CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18
Part | Datasheet |
---|---|
![]() |
CY7C1423AV18-250BZC (pdf) |
Related Parts | Information |
---|---|
![]() |
CY7C1423AV18-267BZC |
PDF Datasheet Preview |
---|
CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 36-Mbit DDR-II SIO SRAM 2-Word Burst Architecture 36-Mbit DDR-II SIO SRAM 2-Word Burst Architecture • 36-Mbit density 4M x 8, 4M x 9, 2M x 18, 1M x 36 • 300 MHz clock for high bandwidth • 2-word burst for reducing address bus frequency • Double Data Rate DDR interfaces data transferred at 600 MHz at 300 MHz • Two input clocks K and K for precise DDR timing SRAM uses rising edges only • Two input clocks for output data C and C to minimize clock skew and flight time mismatches • Echo clocks CQ and CQ simplify data capture in high-speed systems • Synchronous internally self-timed writes • 1.8V core power supply with HSTL inputs and outputs • Variable drive HSTL output buffers • Expanded HSTL output voltage • Available in 165-Ball FBGA package 15 x 17 x mm • Offered in both Pb-free and non Pb-free packages • JTAG compatible test access port • Delay Lock Loop DLL for accurate data placement Configurations CY7C1422AV18 4M x 8 CY7C1429AV18 4M x 9 CY7C1423AV18 2M x 18 CY7C1424AV18 1M x 36 Functional Description The CY7C1422AV18, CY7C1429AV18, CY7C1423AV18, and CY7C1424AV18 are V Synchronous Pipelined SRAMs, equipped with Double Data Rate Separate IO DDR-II SIO architecture. The DDR-II SIO consists of two separate ports the read port and the write port to access the memory array. The read port has data outputs to support read operations and the write port has data inputs to support write operations. The DDR-II SIO has separate data inputs and data outputs to completely eliminate the need to “turn-around” the data bus required with common IO devices. Access to each port is accomplished through a common address bus. Addresses for read and write are latched on alternate rising edges of the input K clock. Write data is registered on the rising edges of both K and K. Read data is driven on the rising edges of C and C if provided, or on the rising edge of K and K if C/C are not provided. Each address location is associated with two 8-bit words in the case of CY7C1422AV18, two 9-bit words in the case of CY7C1429AV18, two 18-bit words in the case of CY7C1423AV18, and two 36-bit words in the case of CY7C1424AV18 that burst sequentially into or out of the device. Asynchronous inputs include an output impedance matching input ZQ . Synchronous data outputs are tightly matched to the two output echo clocks CQ/CQ, eliminating the need to capture data separately from each individual DDR-II SIO SRAM in the system design. Output data clocks C/C enable maximum system clocking and data synchronization flexibility. All synchronous inputs pass through input registers controlled by the K or K input clocks. All data outputs pass through output registers controlled by the C or C or K or K in a single clock domain input clocks. Writes are conducted with on-chip synchronous self-timed write circuitry. • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Logic Block Diagram CY7C1422AV18 D[7:0] A 20:0 21 Address Register K DOFF CLK Gen. R/W VREF NWS[1:0] Control Logic Write Add. Decode Read Add. Decode Write Data Reg Write Data Reg 2M x 8 Array 2M x 8 Array Read Data Reg. 16 8 Control Logic LD R/W C Reg. Reg. 8 Reg. Q[7:0] Logic Block Diagram CY7C1429AV18 D[8:0] A 20:0 21 Address Register Power Up Sequence 21 DLL Constraints 21 Maximum Ratings 22 Operating Range 22 Electrical Characteristics 22 DC Electrical Characteristics 22 AC Electrical Characteristics 23 Capacitance 24 Thermal Resistance 24 Switching Characteristics 25 Switching Waveforms 27 Ordering Information 28 Ordering Code Definitions 28 Package Diagram 29 Acronyms 30 Document Conventions 30 Units of Measure 30 Document History Page 31 Sales, Solutions, and Legal Information 33 Worldwide Sales and Design Support 33 Products 33 PSoC Solutions 33 Page 4 of 33 [+] Feedback CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Selection Guide Description Maximum Operating Frequency Maximum Operating Current 300 MHz 278 MHz 278 775 815 890 250 MHz 250 700 740 800 200 MHz 200 600 665 167 MHz 167 500 560 Unit MHz mA Page 5 of 33 [+] Feedback CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Pin Configuration The pin configuration for CY7C1422AV18, CY7C1429AV18, CY7C1423AV18, and CY7C1424AV18 follow. [1] 165-ball FPBGA 15 x 17 x mm Pinout CY7C1422AV18 4M x 8 CQ NC/72M NWS1 K NC/144M LD A NC/288M K NWS0 VDDQ VDDQ VDDQ VDDQ VDDQ VDDQ DOFF VREF VDDQ VDDQ VDDQ VDDQ VREF VDDQ VDDQ VDDQ VDDQ VDDQ VDDQ Ordering Information Cypress offers other versions of this type of product in many different configurations and features. The below table contains only the list of parts that are currently available. For a complete listing of all options, visit the Cypress website at and refer to the product summary page at or contact your local sales representative. Cypress maintains a worldwide network of offices, solution centers, manufacturer's representatives and distributors. To find the office closest to you, visit us at t Speed MHz Ordering Code Package Diagram Package Type Operating Range 250 CY7C1423AV18-250BZC 51-85195 165-ball Fine Pitch Ball Grid Array 15 x 17 x mm Commercial 267 CY7C1423AV18-267BZC Ordering Code Definitions CY 7 C 14XX A V18 - XXX BZ X, C Package Type BZ = FPBGA, X = Pb-free, C = Commercial Speed 250 MHz / 267 MHz Voltage V Process