Delphi Series L36SA, 2 x 50W Family DC/DC Power Module 18~75V in, 12V/4A out
Part | Datasheet |
---|---|
![]() |
L36SA12004NRFA (pdf) |
Related Parts | Information |
---|---|
![]() |
L36SA3R315NRFA |
PDF Datasheet Preview |
---|
Delphi Series L36SA, 2 x 50W Family DC/DC Power Module 18~75V in, 12V/4A out The Delphi Series L36SA, 2” x 18~75V input, single output, isolated DC/DC converter is the latest offering from a world leader in power systems technology and manufacturing - Delta Electronics, Inc. This L36SA series provides up to 50 watts of power or 15A of output current 3.3V in an industry standard 2” x form factor and pinout. The Delphi L36SA series operates from a wide 18~75V 4:1 input voltages. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performances, as well as extremely high reliability under highly stressful operating conditions. All models are fully protected from abnormal input/output voltage, current, and temperature conditions. The Delphi Series converters meet all safety requirements with basic insulation. An optional heat spreader is available for extended operation. High Efficiency 12V/4A Size 49.6mm x 39.4mm x 8.9mm 1.95”x1.55”x0.35” Industry standard pin out Fixed frequency operation Input UVLO, OTP, Output OCP, OVP, auto recovery Pre-bias start up 2250V isolation and basic insulation No minimum load required 4:1 Input voltage range ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility UL/cUL 60950 US & Canada Recognized, and TUV EN60950 certified. CE mark meets 73/23/EEC and 93/68/EEC directives OPTIONS Positive On/Off logic Sense Heat Spreader Heatsink Telecom/Datacom Wireless Networks Optical Network Equipment Server and Data Storage Industrial/Test Equipment DATASHEET DS_L36SA12004_02142007 TECHNICAL SPECIFICATIONS TA=25°C, airflow rate=300 LFM, Vin=48Vdc, nominal Vout unless otherwise noted. PARAMETER NOTES and CONDITIONS ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous Maximum input voltage Operating Temperature Storage Temperature Input/Output Isolation Voltage INPUT CHARACTERISTICS Operating Input Voltage Input Under-Voltage Lockout Turn-On Voltage Threshold Turn-Off Voltage Threshold Lockout Hysteresis Voltage Maximum Input Current No-Load Input Current Off Converter Input Current Inrush Current I2t Input Reflected-Ripple Current Input Voltage Ripple Rejection OUTPUT CHARACTERISTICS Output Voltage Set Point Output Voltage Regulation Over Load Over Line Over Temperature Total Output Voltage Range Output Voltage Ripple and Noise Peak-to-Peak RMS Operating Output Current Range Output over current protection DYNAMIC CHARACTERISTICS Output Voltage Current Transient Positive Step Change in Output Current Negative Step Change in Output Current Settling Time within 1% Vout nominal Turn-On Transient Start-Up Time, From On/Off Control Start-Up Time, From Input Maximum Output Capacitance EFFICIENCY 100% Load 60% Load ISOLATION CHARACTERISTICS Input to Output Isolation Resistance Isolation Capacitance FEATURE CHARACTERISTICS Switching Frequency ON/OFF Control, Negative Remote On/Off logic Low Module On Logic High Module Off ON/OFF Control, Positive Remote On/Off logic Low Module Off Logic High Module On/OFF Current for both remote on/off logic Leakage Current for both remote on/off logic Output Voltage Trim Range Across Pins 9 & 5, Pout max rated power Output Voltage Remote Sense Range option Output Over-Voltage Protection GENERAL SPECIFICATIONS MTBF Weight Over-Temperature Shutdown Refer to Figure21 for measuring point 100% Load, 18Vin P-P thru 12µH inductor, 5Hz to 20MHz 120 Hz Vin=48V, Io=Io.max, Tc=25°C Io=Io,min to Io,max Vin=18V to 75V Ta=-40°C to 85°C Over sample load, line and temperature 5Hz to 20MHz bandwidth Full Load, 1µF ceramic, 10µF tantalum Full Load, 1µF ceramic, 10µF tantalum 48V, 10µF Tan & 1µF Ceramic load cap, 0.1A/µs 50% Io.max to 75% Io.max 75% Io.max to 50% Io.max Full load 5% overshoot of Vout at startup Von/off at Ion/off=1.0mA Von/off at Ion/off=0.0 µA Von/off at Ion/off=1.0mA Von/off at Ion/off=0.0 µA Ion/off at Von/off=0.0V Logic High, Von/off=15V Vin = 18V ~ 60V Vin = 61V ~ 75V Pout max rated power Over full temp range % of nominal Vout Io=80% of Io, max Ta=25°C Refer to Figure21 for measuring point L36SA12004 Standard Min. Typ. Max. Units 2250 ±10 ±10 ±30 2250 1500 M hours Grams DS_L36SA12004_02142007 ELECTRICAL CHARACTERISTICS CURVES |
More datasheets: 72103R-462 | 72103R-442 | DFR0129 | U2861B-MFPY 71 | CY8CKIT-020 | QT110A-ISG | OPC11MED | CY7C027V-25AI | PT8A2511BPE | PT8A2511BPEX |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived L36SA12004NRFA Datasheet file may be downloaded here without warranties.