MB88146APFV-GE1

MB88146APFV-GE1 Datasheet

MB88146A

Part	Datasheet
MB88146APFV-GE1	MB88146APFV-GE1 (pdf)

PDF Datasheet Preview
The following document contains information on Cypress products. FUJITSU MICROELECTRONICS DATA SHEET DS04-13513-1Ea Linear IC Converter CMOS D/A Converter for Digital Tuning 12-channel, 8-bit, on-chip OP amp., low-voltage MB88146A • DESCRIPTION The MB88146A is an 8-bit D/A converter with twelve built-in channels. The 12 analog outputs each have a builtin OP amplifier with large current drive-capability. The data input/output format is CS chip select with serial bus connection available. A built-in 12-bit I/O expander enables serial parallel conversion 8 of the 12 bits can also be used for analog output . This product can be used for microcontroller port expansion, electronic level adjustment, replacement of semifixed resistance for tuning, etc. • FEATURES • Ultra low power consumption mW/chl typical • Ultra compact package • Built-in 12-channel R-2R type 8-bit D/A converter • Built-in 12-bit I/O expander 8 bits also function as analog output • Built-in analog output amplifier sink current mA maximum, source current mA maximum • Built-in power-on detection circuit initialized at detection of VccD power-on • MCU interface compatible with 3 V to 5 V systems • Power divided into MCU interface power supply VccD and OP amplifier power supply VccA , D/A converter power supply VccD • Analog output capability from 0 V to VccA • Serial data I/O operates to maximum of MHz in cascade connection, up to MHz when VccD = 5 V, up to MHz when VccD = 3 V • CMOS process • Choice of two packages SDIP-24 pin and SSOP-24 pin. Copyright 1998-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved MB88146A • PACKAGES 24-pin Plastic DIP 24-pin Plastic SSOP DIP-24P-M02 • PIN ASSIGNMENT FPT-24P-M03 TOP VIEW D11/AO5 D10/AO6 D9/AO7 D8/AO8 D7/AO9 D6/AO10 D5/AO11 D4/AO12 VCCA VCCD DIP-24, SSOP-24 MB88146A • PIN DESCRIPTION Pin no. 1 to 4 5 to 12 13 14 15 to 18 19 20 21 22 23 24 Pin name AO1 to AO4 D11/AO5 to • ORDERING INFORMATION Part number MB88146AP MB88146APFV Package 24-pin Plastic DIP-24P-M02 24-pin Plastic SSOP FPT-24P-M03 Remarks • PACKAGE DIMENSIONS 24-pin Plastic DIP-24P-M02 MB88146A INDEX-1 INDEX-2 C 1994 FUJITSU LIMITED D24015S-2C-3 24-pin Plastic SSOP FPT-24P-M03 0.51 .020 MIN 15°MAX Dimensions in mm inches * These dimensions do not include resin protrusion. Mounting height INDEX 7.15 .281 REF C 1994 FUJITSU LIMITED F24018S-2C-2 Details of "A" part STAND OFF 0 10° Dimensions in mm inches 19 FUJITSU MICROELECTRONICS LIMITED Shinjuku Dai-Ichi Seimei Bldg. 7-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo 163-0722, Japan Tel +81-3-5322-3347 Fax +81-3-5322-3387 For further information please contact: North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel +1-408-737-5600 Fax +1-408-737-5999 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD. 151 Lorong Chuan, #05-08 New Tech Park, Singapore 556741 Tel +65-6281-0770 Fax +65-6281-0220 Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, Germany Tel +49-6103-690-0 Fax +49-6103-690-122 Korea FUJITSU MICROELECTRONICS KOREA LTD. 206 KOSMO TOWER, 1002 Daechi-Dong, Kangnam-Gu,Seoul 135-280 Korea Tel +82-2-3484-7100 Fax +82-2-3484-7111 FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. Rm.3102, Bund Center, No.222 Yan An Road E , Shanghai 200002, China Tel +86-21-6335-1560 Fax +86-21-6335-1605 FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 10/F., World Commerce Centre, 11 Canton Road Tsimshatsui, Kowloon Hong Kong Tel +852-2377-0226 Fax +852-2376-3269 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited Strategic Business Development Dept.

