MB39A134PFT-G-BNDE1

MB39A134PFT-G-BNDE1 Datasheet

MB39A134

Part	Datasheet
MB39A134PFT-G-BNDE1	MB39A134PFT-G-BNDE1 (pdf)

Related Parts	Information
MB39A134PFT-G-JN-EFE1	MB39A134PFT-G-JN-EFE1
MB39A134PFT-G-JNE1	MB39A134PFT-G-JNE1

PDF Datasheet Preview
MB39A134 DC/DC Converter IC for Charging Li-ion Battery The MB39A134 is a DC/DC converter IC for charging Li-ion battery, which is suitable for down conversion, and uses pulse width modulation PWM for controlling the charge voltage and current independently. MB39A134 has a AC adapter detection comparator independent of the DC/DC converter controller, and can control the source of power supply to a system. It supports a wide input voltage range, enables low current consumption in standby mode, and can control the charge voltage and charge current with high precision, which is perfect for the built-in Li-ion battery charger used in devices such as notebook PC. • Support 2, 3 and 4 Cell Battery Pack • Built-in two constant current control loops • Built-in AC adapter detection function ACOK pin • Charge voltage accuracy Ta C to • Built-in charging voltage control without external setting resistor V/Cell or V/Cell Adjustable to charge voltage with external resistor • Built-in two high accurate current detection amplifiers 1% At input voltage difference 100 mV 5% At input voltage difference 20 mV Input offset voltage 0 mV Current Amp1 +3 mV Current Amp2 • Built-in Charging Current Control without external resistor RS 20 A Adjustable charging current with external resistor • Setting of switching frequency using an external resistor Frequency setting capacitor integrated 100 kHz to 2 MHz • Built-in under voltage lockout protection • In standby mode ICC 6 µA Typ , only AC adapter detection function is operated • Built-in VH regulator for reducing Qg loss of P-ch MOS FET • Package TSSOP-24 • Built-in charger for Notebook PC • Handy terminal device etc. • San Jose, CA 95134-1709 • 408-943-2600 MB39A134 Contents Description 1 Features 1 Applications 1 Pin Assignment 3 Pin Descriptions 4 Block Diagram 5 Absolute Maximum Ratings 6 Recommended Operating Conditions 7 Electrical Characteristics 8 Typical Characteristics 12 Functional Description 14 DC/DC Converter Block 14 Protection Functions 16 Transit Response When A Load Changes Suddenly 21 Connection Without Using The Current Amp1, Current Amp2 And The Error Amp1, Error Amp2 22 Input/Output Pin Equivalent Circuit Diagram 23 Typical Application Circuit 26 Application Note 30 Reference Data 39 Usage Precaution 41 Ordering Information 41 RoHS Compliance Information 41 Package Dimension 42 Document History 43 Sales, Solutions, and Legal Information 44 Page 2 of 44 Pin Assignment TOP VIEW −INC1 OUTC1 ADJ1 COMP1 ACOK VREF ACIN COMP2 ADJ2 OUTC2 CELLS BATT +INC1 ADJ3 COMP3 +INC2 STF024 MB39A134 Page 3 of 44 MB39A134 Pin Descriptions Pin No. Pin Name I/O -INC1 I Current detection amplifier Current Amp1 inverted input pin. OUTC1 O Current detection amplifier Current Amp1 output pin. ADJ1 I Error amplifier Error Amp1 non-inverted input pin. COMP1 O Error amplifier Error Amp1 output pin. ACOK O AC adapter voltage detection block AC Comp. output pin. ACIN H ACOK L, ACIN L ACOK Hi-Z VREF O Reference voltage output pin. ACIN I AC adapter voltage detection block AC Comp. input pin. Ordering Information MB39A134PFT Package 24-pin plastic TSSOP STF024 Remarks RoHS Compliance Information The LSI products of Cypress with “E1” are compliant with RoHS Directive, and has observed the standard of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls PBB , and polybrominated diphenyl ethers PBDE . A products whose part number has trailing characters “E1” is RoHS compliant. Page 41 of 44 Package Dimension Package Code STF024 INDEX AREA TOP VIEW C A-B D MB39A134 BOTTOM VIEW DETAIL A