MB90561APMC-G-417E1

MB90561APMC-G-417E1 Datasheet

F2MC-16LX MB90560/565 Series

Part	Datasheet
MB90561APMC-G-417E1	MB90561APMC-G-417E1 (pdf)

Related Parts	Information
MB90562APMC-GS-454E1	MB90562APMC-GS-454E1
MB90561APFM-GS-313-BNDE1	MB90561APFM-GS-313-BNDE1
MB90561APMC-G-345-BNDE1	MB90561APMC-G-345-BNDE1
MB90562APMC-G-344-BNDE1	MB90562APMC-G-344-BNDE1

PDF Datasheet Preview
The following document contains information on Cypress products. FUJITSU MICROELECTRONICS DATA SHEET DS07-13715-5E 16-bit Proprietary Microcontrollers CMOS F2MC-16LX MB90560/565 Series MB90561A/562A/F562B/V560/567/568/F568 • DESCRIPTION The MB90560/565 series is a general-purpose 16-bit microcontroller designed for industrial, OA, and process control applications that require high-speed real-time processing. The device features a multi-function timer able to output a programmable waveform. The microcontroller instruction set is based on the same AT architecture as the F2MC-8L and F2MC-16L families with additional instructions for high-level languages, extended addressing modes, enhanced signed multiplication and division instructions, and a complete range of bit manipulation instructions. The microcontroller has a 32-bit accumulator for processing long word 32-bit data. Note F2MC is the abbreviation of FUJITSU Flexible Microcontroller. • FEATURES • Clock • Internal oscillator circuit and PLL clock multiplication circuit • Oscillation clock speed selectable from either the machine clock, main clock, or PLL clock. The main clock is the oscillation clock divided into 2 MHz to 8 MHz for a 1 MHz to 16 MHz base oscillation The PLL clock is the oscillation clock multiplied by one to four 4 MHz to 16 MHz for a 4 MHz base oscillation • Minimum instruction execution time ns for oscillation = 4 MHz, PLL clock setting = x 4, VCC = V • Maximum CPU memory space 16 MB • 24-bit addressing • Bank addressing Continued The information for microcontroller supports is shown in the following homepage. Be sure to refer to the "Check Sheet" for the latest cautions on development. "Check Sheet" is seen at the following support page "Check Sheet" lists the minimal requirement items to be checked to prevent problems beforehand in system development. Copyright 2001-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved MB90560/565 Series Continued • Instruction set • Bit, byte, word, and long word data types • 23 different addressing modes • Enhanced calculation precision using a 32-bit accumulator • Enhanced signed multiplication and division instructions and RETI instruction • Instruction set designed for high level language C and multi-tasking • Uses a system stack pointer • Symmetric instruction set and barrel shift instructions • Program patch function 2 address pointers • 4-byte instruction queue • Interrupt function • Priority levels are programmable • 32 interrupts • Data transfer function • Extended intelligent I/O service function Up to 16 channels • Low-power consumption modes • Sleep mode CPU operating clock stops. • Timebase timer mode Only oscillation clock and timebase timer continue to operate. • Stop mode Oscillation clock stops. • CPU intermittent operation mode The CPU operates intermittently at the specified interval. • Package • LQFP-64P mm pin pitch • QFP-64P mm pin pitch • SH-DIP-64P-M01 mm pin pitch • Process CMOS technology • PERIPHERAL FUNCTIONS RESOURCES • I/O ports 51 ports max. • Timebase timer 1 channel • Watchdog timer 1 channel • 16-bit reload timer 2 channels • Multi-function timer • 16-bit free-run timer 1 channel • Output compare 6 channels Can output an interrupt request when a match occurs between the count in the 16-bit freerun timer and the value set in the compare register. • Input capture 4 channels On detecting an active edge