PDF Datasheet Preview

The following document contains information on Cypress products.

FUJITSU MICROELECTRONICS DATA SHEET

DS04-13513-1Ea

Linear IC Converter

CMOS

D/A Converter for Digital Tuning
12-channel, 8-bit, on-chip OP amp., low-voltage

MB88146A
• DESCRIPTION

The MB88146A is an 8-bit D/A converter with twelve built-in channels. The 12 analog outputs each have a builtin OP amplifier with large current drive-capability. The data input/output format is CS chip select with serial bus connection available. A built-in 12-bit I/O expander enables serial parallel conversion 8 of the 12 bits can also be used for analog output . This product can be used for microcontroller port expansion, electronic level adjustment, replacement of semifixed resistance for tuning, etc.
• FEATURES
• Ultra low power consumption mW/chl typical
• Ultra compact package
• Built-in 12-channel R-2R type 8-bit D/A converter
• Built-in 12-bit I/O expander 8 bits also function as analog output
• Built-in analog output amplifier sink current mA maximum, source current mA maximum
• Built-in power-on detection circuit initialized at detection of VccD power-on
• MCU interface compatible with 3 V to 5 V systems
• Power divided into MCU interface power supply VccD and OP amplifier power supply VccA , D/A converter
power supply VccD
• Analog output capability from 0 V to VccA
• Serial data I/O operates to maximum of MHz in cascade connection, up to MHz when VccD = 5 V, up
to MHz when VccD = 3 V
• CMOS process
• Choice of two packages SDIP-24 pin and SSOP-24 pin.

Copyright 1998-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved

MB88146A
• PACKAGES
24-pin Plastic DIP
24-pin Plastic SSOP

DIP-24P-M02
• PIN ASSIGNMENT

FPT-24P-M03

TOP VIEW

D11/AO5

D10/AO6

D9/AO7

D8/AO8

D7/AO9

D6/AO10

D5/AO11

D4/AO12

VCCA

VCCD

DIP-24, SSOP-24

MB88146A
• PIN DESCRIPTION

Pin no. 1 to 4 5 to 12
13 14 15 to 18
19 20 21
22 23 24

Pin name AO1 to AO4 D11/AO5 to
• ORDERING INFORMATION

Part number MB88146AP MB88146APFV

Package
24-pin Plastic DIP-24P-M02
24-pin Plastic SSOP FPT-24P-M03

Remarks
• PACKAGE DIMENSIONS
24-pin Plastic DIP-24P-M02

MB88146A

INDEX-1 INDEX-2

C 1994 FUJITSU LIMITED D24015S-2C-3
24-pin Plastic SSOP FPT-24P-M03
0.51 .020 MIN
15°MAX

Dimensions in mm inches
* These dimensions do not include resin protrusion.

Mounting height

INDEX
7.15 .281 REF

C 1994 FUJITSU LIMITED F24018S-2C-2

Details of "A" part

STAND OFF
0 10°

Dimensions in mm inches 19

FUJITSU MICROELECTRONICS LIMITED

Shinjuku Dai-Ichi Seimei Bldg. 7-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo 163-0722, Japan Tel +81-3-5322-3347 Fax +81-3-5322-3387

For further information please contact:

North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel +1-408-737-5600 Fax +1-408-737-5999

Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD. 151 Lorong Chuan, #05-08 New Tech Park, Singapore 556741 Tel +65-6281-0770 Fax +65-6281-0220

Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, Germany Tel +49-6103-690-0 Fax +49-6103-690-122

Korea FUJITSU MICROELECTRONICS KOREA LTD. 206 KOSMO TOWER, 1002 Daechi-Dong, Kangnam-Gu,Seoul 135-280 Korea Tel +82-2-3484-7100 Fax +82-2-3484-7111

FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. Rm.3102, Bund Center, No.222 Yan An Road E , Shanghai 200002, China Tel +86-21-6335-1560 Fax +86-21-6335-1605

FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 10/F., World Commerce Centre, 11 Canton Road Tsimshatsui, Kowloon Hong Kong Tel +852-2377-0226 Fax +852-2376-3269

All Rights Reserved.
The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Strategic Business Development Dept.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB88146APFV-GE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB88146APFV-GE1 508292