CY7C1019CV33-10ZXIT

CY7C1019CV33-10ZXIT Datasheet

CY7C1019CV33

Part	Datasheet
CY7C1019CV33-10ZXIT	CY7C1019CV33-10ZXIT (pdf)

Related Parts	Information
CY7C1019CV33-10ZXI	CY7C1019CV33-10ZXI
CY7C1019CV33-12ZXC	CY7C1019CV33-12ZXC
CY7C1019CV33-12ZXCT	CY7C1019CV33-12ZXCT
CY7C1019CV33-15ZXIT	CY7C1019CV33-15ZXIT
CY7C1019CV33-15ZXI	CY7C1019CV33-15ZXI
CY7C1019CV33-12VC	CY7C1019CV33-12VC

PDF Datasheet Preview
CY7C1019CV33 1 Mbit 128K x 8 Static RAM • Temperature Ranges Industrial to 85°C Automotive-A to 85°C • Pin and Function compatible with CY7C1019BV33 • High Speed tAA = 10 ns • CMOS for optimum Speed and Power • Data Retention at 2.0V • Center Power/Ground Pinout • Automatic Power Down when deselected • Easy Memory Expansion with CE and OE Options • Available in Pb-free and non Pb-free 48-Ball VFBGA, 32-Pin TSOP II and 400-mil SOJ Package Functional Description The CY7C1019CV33 is a high performance CMOS static RAM organized as 131,072 words by 8 bits. Easy memory expansion is provided by an active LOW Chip Enable CE , an active LOW Output Enable OE , and tristate drivers. This device has an automatic power down feature that significantly reduces power consumption when deselected. Writing to the device is accomplished by taking Chip Enable CE and Write Enable WE inputs LOW. Data on the eight I/O pins I/O0 through I/O7 is then written into the location specified on the address pins A0 through A16 . Reading from the device is accomplished by taking Chip Enable CE and Output Enable OE LOW while forcing Write Enable WE HIGH. Under these conditions, the contents of the memory location specified by the address pins will appear on the I/O pins. The eight input/output pins I/O0 through I/O7 are placed in a high impedance state when the device is deselected CE HIGH , the outputs are disabled OE HIGH , or during a write operation CE LOW, and WE LOW . Logic Block Diagram I/O0 INPUT BUFFER I/O1 ROW DECODER SENSE AMPS A1 A2 I/O2 A4 A5 A6 128K x 8 ARRAY I/O3 I/O4 I/O5 COLUMN DECODER POWER DOWN I/O6 I/O7 A9 A 10 A 11 A 12 A 13 A 14 A 15 A 16 • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CY7C1019CV33 Selection Guide Description Maximum Access Time Maximum Operating Current Maximum Standby Current Pin Configuration Figure 48-Ball VFBGA Top View [1] 12 34 56 NC OE A2 A6 A 7 NC I/O0 NC A1 A5 CE I/O7 I/O1 NC A0 A 4 NC I/O6 VSS NC A 3 NC VCC NC VSS I/O2 NC A14 A11 I/O4 I/O5 I/O3 NC A15 A12 WE A8 NC A10 A16 A13 A9 NC Ordering Information Speed ns 10 Ordering Code CY7C1019CV33-10VC CY7C1019CV33-10ZXC CY7C1019CV33-10ZXI CY7C1019CV33-10ZXA CY7C1019CV33-12VC CY7C1019CV33-12ZC CY7C1019CV33-12ZXC CY7C1019CV33-12VI CY7C1019CV33-12BVXI CY7C1019CV33-15VC CY7C1019CV33-15VXC CY7C1019CV33-15ZXC CY7C1019CV33-15ZXI Package Diagrams Package Diagram 51-85033 51-85095 51-85095 51-85033 51-85095 51-85033 51-85150 51-85033 51-85033 51-85095 51-85095 Package Type 32-pin 400-Mil Molded SOJ 32-pin TSOP II Pb-Free 32-pin TSOP II Pb-Free 32-pin TSOP II Pb-Free 32-pin 400-Mil Molded SOJ 32-pin TSOP II 32-pin TSOP II Pb-Free 32-pin 400-Mil Molded SOJ 48-ball VFBGA Pb-Free 32-pin 400-Mil Molded SOJ 32-pin 400-Mil Molded SOJ Pb-Free 32-pin TSOP II Pb-Free 32-pin TSOP II Pb-Free Figure 32-pin 400-Mil Molded SOJ CY7C1019CV33 Operating Range Commercial Industrial Automotive-A Commercial Industrial Commercial Industrial 51-85033-B Page 7 of 10 [+] Feedback Figure 32-Pin TSOP II CY7C1019CV33 51-85095-* Page 8 of 10 [+] Feedback CY7C1019CV33 TOP VIEW A1 CORNER 12 3 4 5 6 A B C D E F G H Figure 48-Ball VFBGA 6 x 8 x 1 mm BOTTOM VIEW A1 CORNER M C M C A B Ø0.30±0.05 48X 6 54 3 2 1 A B C D E F G H B 0.15 4X SEATING PLANE C 51-85150-*D C MAX. MAX. Page 9 of 10 [+] Feedback CY7C1019CV33 Document History Page Document Title CY7C1019CV33 1 Mbit 128K x 8 Static RAM Document Number 38-05130 ECN NO. Added lead-free parts in Ordering Information Table Replaced Package Name column with Package Diagram in the Ordering Information Table 493543 See ECN NXR Removed 8 ns speed bin from Product offering Added note #1 on page #2 Changed the description of IIX from Input Load Current to Input Leakage Current in DC Electrical Characteristics table Removed IOS parameter from DC Electrical Characteristics table Updated Ordering Information 2761448 09/09/2009 VKN Included Automotive-A information Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at cypress.com/sales. Products PSoC Clocks & Buffers Wireless Memories Image Sensors psoc.cypress.com clocks.cypress.com wireless.cypress.com memory.cypress.com image.cypress.com Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. All products and company names mentioned in this document may be the trademarks of their respective holders. Page 10 of 10 [+] Feedback