on the input signal from an external input pin, copies the count value of the 16bit freerun timer to the input capture data register and generates an interrupt request. • 8/16-bit PPG timer 8-bit x 6 channels or 16-bit x 3 channels The period and duty of the output pulse can be set by the program. • Waveform generator 8-bit timer 3 channels • UART 2 channels • Full-duplex, double-buffered 8-bit • Can be set to asynchronous or clock synchronous serial transfer I/O expansion serial operation • DTP/external interrupt circuit 8 channels • External interrupts can activate the extended intelligent I/O service. • Generates interrupts in response to external interrupt inputs. DS07-13715-5E • Delayed interrupt generation module • Generates an interrupt request for task switching. • 8/10-bit A/D converter 8 channels • 8-bit or 10-bit resolution selectable MB90560/565 Series DS07-13715-5E MB90560/565 Series • PRODUCT LINEUP MB90560 Series MB90F562B MB90562A MB90561A MB90V560 Classification Internal flash memory product Internal mask ROM product Evaluation product ROM size 64 Kbytes • ORDERING INFORMATION • MB90560 series MB90561AP MB90562AP MB90F562BP MB90561APF MB90562APF MB90F562BPF MB90561APMC MB90562APMC MB90F562BPMC Package 64-pin plastic SH-DIP-64P-M01 64-pin plastic QFP FPT-64P-M06 64-pin plastic LQFP FPT-64P-M23 • MB90565 series MB90567PF MB90568PF MB90F568PF MB90567PMC MB90568PMC MB90F568PMC Package 64-pin plastic QFP FPT-64P-M06 64-pin plastic LQFP FPT-64P-M23 Remarks DS07-13715-5E MB90560/565 Series • PACKAGE DIMENSIONS 64-pin plastic QFP FPT-64P-M06 Lead pitch Package width x package length Lead shape Sealing method Mounting height Code Reference mm 14 x 20 mm Gullwing Plastic mold mm MAX P-QFP64-14x20-1.00 64-pin plastic QFP FPT-64P-M06 Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder. INDEX Details of "A" part Mounting height 0~8° Stand off C 2003-2008 FUJITSU MICROELECTRONICS LIMITED F64013S-c-5-6 Please confirm the latest Package dimension by following URL. Dimensions in mm inches . Note The values in parentheses are reference values. Continued DS07-13715-5E MB90560/565 Series • ORDERING INFORMATION 85 87 • PACKAGE DIMENSIONS Order informations are changed. MB90561APFM MB90561APMC MB90562APFM MB90562APMC MB90F562BPFM MB90F562BPMC MB90567PFM MB90567PMC MB90568PFM MB90568PMC MB90F568PFM MB90F568PMC The package figure is changed. FPT-64P-M09 FPT-64P-M23 The vertical lines marked in the left side of the page show the changes. DS07-13715-5E MEMO MB90560/565 Series DS07-13715-5E MB90560/565 Series MEMO DS07-13715-5E MEMO MB90560/565 Series DS07-13715-5E MB90560/565 Series FUJITSU MICROELECTRONICS LIMITED 7-1, Nishishinjuku 2-chome, Shinjuku Dai-Ichi Seimei Bldg., Shinjuku-ku, Tokyo 163-0722, JAPAN Tel +81-3-5322-3347 Fax +81-3-5322-3387 For further information please contact: North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel +1-408-737-5600 Fax +1-408-737-5999 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD. 151 Lorong Chuan, #05-08 New Tech Park, Singapore 556741, SINGAPORE Tel +65-6281-0770 Fax +65-6281-0220 Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, F. R. GERMANY Tel +49-6103-690-0 Fax +49-6103-690-122 FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. No.222 Yan An Road E , Rm.3102, Bund Center, Shanghai 200002, P. R. CHINA Tel +86-21-6335-1560 Fax +86-21-6335-1605 Korea FUJITSU MICROELECTRONICS KOREA LTD. 1002 Daechi-Dong, 206 KOSMO TOWER, Kangnam-Gu, Seoul 135-280, KOREA Tel +82-2-3484-7100 Fax +82-2-3484-7111 FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 11 Canton Road, 10/F., World Commerce Centre, Tsimshatsui, Kowloon, HONG KONG Tel +852-2377-0226 Fax +852-2376-3269 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited Business & Media Promotion Dept.

