Delphi Series Q48SD Quarter Brick Family Full Digital Control DC/DC Power Modules 48V in, 12V/25A out
Part | Datasheet |
---|---|
![]() |
Q48SD12025NRFA (pdf) |
PDF Datasheet Preview |
---|
Delphi Series Q48SD Quarter Brick Family Full Digital Control DC/DC Power Modules 48V in, 12V/25A out The Delphi Series Q48SD, 36~75V input, isolated single output, Quarter Brick, are full digital control DC/DC converters, and are the latest offering from a world leader in power systems technology and manufacturing Delta Electronics, Inc. The Q48SD series provide up to 400 watts of power in an industry standard, DOSA compliant footprint and pin out the typical efficiency is 96% at 48V input, 12V output and 33A load. There is a built-in digital PWM controller in the Q48SD series, which is used to complete the Vo feedback, PWM signal generation, active current sharing, fault protection, and PWBUS communications, and so on. With the digital control, many design and application flexibility, advanced performance, and reliability are obtained and the Q48SD series can be connected in parallel directly for higher power without add external oring-fet. DATASHEET DS_Q48SD12025_05032012 High efficiency Size: OPTIONS Digital PMBus interface Active Current sharing Trim Positive On/Off logic With heatspreader Short pin lengths available Telecom / DataCom Wireless Networks Optical Network Equipment Server and Data Storage Industrial/Test Equipment TECHNICAL SPECIFICATIONS TA=25°C, airflow rate=300 LFM, Vin=48Vdc, nominal Vout unless otherwise noted. PARAMETER NOTES and CONDITIONS ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous Transient 100ms On/off Pin Voltage Other Pin Voltage Operating Ambient Temperature Storage Temperature Input/Output Isolation Voltage INPUT CHARACTERISTICS Operating Input Voltage Input Under-Voltage Lockout Turn-On Voltage Threshold Turn-Off Voltage Threshold Lockout Hysteresis Voltage Maximum Input Current No-Load Input Current Off Converter Input Current Inrush Current I2t Start up Current Input Terminal Ripple Current Input Reflected-Ripple Current Input Voltage Ripple Rejection OUTPUT CHARACTERISTICS Output Voltage Set Point Output Voltage Regulation Over Load Over Line Over Temperature Total Output Voltage Range Output Voltage Ripple and Noise Peak-to-Peak RMS Operating Output Current Range Output DC Current-Limit Inception DYNAMIC CHARACTERISTICS Output Voltage Current Transient Positive Step Change in Output Current Negative Step Change in Output Current Setting Time within 1% Vout nominal Turn-On Transient Start-Up Time, From On/Off Control Start-Up Time, From Input Output Capacitance EFFICIENCY 100% Load 60% Load ISOLATION CHARACTERISTICS Input to Output Isolation Resistance Isolation Capacitance FEATURE CHARACTERISTICS Current sharing accuracy Switching Frequency ON/OFF Control, Negative Remote On/Off logic Low Module On Logic High Module Off ON/OFF Control, Positive Remote On/Off logic Low Module Off Logic High Module On/OFF Current for both remote on/off logic ON/OFF Current for both remote on/off logic Leakage Current for both remote on/off logic Output Voltage Trim Range Output Over-Voltage Protection PMBus Signal Interface Characteristics Logic Input Low VIL Logic Input High VIH Logic Onput Low VOL Logic Onput High VOH PMBus Operating Frequency Range 100ms Trim/Current Sharing, C2, Data, SMBAlert, Clock, Addr1 Addr0 Vin=36V, 100% Load, With 100uF external input capacitor Peak, Vin=36V, 100% Load, With 5000uF Co RMS, With 100uF input cap. P-P thru 12µH inductor, 5Hz to 20MHz 120 Hz Vin=48V, Io=Io.max, Tc=25°C Io=Io,min to Io,max Vin=38.5V to 75V Tc=-40°C to 125°C over sample load, and temperature, from 38~75V Vin over sample load, and temperature, from 36~75V Vin 5Hz to 20MHz bandwidth Full Load, 1µF ceramic, 10µF tantalum Full Load, 1µF ceramic, 10µF tantalum Full input voltage range Output Voltage 10% Low 48V, 10µF Tan & 1µF Ceramic load cap, 0.1A/µs 50% Io.max to 75% Io.max 75% Io.max to 50% Io.max Vin=48V Vin=48V Von/off Von/off Von/off Von/off Ion/off at Von/off=0.0V Ion/off at Von/off=2.4V Logic High, Von/off=15V Vin=48V, Pout max rated power Over full temp range % of nominal Vout C2, Data, SMBAlert, Clock pin C2, Data, SMBAlert, Clock pin C2, Data, SMBAlert, Clock pin IOL=6mA C2, Data, SMBAlert, Clock pin IOH=-6mA Q48SD12025 Standard Min. Typ. Max. Units 2250 ±120 16000 2250 |
More datasheets: ATMEGA164PV-10PU | ATMEGA324PV-10AU | ATMEGA644PV-10AU | ATMEGA324P-20AUR | ATMEGA644P-20MU | ATMEGA324P-20AU | ATMEGA644P-20AU | ATMEGA164PV-10AU | ATMEGA644PV-10PU | ATMEGA324PV-10MU |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived Q48SD12025NRFA Datasheet file may be downloaded here without warranties.