PDF Datasheet Preview

CY7C1019CV33
1 Mbit 128K x 8 Static RAM
• Temperature Ranges Industrial to 85°C Automotive-A to 85°C
• Pin and Function compatible with CY7C1019BV33
• High Speed tAA = 10 ns
• CMOS for optimum Speed and Power
• Data Retention at 2.0V
• Center Power/Ground Pinout
• Automatic Power Down when deselected
• Easy Memory Expansion with CE and OE Options
• Available in Pb-free and non Pb-free 48-Ball VFBGA, 32-Pin TSOP II and 400-mil SOJ Package

Functional Description

The CY7C1019CV33 is a high performance CMOS static RAM organized as 131,072 words by 8 bits. Easy memory expansion is provided by an active LOW Chip Enable CE , an active LOW Output Enable OE , and tristate drivers. This device has an automatic power down feature that significantly reduces power consumption when deselected.

Writing to the device is accomplished by taking Chip Enable CE and Write Enable WE inputs LOW. Data on the eight I/O pins I/O0 through I/O7 is then written into the location specified on the address pins A0 through A16 .

Reading from the device is accomplished by taking Chip Enable CE and Output Enable OE LOW while forcing Write Enable WE HIGH. Under these conditions, the contents of the memory location specified by the address pins will appear on the I/O pins.

The eight input/output pins I/O0 through I/O7 are placed in a high impedance state when the device is deselected CE HIGH , the outputs are disabled OE HIGH , or during a write operation CE LOW, and WE LOW .

