CY7C1020BN-12ZXCT

CY7C1020BN-12ZXCT Datasheet

CY7C1020BN

Part	Datasheet
CY7C1020BN-12ZXCT	CY7C1020BN-12ZXCT (pdf)

Related Parts	Information
CY7C1020BN-12ZXC	CY7C1020BN-12ZXC
CY7C1020BN-15ZXCT	CY7C1020BN-15ZXCT
CY7C1020BN-12VXCT	CY7C1020BN-12VXCT
CY7C1020BN-12VXC	CY7C1020BN-12VXC
CY7C1020BN-15ZXC	CY7C1020BN-15ZXC

PDF Datasheet Preview
ROW DECODER A8 A9 A10 A11 A12 A13 A14 SENSE AMPS • High speed tAA = 12, 15 ns • CMOS for optimum speed/power • Low active power 825 mW max. • Low CMOS standby power L version only mW max. • Automatic power-down when deselected • Independent control of upper and lower bits • Available in 44-pin TSOP II and 400-mil SOJ Logic Block Diagram DATA IN DRIVERS 32K x 16 RAM Array COLUMN DECODER CY7C1020BN 32K x 16 Static RAM Functional Description The CY7C1020BN is a high-performance CMOS static RAM organized as 32,768 words by 16 bits. This device has an automatic power-down feature that significantly reduces power consumption when deselected. Writing to the device is accomplished by taking Chip Enable CE and Write Enable WE inputs LOW. If Byte Low Enable BLE is LOW, then data from I/O pins I/O1 through I/O8 , is written into the location specified on the address pins A0 through A15 . If Byte High Enable BHE is LOW, then data from I/O pins I/O9 through I/O16 is written into the location specified on the address pins A0 through A15 . Reading from the device is accomplished by taking Chip Enable CE and Output Enable OE LOW while forcing the Write Enable WE HIGH. If Byte Low Enable BLE is LOW, then data from the memory location specified by the address pins will appear on I/O1 to I/O8. If Byte High Enable BHE is LOW, then data from memory will appear on I/O9 to I/O16. See the truth table at the back of this data sheet for a complete description of read and write modes. The input/output pins I/O1 through I/O16 are placed in a high-impedance state when the device is deselected CE HIGH , the outputs are disabled OE HIGH , the BHE and BLE are disabled BHE, BLE HIGH , or during a write operation CE LOW, and WE LOW . The CY7C1020BN is available in standard 44-pin TSOP Type II and 400-mil-wide SOJ packages. BHE WE CE OE BLE Pin Configuration SOJ / TSOP II Top View A3 2 A2 3 A1 4 A0 5 CE 6 I/O1 7 I/O2 8 I/O3 9 I/O4 10 VCC 11 VSS 12 I/O5 13 I/O6 14 I/O7 15 I/O8 16 WE 17 A15 18 A14 19 A13 20 A12 21 NC 22 44 A5 43 A6 42 A7 41 OE 40 BHE 39 BLE 38 I/O16 37 I/O15 36 I/O14 35 I/O13 34 VSS 33 VCC 32 I/O12 31 I/O11 30 I/O10 29 I/O9 28 NC 27 A8 26 A9 25 A10 24 A11 23 NC Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CY7C1020BN Selection Guide Maximum Access Time ns Maximum Operating Current mA Maximum CMOS Standby Current mA 7C1020BN-12 140 3 7C1020BN-15 130 3 Maximum Ratings Above which the useful life may be impaired. For user guidelines, not tested. Storage Temperature to +150°C Ambient Temperature with Power to +125°C Supply Voltage on VCC to Relative GND[1] to +7.0V DC Voltage Applied to Outputs in High Z State[1] to VCC+0.5V DC Input to VCC+0.5V Electrical Characteristics Over the Operating Range Current into Outputs 20 mA Static Discharge >2001V per MIL-STD-883, Method 3015 Latch-Up Current >200 mA Operating Range Range Commercial Industrial Ordering Information Speed ns Ordering Code Package Diagram Package Type 12 CY7C1020BN-12VC 51-85082 44-Lead 400-Mil Molded SOJ CY7C1020BN-12VXC 51-85082 44-Lead 400-Mil Molded SOJ Pb-free CY7C1020BN-12ZC 51-85087 44-pin TSOP Type II CY7C1020BN-12ZXC 51-85087 44-pin TSOP Type II Pb-free 15 CY7C1020BN-15ZC 51-85087 44-pin TSOP Type II CY7C1020BN-15ZXC 51-85087 44-pin TSOP Type II Pb-free Please contact local sales representative regarding availability of these parts. Power Standby ISB Active ICC Active ICC Active ICC Active ICC Active ICC Active ICC Active ICC Active ICC Operating Range Commercial Page 6 of 8 [+] Feedback Package Diagrams 44-Lead 400-Mil Molded SOJ 51-85082 CY7C1020BN 44-Pin TSOP II 51-85087 51-85082-B 51-85087-A All product and company names mentioned in this document may be the trademarks of their respective holders. Page 7 of 8 Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. [+] Feedback Document History Page Document Title CY7C1020BN 32K x 16 Static RAM Document # 001-06443 Issue ECN NO. Date Orig. of Change Description of Change 426812 See ECN NXR New Data Sheet CY7C1020BN Page 8 of 8 [+] Feedback