Technology 90 nm 36-Mbit DDR II SRAM 2-word burst architecture Technology CMOS Marketing Code 7 = SRAM Company ID CY = Cypress Page 28 of 33 [+] Feedback Package Diagram CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Figure 165-ball FBGA 15 x 17 x mm , 51-85195 51-85195 *B Page 29 of 33 [+] Feedback Acronyms Acronym DDR DLL FPBGA HSTL JTAG LSB MSB PLL SRAM TAP TCK TDO TDI TMS Description double data rate delay lock loop fine-pitch ball grid array high-speed transceiver logic joint test action group least significant bit most significant bit phase-locked loop static random access memory test access port test clock test data out test data in test mode select Document Conventions Units of Measure Symbol ns V µA mA mm ms MHz pF °C W Unit of Measure nano seconds Volts ohms micro Amperes milli Amperes milli meter milli seconds Mega Hertz pico Farad degree Celcius Watts CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Page 30 of 33 [+] Feedback CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Document History Page Document Title 36-Mbit DDR-II SIO SRAM 2-Word Burst Architecture Document Number 38-05617 ECN NO. Submission DATE ORIG. OF CHANGE DESCRIPTION OF CHANGE ** 247331 See ECN SYT New Data Sheet *A 326519 See ECN SYT Removed CY7C1429AV18 from the title Included 300 MHz Speed grade Replaced TBDs with their respective values for IDD and ISB1 Added Industrial temperature Replaced the TBDs on the Thermal Characteristics Table to = 17.2C/W and = 3.2C/W Replaced TBDs in the Capacitance Table to their respective values for the 165 FBGA Package Changed typo of bit # 47 to bit # 108 under the EXTEST OUTPUT BUS TRI-STATE on Page 17 Added lead-free Product Information Updated the Ordering Information by Shading and Unshading MPNs as per availability *B 413953 See ECN Converted from preliminary to final Added CY7C1429AV18 part number to title Added 278-MHz speed Bin Changed C, C Description in Feature Section and Pin Description Changed address of Cypress Semiconductor Corporation on Page# 1 from “3901 North First Street” to “198 Champion Court” Added Power-up sequence and Wave form on page# 18 Added Footnote# 13, 14, 15 on page# 18 Replaced Three-state with Tri-state Changed the description of IX from Input Load Current to Input Leakage Current on page# 19 Modified the IDD and ISB values Modified test condition in Footnote #17 on page# 19 from VDDQ < VDD to VDDQ < VDD Replaced Package Name column with Package Diagram in the Ordering Information table Updated Ordering Information Table *C 468029 See ECN Modified the ZQ Definition from Alternately, this pin can be connected directly to VDD to Alternately, this pin can be connected directly to VDDQ Included Maximum Ratings for Supply Voltage on VDDQ Relative to GND Changed the Maximum Ratings for DC Input Voltage from VDDQ to VDD Changed tTH and tTL from 40 ns to 20 ns, changed tTMSS, tTDIS, tCS, tTMSH, tTDIH, tCH from 10 ns to 5 ns and changed tTDOV from 20 ns to 10 ns in TAP AC Switching Characteristics table Modified Power-Up waveform Changed the Maximum rating of Ambient Temperature with Power Applied from C to +85 C to C to +125 C Added additional notes in the AC parameter section Modified AC Switching Waveform Updated the Typo in the AC Switching Characteristics Table Updated the Ordering Information Table Page 31 of 33 [+] Feedback CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Document History Page Document Title 36-Mbit DDR-II SIO SRAM 2-Word Burst Architecture Document Number 38-05617 *D 2511746 See ECN VKN/AESA Updated Logic Block diagram Updated IDD/ISB specs Added footnote# 19 related to IDD Updated Power-up sequence waveform and it’s description Changed DLL minimum operating frequency from 80MHz to 120MHz Changed tCYC max spec to 8.4ns for all speed bins Modified footnotes 21 and 28 *E 2898663 03/24/2010 NJY Removed inactive parts from Ordering Information table Updated package diagram. *F 2906713 04/07/2010 NJY Removed inactive part from Ordering Information table. *G 3068494 10/21/10 HMLA Removed inactive parts - CY7C1424AV18-250BZC, CY7C1423AV18-250BZXC, CY7C1422AV18-250BZI, CY7C1429AV18-250BZI, CY7C1424AV18-250BZI , and added active parts - CY7C1423AV18-267BZC, CY7C1423AV18-267BZXC. *H 3088678 11/27/2010 NJY Added Acronyms and Units of Measure. Minor edits and updated in new template. *I 3101284 12/03/2010 NJY Updated Ordering Information. Page 32 of 33 [+] Feedback CY7C1422AV18, CY7C1429AV18 CY7C1423AV18, CY7C1424AV18 Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. Products Automotive Clocks & Buffers Interface Lighting & Power Control Memory Optical & Image Sensing PSoC Touch Sensing USB Controllers Wireless/RF cypress.com/go/automotive cypress.com/go/clocks cypress.com/go/interface cypress.com/go/powerpsoc cypress.com/go/plc cypress.com/go/memory cypress.com/go/image cypress.com/go/psoc cypress.com/go/touch cypress.com/go/USB cypress.com/go/wireless PSoC Solutions psoc.cypress.com/solutions PSoC 1 | PSoC 3 | PSoC 5 Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. Page 33 of 33 DDR RAMs and QDR RAMs comprise a new family of products developed by Cypress, Hitachi, IDT, Micron, NEC, and Samsung. All products and company names mentioned in this document may be the trademarks of their respective holders. [+] Feedback |
More datasheets: 80-000535 | 31-10-NB | 94768 | 94770 | 94774 | 94778 | 94780 | 94776 | 94772 | 94782 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY7C1423AV18-250BZC Datasheet file may be downloaded here without warranties.