintain. Type T2 material will not melt and does not burn when coming into contact with hot metal parts or soldering debris. It is amine, chloride, sulfide, alumina, and magnesia free. Type T2 is suitable for use with continuous monitors.

Type T2 is manufactured without any ozone depleting substances, and in accordance with the Montreal Protocol.

Electrical Properties:

Property RTT Resistance RTG Resistance Charge Decay:

Test Method ESD S4.1 ESD S4.1 FTMS 101C, Method 4046

Value 106 - 108 Ohms 106 - 108 Ohms
0.01seconds

Electrical Properties obtained by testing to industrial standards by an independent testing laboratory 100 Volts and 50% relative humidity unless otherwise specified. Complete text of the test report is available upon request.

Limited Lifetime Warranty Desco warrants for one year that matting products will be free of defects in materials and workmanship and will guarantee dissipative/ conductive mat properties for the life of the mat. Damage to matting caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty.

Specifications:

Construction:

Dual-layer rubber material

Thickness:
1.5mm

Color:*

Blue, Dark Blue, Dark Grey, Beige top , Black bottom

Texture:*

Slight embossed

Weight:
lbs./sq. ft. 0.2g/cm2

Hardness:
65 ± 5 Shore “A”, per ASTM-D2240

Heat Resistance Does not melt or burn when coming into contact with hot solder and soldering irons.

Chemical Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons,
mineral oil, aldehydes, and amines
*Color and texture may vary between lots and mills

Grounding This material must be properly grounded for optimum electrical performance. Ask for Technical Bulleltin TB-2000 for mat grounding instructions.

Cleaning Use only ESD mat cleaner such as Reztore Surface & Mat Cleaner to clean and extend mat useful life. Do not use cleaners contaiing silicone as silicone will create an insulative film on the surface. Do not sue solvent based cleaners as solvents will dry out matting and may cause curling.

Made in America
2005 DESCO INDUSTRIES INC. Employee Owned

MATERIAL, DISSIPATIVE, RUBBER, 2-LAYER, 1.5mm

DESCO WEST 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE PHONE 909 627-8178 FAX 909 627-7449

DESCO EAST 90 HUDSON RD, CANTON, MA 02021-1407 PHONE 781 821-8370 FAX 781 575-0172

MATERIAL TYPE T2 DRAWING PM-104

DATE 4/05

KITS

Item Number Reference For Type T2 Rubber, Dissipative, 2-Layer

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 66115 Datasheet file may be downloaded here without warranties.

Datasheet ID: 66115 508558