SEATING PLANE C A-B D 8 SIDE VIEW L2 GAUGE A PLANE DETAIL A SECTION A-A' DIMENSIONS SYMBOL MIN. NOM. MAX. 1 27 6 / / ' , 0 1 6 , 2 1 6 5 , 1 0 , / / , 0 7 5 ' , 0 1 6 , 2 1 , 1 * 1 ' 7 2 / 5 1 & , 1 * 3 5 6 0 < 0 ' , 0 1 6 , 2 1 , 1 * ' , 1 & / 8 ' 0 2 / ' / 6 + ' , 0 1 6 , 2 1 , 1 * ' 2 6 1 2 7 , 1 & / 8 ' , 1 7 5 / ' / 6 + 2 5 3 5 2 7 5 8 6 , 2 1 , 1 7 5 / ' / 6 + 2 5 3 5 2 7 5 8 6 , 2 1 6 + / / 1 2 7 & ' P 3 5 6 , ' ' D Q G ' , 0 1 6 , 2 1 5 ' 7 5 0 , 1 ' ' 7 8 0 + 7 + 3 & * 7 2 3 0 < % 6 0 / / 5 7 + 1 7 + 3 & * % 2 7 2 0 ' , 0 1 6 , 2 1 , 1 * D Q 5 ' 7 5 0 , 1 7 + 2 8 7 5 0 2 6 7 5 0 2 7 + 3 / 6 7 , % 2 ' & / 8 6 , 9 2 0 2 / / 6 + 7 + % 5 % 8 5 6 * 7 % 8 5 6 1 ' , 1 7 5 / ' / 6 + % 8 7 , 1 & / 8 ' , 1 * 1 0 , 6 0 7 & % 7 + 7 2 1 % 2 7 2 0 2 7 + 3 / 6 7 , % 2 ' < ' 7 8 0 6 % 7 2 % ' 7 5 0 , 1 ' 7 ' 7 8 0 + 1 , 6 7 + 0 , 0 8 0 1 8 0 % 5 2 7 5 0 , 1 / 3 2 6 , 7 , 2 1 6 2 5 7 + 6 3 & , , ' 3 & * / 1 * 7 + 7 + ' , 0 1 6 , 2 1 3 / < 7 2 7 + / 7 6 & 7 , 2 1 2 7 + / ' % 7 1 P 7 2 P 5 2 0 7 + / 7 , 3 ' , 0 1 6 , 2 1 E ' 2 6 1 2 7 , 1 & / 8 ' 7 + ' 0 % 5 3 5 2 7 5 8 6 , 2 1 / / 2 % / ' 0 % 5 3 5 2 7 5 8 6 , 2 1 6 + / / % P 7 2 7 / , 1 & 6 2 7 + E ' , 0 1 6 , 2 1 0 , 0 8 0 7 5 , & 2 1 ' , 7 , 2 1 7 + ' 0 % 0 1 2 % / 2 & 7 2 7 + / 2 5 ' , 8 2 7 + 2 7 7 + , 6 & + 0 5 7 8 5 , 6 2 3 7 , 2 1 / / , 7 , 6 1 2 7 3 5 6 1 7 + 1 3 , 1 , ' 1 7 , , 0 8 6 % / 2 & 7 , 7 + , 7 + , 1 ' 5 , 1 ' , & 7 ' , 6 ' , 1 ' 6 7 + 9 5 7 , & / ' , 6 7 1 & 5 2 0 7 + 6 7 , 1 * 3 / 1 7 2 7 + / 2 6 3 2 , 1 2 7 + 3 & * % 2 ' & / 8 ' , 1 * 7 + / , 1 2 5 7 + 5 0 1 + 1 & 0 1 2 & 9 , 7 ' 2 3 & * & 2 1 , * 8 5 7 , 2 1 6 JEDEC SPECIFICATION NO. REF N/A Page 42 of 44 MB39A134 Document History Updated Ordering Information: Change the package name from FPT-24P-M08 to STF024 5626720 HIXT 02/13/2017 Deleted the words, “Lead Free version”, in the Remarks. Deleted “Ev Board Ordering Information” Deleted “Marking Format Lead Free Version ” Deleted “Labeling Sample Lead Free Version ” Deleted “MB39A134PFT Recommended Conditions Of Moisture Sensitivity Level” Updated Package Dimension Updated to Cypress format 5703758 AESATMP8 04/20/2017 Updated logo and Copyright. Page 43 of 44 MB39A134 Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. Products Microcontrollers cypress.com/arm Solutions PSoC 1 \| PSoC 3 \| PSoC 4 \| PSoC 5LP \| PSoC 6 Automotive Clocks & Buffers Interface Internet of Things Memory Microcontrollers cypress.com/automotive cypress.com/clocks cypress.com/interface cypress.com/iot cypress.com/memory cypress.com/mcu Cypress Developer Community Forums \| WICED IOT Forums \| Projects \| Video \| Blogs \| Training \| Components Technical Support cypress.com/support PSoC cypress.com/psoc Power Management ICs cypress.com/pmic Touch Sensing cypress.com/touch USB Controllers cypress.com/usb Wireless Connectivity cypress.com/wireless Cypress Semiconductor Corporation, This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC “Cypress” . This document, including any software or firmware included or referenced in this document “Software” , is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license without the right to sublicense 1 under its copyright rights in the Software a for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and b to distribute the Software in binary code form externally to end users either directly or indirectly through resellers and distributors , solely for use on Cypress hardware product units, and 2 under those claims of Cypress's patents that are infringed by the Software as provided by Cypress, unmodified to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems including resuscitation equipment and surgical implants , pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage “Unintended Uses” . A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. Page 44 of 44