PDF Datasheet Preview

ROW DECODER A8 A9 A10 A11 A12 A13 A14

SENSE AMPS
• High speed tAA = 12, 15 ns
• CMOS for optimum speed/power
• Low active power
825 mW max.
• Low CMOS standby power L version only
mW max.
• Automatic power-down when deselected
• Independent control of upper and lower bits
• Available in 44-pin TSOP II and 400-mil SOJ

Logic Block Diagram

DATA IN DRIVERS
32K x 16

RAM Array

COLUMN DECODER

CY7C1020BN
32K x 16 Static RAM

Functional Description

The CY7C1020BN is a high-performance CMOS static RAM organized as 32,768 words by 16 bits. This device has an automatic power-down feature that significantly reduces power consumption when deselected. Writing to the device is accomplished by taking Chip Enable CE and Write Enable WE inputs LOW. If Byte Low Enable BLE is LOW, then data from I/O pins I/O1 through I/O8 , is written into the location specified on the address pins A0 through A15 . If Byte High Enable BHE is LOW, then data from I/O pins I/O9 through I/O16 is written into the location specified on the address pins A0 through A15 . Reading from the device is accomplished by taking Chip Enable CE and Output Enable OE LOW while forcing the Write Enable WE HIGH. If Byte Low Enable BLE is LOW, then data from the memory location specified by the address pins will appear on I/O1 to I/O8. If Byte High Enable BHE is LOW, then data from memory will appear on I/O9 to I/O16. See the truth table at the back of this data sheet for a complete description of read and write modes. The input/output pins I/O1 through I/O16 are placed in a high-impedance state when the device is deselected CE HIGH , the outputs are disabled OE HIGH , the BHE and BLE are disabled BHE, BLE HIGH , or during a write operation CE LOW, and WE LOW . The CY7C1020BN is available in standard 44-pin TSOP Type II and 400-mil-wide SOJ packages.

BHE WE CE OE BLE

Pin Configuration

SOJ / TSOP II Top View

A3 2 A2 3 A1 4 A0 5 CE 6 I/O1 7 I/O2 8 I/O3 9

I/O4 10 VCC 11 VSS 12 I/O5 13 I/O6 14 I/O7 15 I/O8 16 WE 17

A15 18 A14 19 A13 20 A12 21 NC 22
44 A5 43 A6
42 A7 41 OE
40 BHE 39 BLE
38 I/O16 37 I/O15 36 I/O14 35 I/O13 34 VSS 33 VCC 32 I/O12 31 I/O11 30 I/O10 29 I/O9 28 NC 27 A8 26 A9 25 A10 24 A11 23 NC

Cypress Semiconductor Corporation
• 198 Champion Court
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CY7C1020BN

Selection Guide

Maximum Access Time ns Maximum Operating Current mA Maximum CMOS Standby Current mA
7C1020BN-12 140 3
7C1020BN-15 130 3

Maximum Ratings

Above which the useful life may be impaired. For user guidelines, not tested. Storage Temperature to +150°C

Ambient Temperature with Power to +125°C Supply Voltage on VCC to Relative GND[1] to +7.0V DC Voltage Applied to Outputs in High Z State[1] to VCC+0.5V DC Input to VCC+0.5V

Electrical Characteristics Over the Operating Range

Current into Outputs 20 mA

Static Discharge >2001V per MIL-STD-883, Method 3015

Latch-Up Current >200 mA

Operating Range

Range Commercial Industrial
Ordering Information

Speed ns
Ordering Code

Package Diagram

Package Type
12 CY7C1020BN-12VC
51-85082 44-Lead 400-Mil Molded SOJ

CY7C1020BN-12VXC
51-85082 44-Lead 400-Mil Molded SOJ Pb-free

CY7C1020BN-12ZC
51-85087 44-pin TSOP Type II

CY7C1020BN-12ZXC
51-85087 44-pin TSOP Type II Pb-free
15 CY7C1020BN-15ZC
51-85087 44-pin TSOP Type II

CY7C1020BN-15ZXC
51-85087 44-pin TSOP Type II Pb-free

Please contact local sales representative regarding availability of these parts.

Power Standby ISB Active ICC Active ICC Active ICC Active ICC Active ICC Active ICC Active ICC Active ICC

Operating Range

Commercial

Page 6 of 8 [+] Feedback

Package Diagrams
44-Lead 400-Mil Molded SOJ 51-85082

CY7C1020BN
44-Pin TSOP II 51-85087
51-85082-*B
51-85087-*A

All product and company names mentioned in this document may be the trademarks of their respective holders.

Page 7 of 8

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
[+] Feedback

Document History Page

Document Title CY7C1020BN 32K x 16 Static RAM Document # 001-06443

Issue ECN NO. Date

Orig. of Change Description of Change
426812 See ECN NXR New Data Sheet

CY7C1020BN

Page 8 of 8 [+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY7C1020BN-12ZXCT Datasheet file may be downloaded here without warranties.

Datasheet ID: CY7C1020BN-12ZXCT 507886