PDF Datasheet Preview

The following document contains information on Cypress products.

FUJITSU MICROELECTRONICS DATA SHEET

DS07-13715-5E
16-bit Proprietary Microcontrollers

CMOS

F2MC-16LX MB90560/565 Series

MB90561A/562A/F562B/V560/567/568/F568
• DESCRIPTION

The MB90560/565 series is a general-purpose 16-bit microcontroller designed for industrial, OA, and process control applications that require high-speed real-time processing. The device features a multi-function timer able to output a programmable waveform. The microcontroller instruction set is based on the same AT architecture as the F2MC-8L and F2MC-16L families with additional instructions for high-level languages, extended addressing modes, enhanced signed multiplication and division instructions, and a complete range of bit manipulation instructions. The microcontroller has a 32-bit accumulator for processing long word 32-bit data.

Note F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
• FEATURES
• Clock
• Internal oscillator circuit and PLL clock multiplication circuit
• Oscillation clock speed selectable from either the machine clock, main clock, or PLL clock. The main clock is the oscillation clock divided into 2 MHz to 8 MHz for a 1 MHz to 16 MHz base oscillation The PLL clock is the oscillation clock multiplied by one to four 4 MHz to 16 MHz for a 4 MHz base oscillation
• Minimum instruction execution time ns for oscillation = 4 MHz, PLL clock setting = x 4, VCC = V
• Maximum CPU memory space 16 MB
• 24-bit addressing
• Bank addressing Continued

The information for microcontroller supports is shown in the following homepage. Be sure to refer to the "Check Sheet" for the latest cautions on development.
"Check Sheet" is seen at the following support page
"Check Sheet" lists the minimal requirement items to be checked to prevent problems beforehand in system development.

Copyright 2001-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved

MB90560/565 Series

Continued
• Instruction set
• Bit, byte, word, and long word data types
• 23 different addressing modes
• Enhanced calculation precision using a 32-bit accumulator
• Enhanced signed multiplication and division instructions and RETI instruction
• Instruction set designed for high level language C and multi-tasking
• Uses a system stack pointer
• Symmetric instruction set and barrel shift instructions
• Program patch function 2 address pointers
• 4-byte instruction queue
• Interrupt function
• Priority levels are programmable
• 32 interrupts
• Data transfer function
• Extended intelligent I/O service function Up to 16 channels
• Low-power consumption modes
• Sleep mode CPU operating clock stops.
• Timebase timer mode Only oscillation clock and timebase timer continue to operate.
• Stop mode Oscillation clock stops.
• CPU intermittent operation mode The CPU operates intermittently at the specified interval.
• Package
• LQFP-64P mm pin pitch
• QFP-64P mm pin pitch
• SH-DIP-64P-M01 mm pin pitch
• Process CMOS technology
• PERIPHERAL FUNCTIONS RESOURCES
• I/O ports 51 ports max.
• Timebase timer 1 channel
• Watchdog timer 1 channel
• 16-bit reload timer 2 channels
• Multi-function timer
• 16-bit free-run timer 1 channel
• Output compare 6 channels

Can output an interrupt request when a match occurs between the count in the 16-bit freerun timer and the value set in the compare register.
• Input capture 4 channels On detecting an active edge on the input signal from an external input pin, copies the count value of the 16bit freerun timer to the input capture data register and generates an interrupt request.
• 8/16-bit PPG timer 8-bit x 6 channels or 16-bit x 3 channels The period and duty of the output pulse can be set by the program.
• Waveform generator 8-bit timer 3 channels
• UART 2 channels
• Full-duplex, double-buffered 8-bit
• Can be set to asynchronous or clock synchronous serial transfer I/O expansion serial operation
• DTP/external interrupt circuit 8 channels
• External interrupts can activate the extended intelligent I/O service.
• Generates interrupts in response to external interrupt inputs.