Logic Block Diagram

I/O0

INPUT BUFFER

I/O1

ROW DECODER SENSE AMPS

A1 A2

I/O2

A4 A5 A6
128K x 8 ARRAY

I/O3 I/O4

I/O5

COLUMN DECODER

POWER DOWN

I/O6

I/O7

A9 A 10 A 11 A 12 A 13 A 14 A 15 A 16
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CY7C1019CV33

Selection Guide

Description Maximum Access Time Maximum Operating Current Maximum Standby Current

Pin Configuration

Figure 48-Ball VFBGA Top View [1]
12 34 56

NC OE A2 A6 A 7 NC I/O0 NC A1 A5 CE I/O7 I/O1 NC A0 A 4 NC I/O6 VSS NC A 3 NC VCC NC VSS I/O2 NC A14 A11 I/O4 I/O5 I/O3 NC A15 A12 WE A8 NC A10 A16 A13 A9 NC
Ordering Information

Speed ns 10
Ordering Code

CY7C1019CV33-10VC CY7C1019CV33-10ZXC CY7C1019CV33-10ZXI CY7C1019CV33-10ZXA CY7C1019CV33-12VC CY7C1019CV33-12ZC CY7C1019CV33-12ZXC CY7C1019CV33-12VI CY7C1019CV33-12BVXI CY7C1019CV33-15VC CY7C1019CV33-15VXC CY7C1019CV33-15ZXC CY7C1019CV33-15ZXI

Package Diagrams

Package Diagram 51-85033 51-85095
51-85095 51-85033 51-85095
51-85033 51-85150 51-85033 51-85033 51-85095 51-85095

Package Type
32-pin 400-Mil Molded SOJ 32-pin TSOP II Pb-Free 32-pin TSOP II Pb-Free 32-pin TSOP II Pb-Free 32-pin 400-Mil Molded SOJ 32-pin TSOP II 32-pin TSOP II Pb-Free 32-pin 400-Mil Molded SOJ 48-ball VFBGA Pb-Free 32-pin 400-Mil Molded SOJ 32-pin 400-Mil Molded SOJ Pb-Free 32-pin TSOP II Pb-Free 32-pin TSOP II Pb-Free

Figure 32-pin 400-Mil Molded SOJ

CY7C1019CV33

Operating Range

Commercial Industrial

Automotive-A Commercial

Industrial Commercial

Industrial
51-85033-*B

Page 7 of 10 [+] Feedback

Figure 32-Pin TSOP II

CY7C1019CV33
51-85095-**

Page 8 of 10 [+] Feedback

CY7C1019CV33

TOP VIEW

A1 CORNER
12 3 4 5 6

A B C D E F G H

Figure 48-Ball VFBGA 6 x 8 x 1 mm

BOTTOM VIEW A1 CORNER

M C M C A B Ø0.30±0.05 48X
6 54 3 2 1

A B C D E F G H

B 0.15 4X

SEATING PLANE C
51-85150-*D

C MAX.

MAX.

Page 9 of 10 [+] Feedback

CY7C1019CV33

Document History Page

Document Title CY7C1019CV33 1 Mbit 128K x 8 Static RAM Document Number 38-05130

ECN NO.
Added lead-free parts in Ordering Information Table
Replaced Package Name column with Package Diagram in the Ordering

Information Table
493543

See ECN

NXR Removed 8 ns speed bin from Product offering

Added note #1 on page #2

Changed the description of IIX from Input Load Current to Input Leakage Current in DC Electrical Characteristics table
Removed IOS parameter from DC Electrical Characteristics table Updated Ordering Information
2761448 09/09/2009

VKN Included Automotive-A information

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at cypress.com/sales.

Products PSoC Clocks & Buffers Wireless Memories Image Sensors
psoc.cypress.com clocks.cypress.com wireless.cypress.com memory.cypress.com image.cypress.com

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

All products and company names mentioned in this document may be the trademarks of their respective holders.

Page 10 of 10
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY7C1019CV33-10ZXIT Datasheet file may be downloaded here without warranties.

Datasheet ID: CY7C1019CV33-10ZXIT 507884