MB39C831-EVB-02

MB39C831-EVB-02 Datasheet

MB39C831-EVB-02 Thermal Energy Harvesting Evaluation Board Operation Guide

Part	Datasheet
MB39C831-EVB-02	MB39C831-EVB-02 (pdf)

PDF Datasheet Preview
MB39C831-EVB-02 Thermal Energy Harvesting Evaluation Board Operation Guide Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Copyrights Copyrights Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Trademarks All other trademarks or registered trademarks referenced herein are property of the respective corporations. Source Code Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives. Cautions Caution of the products described in this document The following precautions apply to the product described in this manual. Indicates a potentially hazardous situation which could result in death or serious injury and/or a WARNING fault in the user’s system if the product is not used correctly. Electric shock, Damage Electric shock, Damage Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault. CAUTION Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or devices connected to it, or may cause to lose software resources and other properties such as data, if the device is not used appropriately. Cuts, Damage Cuts Damage Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Handle the product with due care not to get injured with such pointed parts. Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault. To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the connectors. Before handling the product, touch a metal object such as a door knob to discharge any static electricity from your body. Cautions Damage When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Always turn the power off before connecting or disconnecting any cables from the product. When unplugging a cable, unplug the cable by holding the connector part without pulling on the cable itself. Pulling the cable itself or bending it may expose or disconnect the cable core, resulting in a fault. Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product. Contents Evaluation Board Specification Block PIN Descriptions Evaluation Board Specification The MB39C831-EVB-02 is the evaluation board for the energy harvesting IC, MB39C831. This evaluation board is capable of accepting solar or thermal electric power source. Table Evaluation Board Specification Parameter Input voltage Input current Output voltage Symbol VDD VOUT Output current VOUT Condition See Table4-3 VDD=0.6V, VOUT=3.3V VDD=3.0V, VOUT=3.3V VDD=3.1V, VOUT=3.3V VDD=3.4V, VOUT=3.6V VDD=3.9V, VOUT=4.1V Min 8 80 Typ - Max 5 1 5 - Unit V mA V mA 240 1 mA *1 This parameter is not be specified. This should be used as a reference to support designing the circuits. Please see the MB39C831 datasheet DS405-00014 for more information. Board size 80mm x 80mm, Layer 4-layer board Block Diagram Figure Block Diagram JP2 CN3 CN4 CN7 LX L1 Start Up MPPT_ENA JP10 R9 1M JP9 R8 1M Control Boost DCDC Converter LOGIC JP8 R7 1M VST VCC VOUT VOUT_S 47nF C2 R4 JP4 C1 CN1 C3 CN5 VOUT JP7 R6 1M JP6 R5 1M DET0 DET1 MPPT Control MPPT_OUT CSH2 CSH1 CSH0 MPPT_IN C10 R2 R1 C8 C7 C6 C5 C4 Ordering Information Table Ordering Information MB39C831-EVB-02 Note Document Title MB39C831-EVB-02 Thermal Energy Harvesting Evaluation Board Operation Guide Document Number 002-08635 02/13/2015 02/05/2016 Origin of Change Description of Change EIFU Section 5 “Setup and verification and Charge mode MPPT mode ” Table 5-4 MPPT Settings of Charge Mode Corrected the contents of the MPPT Values EIFU Section 8 “Component List” Table 8-1 Component List Added the vender’s official names Migrated Spansion Guide from MB39C831-EVB-02_SS901-00018-3v0-E to Cypress format

PDF Datasheet Preview

MB39C831-EVB-02 Thermal Energy Harvesting Evaluation Board Operation Guide

Cypress Semiconductor 198 Champion Court

San Jose, CA 95134-1709

Copyrights

Copyrights

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Trademarks

All other trademarks or registered trademarks referenced herein are property of the respective corporations.

Source Code

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer

CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives.

Cautions

Caution of the products described in this document The following precautions apply to the product described in this manual.

Indicates a potentially hazardous situation which could result in death or serious injury and/or a WARNING fault in the user’s system if the product is not used correctly.

Electric shock, Damage

Electric shock, Damage

Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault.

Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault.

CAUTION

Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or devices connected to it, or may cause to lose software resources and other properties such as data, if the device is not used appropriately.

Cuts, Damage Cuts

Damage

Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault.

The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Handle the product with due care not to get injured with such pointed parts.

Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock.

Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault.

Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault.

To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the connectors. Before handling the product, touch a metal object such as a door knob to discharge any static electricity from your body.

Cautions

Damage

When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault.

Always turn the power off before connecting or disconnecting any cables from the product. When unplugging a cable, unplug the cable by holding the connector part without pulling on the cable itself. Pulling the cable itself or bending it may expose or disconnect the cable core, resulting in a fault.

Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product.

Contents

Evaluation Board Specification Block PIN Descriptions
Evaluation Board Specification

The MB39C831-EVB-02 is the evaluation board for the energy harvesting IC, MB39C831. This evaluation board is capable of accepting solar or thermal electric power source.

Table Evaluation Board Specification

Parameter Input voltage Input current Output voltage

Symbol VDD VOUT

Output current VOUT

Condition See Table4-3 VDD=0.6V, VOUT=3.3V VDD=3.0V, VOUT=3.3V VDD=3.1V, VOUT=3.3V VDD=3.4V, VOUT=3.6V VDD=3.9V, VOUT=4.1V

Min 8 80

Typ -

Max 5 *1 5 -

Unit V mA V mA
240 *1 mA
*1 This parameter is not be specified. This should be used as a reference to support designing the circuits. Please see the MB39C831 datasheet DS405-00014 for more information.

Board size 80mm x 80mm, Layer 4-layer board

Block Diagram

Figure Block Diagram

JP2 CN3 CN4 CN7

LX L1

Start Up

MPPT_ENA

JP10 R9 1M

JP9 R8 1M

Control

Boost DCDC Converter

LOGIC

JP8 R7 1M

VST VCC VOUT VOUT_S
47nF C2

R4 JP4

C1 CN1

C3 CN5

VOUT

JP7 R6 1M

JP6 R5 1M

DET0 DET1

MPPT Control

MPPT_OUT

CSH2

CSH1 CSH0 MPPT_IN

C10 R2 R1

C8 C7 C6 C5 C4
Ordering Information
Table Ordering Information

MB39C831-EVB-02

Note

Document Title MB39C831-EVB-02 Thermal Energy Harvesting Evaluation Board Operation Guide Document Number 002-08635
02/13/2015
02/05/2016

Origin of Change

Description of Change

EIFU

Section 5 “Setup and verification and Charge mode MPPT mode ” Table 5-4 MPPT Settings of Charge Mode Corrected the contents of the MPPT Values

EIFU

Section 8 “Component List” Table 8-1 Component List Added the vender’s official names

Migrated Spansion Guide from MB39C831-EVB-02_SS901-00018-3v0-E to Cypress format

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB39C831-EVB-02 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB39C831-EVB-02 508289