PDF Datasheet Preview

MB39A134

DC/DC Converter IC for Charging Li-ion Battery

The MB39A134 is a DC/DC converter IC for charging Li-ion battery, which is suitable for down conversion, and uses pulse width modulation PWM for controlling the charge voltage and current independently. MB39A134 has a AC adapter detection comparator independent of the DC/DC converter controller, and can control the source of power supply to a system. It supports a wide input voltage range, enables low current consumption in standby mode, and can control the charge voltage and charge current with high precision, which is perfect for the built-in Li-ion battery charger used in devices such as notebook PC.
• Support 2, 3 and 4 Cell Battery Pack
• Built-in two constant current control loops
• Built-in AC adapter detection function ACOK pin
• Charge voltage accuracy Ta C to
• Built-in charging voltage control without external setting resistor V/Cell or V/Cell Adjustable to charge voltage with external resistor
• Built-in two high accurate current detection amplifiers 1% At input voltage difference 100 mV 5% At input voltage difference 20 mV

Input offset voltage 0 mV Current Amp1 +3 mV Current Amp2
• Built-in Charging Current Control without external resistor RS 20 A

Adjustable charging current with external resistor
• Setting of switching frequency using an external resistor

Frequency setting capacitor integrated 100 kHz to 2 MHz
• Built-in under voltage lockout protection
• In standby mode ICC 6 µA Typ , only AC adapter detection function is operated
• Built-in VH regulator for reducing Qg loss of P-ch MOS FET
• Package TSSOP-24
• Built-in charger for Notebook PC
• Handy terminal device etc.
• San Jose, CA 95134-1709
• 408-943-2600

MB39A134

Contents

Description 1 Features 1 Applications 1 Pin Assignment 3 Pin Descriptions 4 Block Diagram 5 Absolute Maximum Ratings 6 Recommended Operating Conditions 7 Electrical Characteristics 8 Typical Characteristics 12 Functional Description 14

DC/DC Converter Block 14 Protection Functions 16 Transit Response When A Load Changes Suddenly 21