DS07-13715-5E
• Delayed interrupt generation module
• Generates an interrupt request for task switching.
• 8/10-bit A/D converter 8 channels
• 8-bit or 10-bit resolution selectable

MB90560/565 Series

DS07-13715-5E

MB90560/565 Series
• PRODUCT LINEUP

MB90560 Series

MB90F562B

MB90562A

MB90561A

MB90V560

Classification

Internal flash memory product

Internal mask ROM product

Evaluation product

ROM size
64 Kbytes
• ORDERING INFORMATION
• MB90560 series

MB90561AP MB90562AP MB90F562BP

MB90561APF MB90562APF MB90F562BPF

MB90561APMC MB90562APMC MB90F562BPMC

Package
64-pin plastic SH-DIP-64P-M01
64-pin plastic QFP FPT-64P-M06
64-pin plastic LQFP FPT-64P-M23
• MB90565 series

MB90567PF MB90568PF MB90F568PF

MB90567PMC MB90568PMC MB90F568PMC

Package
64-pin plastic QFP FPT-64P-M06
64-pin plastic LQFP FPT-64P-M23

Remarks

DS07-13715-5E

MB90560/565 Series
• PACKAGE DIMENSIONS
64-pin plastic QFP

FPT-64P-M06

Lead pitch Package width x package length

Lead shape

Sealing method

Mounting height Code

Reference
mm 14 x 20 mm

Gullwing Plastic mold mm MAX P-QFP64-14x20-1.00
64-pin plastic QFP FPT-64P-M06

Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder.

INDEX

Details of "A" part

Mounting height
0~8°

Stand off

C 2003-2008 FUJITSU MICROELECTRONICS LIMITED F64013S-c-5-6

Please confirm the latest Package dimension by following URL.

Dimensions in mm inches . Note The values in parentheses are reference values.

Continued

DS07-13715-5E

MB90560/565 Series
• ORDERING INFORMATION 85 87
• PACKAGE DIMENSIONS

Order informations are changed. MB90561APFM MB90561APMC MB90562APFM MB90562APMC MB90F562BPFM MB90F562BPMC MB90567PFM MB90567PMC MB90568PFM MB90568PMC MB90F568PFM MB90F568PMC

The package figure is changed. FPT-64P-M09 FPT-64P-M23

The vertical lines marked in the left side of the page show the changes.

DS07-13715-5E

MEMO

MB90560/565 Series

DS07-13715-5E

MB90560/565 Series

MEMO

DS07-13715-5E

MEMO

MB90560/565 Series

DS07-13715-5E

MB90560/565 Series

FUJITSU MICROELECTRONICS LIMITED
7-1, Nishishinjuku 2-chome, Shinjuku Dai-Ichi Seimei Bldg., Shinjuku-ku, Tokyo 163-0722, JAPAN Tel +81-3-5322-3347 Fax +81-3-5322-3387

For further information please contact:

North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel +1-408-737-5600 Fax +1-408-737-5999

Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD. 151 Lorong Chuan, #05-08 New Tech Park, Singapore 556741, SINGAPORE Tel +65-6281-0770 Fax +65-6281-0220

Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, F. R. GERMANY Tel +49-6103-690-0 Fax +49-6103-690-122

FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. No.222 Yan An Road E , Rm.3102, Bund Center, Shanghai 200002, P. R. CHINA Tel +86-21-6335-1560 Fax +86-21-6335-1605

Korea FUJITSU MICROELECTRONICS KOREA LTD. 1002 Daechi-Dong, 206 KOSMO TOWER, Kangnam-Gu, Seoul 135-280, KOREA Tel +82-2-3484-7100 Fax +82-2-3484-7111

FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 11 Canton Road, 10/F., World Commerce Centre, Tsimshatsui, Kowloon, HONG KONG Tel +852-2377-0226 Fax +852-2376-3269

All Rights Reserved.
The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Business & Media Promotion Dept.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB90561APMC-G-417E1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB90561APMC-G-417E1 508296