Connection Without Using The Current Amp1, Current Amp2 And The Error Amp1, Error Amp2 22
Input/Output Pin Equivalent Circuit Diagram 23 Typical Application Circuit 26 Application Note 30 Reference Data 39 Usage Precaution 41 Ordering Information 41 RoHS Compliance Information 41 Package Dimension 42 Document History 43 Sales, Solutions, and Legal Information 44

Page 2 of 44

Pin Assignment

TOP VIEW
−INC1

OUTC1

ADJ1

COMP1

ACOK

VREF

ACIN

COMP2

ADJ2

OUTC2

CELLS

BATT
+INC1

ADJ3

COMP3
+INC2

STF024

MB39A134

Page 3 of 44

MB39A134

Pin Descriptions

Pin No. Pin Name I/O
-INC1

I Current detection amplifier Current Amp1 inverted input pin.

OUTC1

O Current detection amplifier Current Amp1 output pin.

ADJ1

I Error amplifier Error Amp1 non-inverted input pin.

COMP1

O Error amplifier Error Amp1 output pin.

ACOK

O AC adapter voltage detection block AC Comp. output pin.

ACIN H ACOK L, ACIN L ACOK Hi-Z

VREF

O Reference voltage output pin.

ACIN

I AC adapter voltage detection block AC Comp. input pin.
Ordering Information

MB39A134PFT

Package 24-pin plastic TSSOP

STF024

Remarks

RoHS Compliance Information

The LSI products of Cypress with “E1” are compliant with RoHS Directive, and has observed the standard of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls PBB , and polybrominated diphenyl ethers PBDE . A products whose part number has trailing characters “E1” is RoHS compliant.

Page 41 of 44

Package Dimension

Package Code STF024

INDEX AREA

TOP VIEW

C A-B D

MB39A134

BOTTOM VIEW

DETAIL A

SEATING

PLANE

C A-B D 8

SIDE VIEW

L2 GAUGE A

PLANE

DETAIL A

SECTION A-A'

DIMENSIONS SYMBOL

MIN. NOM. MAX.
1 27 6
/ / ' , 0 1 6 , 2 1 6 5 , 1 0 , / / , 0 7 5
' , 0 1 6 , 2 1 , 1 * 1 ' 7 2 / 5 1 & , 1 * 3 5 6 0 < 0
' , 0 1 6 , 2 1 , 1 * ' , 1 & / 8 ' 0 2 / ' / 6 + ' , 0 1 6 , 2 1 , 1 * ' 2 6 1 2 7 , 1 & / 8 ' , 1 7 5 / ' / 6 + 2 5 3 5 2 7 5 8 6 , 2 1 , 1 7 5 / ' / 6 + 2 5 3 5 2 7 5 8 6 , 2 1 6 + / / 1 2 7 & ' P 3 5 6 , ' ' D Q G ' , 0 1 6 , 2 1 5 ' 7 5 0 , 1 ' ' 7 8 0 +
7 + 3 & * 7 2 3 0 < % 6 0 / / 5 7 + 1 7 + 3 & * % 2 7 2 0 ' , 0 1 6 , 2 1 , 1 * D Q 5 ' 7 5 0 , 1 7 + 2 8 7 5 0 2 6 7 5 0 2 7 + 3 / 6 7 , % 2 ' & / 8 6 , 9 2 0 2 / / 6 + 7 + % 5 % 8 5 6 * 7 % 8 5 6 1 ' , 1 7 5 / ' / 6 + % 8 7 , 1 & / 8 ' , 1 * 1 0 , 6 0 7 & % 7 + 7 2 1 % 2 7 2 0 2 7 + 3 / 6 7 , % 2 ' <
' 7 8 0 6 % 7 2 % ' 7 5 0 , 1 ' 7 ' 7 8 0 +
1 , 6 7 + 0 , 0 8 0 1 8 0 % 5 2 7 5 0 , 1 / 3 2 6 , 7 , 2 1 6 2 5 7 + 6 3 & , , ' 3 & * / 1 * 7 +
7 + ' , 0 1 6 , 2 1 3 / < 7 2 7 + / 7 6 & 7 , 2 1 2 7 + / ' % 7 1 P 7 2 P 5 2 0 7 + / 7 , 3
' , 0 1 6 , 2 1 E ' 2 6 1 2 7 , 1 & / 8 ' 7 + ' 0 % 5 3 5 2 7 5 8 6 , 2 1 / / 2 % / ' 0 % 5 3 5 2 7 5 8 6 , 2 1 6 + / / % P 7 2 7 / , 1 & 6 2 7 + E ' , 0 1 6 , 2 1 0 , 0 8 0 7 5 , & 2 1 ' , 7 , 2 1 7 + ' 0 % 0 1 2 % / 2 & 7 2 7 + / 2 5 ' , 8 2 7 + 2 7
7 + , 6 & + 0 5 7 8 5 , 6 2 3 7 , 2 1 / / , 7 , 6 1 2 7 3 5 6 1 7 + 1 3 , 1 , ' 1 7 , , 0 8 6 % / 2 & 7 , 7 + , 7 + , 1 ' 5 , 1 ' , & 7 '
, 6 ' , 1 ' 6 7 + 9 5 7 , & / ' , 6 7 1 & 5 2 0 7 + 6 7 , 1 * 3 / 1 7 2 7 + / 2 6 3 2 , 1 2 7 + 3 & * % 2 ' & / 8 ' , 1 * 7 + / , 1 2 5 7 + 5 0 1 + 1 & 0 1 2 & 9 , 7 ' 2 3 & * & 2 1 , * 8 5 7 , 2 1 6

JEDEC SPECIFICATION NO. REF N/A

Page 42 of 44

MB39A134

Document History
Updated Ordering Information:

Change the package name from FPT-24P-M08 to STF024
5626720

HIXT
02/13/2017

Deleted the words, “Lead Free version”, in the Remarks.
Deleted “Ev Board Ordering Information”

Deleted “Marking Format Lead Free Version ”

Deleted “Labeling Sample Lead Free Version ”

Deleted “MB39A134PFT Recommended Conditions Of Moisture Sensitivity Level”

Updated Package Dimension Updated to Cypress format
5703758 AESATMP8 04/20/2017 Updated logo and Copyright.

Page 43 of 44

MB39A134

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations.

Products Microcontrollers
cypress.com/arm

Solutions PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP | PSoC 6

Automotive Clocks & Buffers Interface Internet of Things Memory Microcontrollers
cypress.com/automotive cypress.com/clocks
cypress.com/interface cypress.com/iot
cypress.com/memory cypress.com/mcu

Cypress Developer Community Forums | WICED IOT Forums | Projects | Video | Blogs | Training | Components

Technical Support cypress.com/support

PSoC
cypress.com/psoc

Power Management ICs
cypress.com/pmic

Touch Sensing
cypress.com/touch

USB Controllers
cypress.com/usb

Wireless Connectivity
cypress.com/wireless

Cypress Semiconductor Corporation, This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC “Cypress” . This document, including any software or firmware included or referenced in this document “Software” , is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license without the right to sublicense 1 under its copyright rights in the Software a for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and b to distribute the Software in binary code form externally to end users either directly or indirectly through resellers and distributors , solely for use on Cypress hardware product units, and 2 under those claims of Cypress's patents that are infringed by the Software as provided by Cypress, unmodified to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems including resuscitation equipment and surgical implants , pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage “Unintended Uses” . A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners.

Page 44 of 44

More datasheets: AT89C5121-SK1 | T85C5121-S3SIL | T85C5121-ICSIL | CS220-16D | CS220-16M | CS220-16N | CS220-16P | CS220-16B | MB39A134PFT-G-JN-EFE1 | MB39A134PFT-G-JNE1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB39A134PFT-G-BNDE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB39A134PFT-G-BNDE1 508284