CY3097

CY3097 Datasheet

CY3670

Part	Datasheet
CY3097	CY3097 (pdf)

Related Parts	Information
CY3093	CY3093
CY3098	CY3098
CY3670	CY3670

PDF Datasheet Preview
CY3670 FTG Programming Kit Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone USA Phone Intnl : [+] Feedback Copyrights Copyrights Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. Microsoft and Windows are registered trademarks of Microsoft Corporation. CyClocks and CyberClocks are trademarks of Cypress Semiconductor. All product and company names mentioned in this document are the trademarks of their respective holders. Flash Code Protection Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products. [+] Feedback Contents FTG Programming Kit Functional Description Kit Contents Setup 3 [+] Feedback Contents [+] Feedback FTG Programming Kit Functional Description The CY3670 FTG Programming Kit enables users with a PC to program Cypress EPROM FieldProgrammable Clock Generators quickly and easily. The two setup requirements are a power connection and a serial port connection with the PC, as shown in Figure Using CyberClocks software, users can configure their parts to the required specifications and generate the corresponding JEDEC file, which is used for programming. In addition, CyberClocks software provides PPM optimization and power calculations. The JEDEC file is loaded into the CY_FTG_V2 software that communicates with the programmer. The CY_FTG_V2 software also has blank-check capabilities and the ability to read, verify, and view the EPROM table from a programmed device. This procedure is shown in Figure Figure Programming Procedure CyberClocks CyClocks CY_FTG_V2 JEDEC File Device Specific Adapter Bit Stream through RS232 Serial Port Cypress FTG Programmer - CY3670 Programs CY2071AF/CY2291F/CY2292F/ CY2907F8/CY2907F14 ON Busy 5 [+] Feedback FTG Programming Kit • Supports multiple Cypress EPROM Field Programmable Clock Generators CY2291F, CY2292F SOIC only , CY2907F8, and CY2907F14 • Separate device specific socket adapters • Allows quick and easy prototyping • Compact design for portability • Easy to use interface Microsoft Windows • User friendly CyberClocks software for JEDEC file development Kit Contents • Programmer Unit • Serial Port Cable • AC/DC Adapter • CD containing CyClocks Software, CY_FTG_V2 Programmer Software, and data sheets for supported devices • Socket adapters are required and are available separately Setup Hardware The CY3670 FTG Programming Kit has a very simple setup procedure. As shown in Figure 1-2, the two connections are the power and the RS232 serial cable to the computer. The programmer must be connected to a PC through a serial port and must receive power through the included AC/DC adapter. The AC/DC adapter is connected to a standard 110 V/220 V wall outlet. The final step is to use the appropriate adapter for the device to be programmed. Figure 1-3 on page 7 is a close up of the socket and shows the correct orientation for placing the device in the socket. The device must be placed according to the device placement that appears on each adapter. The dots correspond to pin 1 of the device. Note When plugging the AC/DC adapter into an outlet, be sure to set the 110 V/220 V switch to the correct setting 110 V in the US as shown on the power adapter in Figure 1-2 on page If no switch exists, it automatically selects between 110 V and 220 V. [+] Feedback Figure FTG Programming Kit Setup FTG Programming Kit IBM Compatible 110V 220V AC/DC Adapter text Cypress FTG Programmer - CY3670 Programs CY2291F/CY2292F/ The CY3670 Kit does not include any socket adapters. The necessary adapters may be ordered from Cypress Semiconductor. To order an adapter, contact your local Cypress sales office or representative, or visit the online store at The section Ordering Information lists the available adapters and their corresponding devices. Electrical Characteristics Item Part Description Cypress FTG Programmer 2 Serial Cable 3 Power Adapter Cypress Part Number Characteristics CY3670 Voltage 12 VDC. Supports CY2292F, CY2291F, CY2907F8, and CY290714 through adapters purchased separately. UL approved standard 9 pin serial cable. RS232 one end male /other end female 80 C, 300V, VW-1, 28AWG, AWM I/II. Input 110 V/220 V AC, 60/50 Hz The CY3670 programmer draws from 100 to 150 mA. At this load, the adapter supplies 12 V, which is the required voltage. The rated Output: 9 V DC is specified for 1 A load This adapter does not have a voltage regulator. Ordering Information Be sure to check for CyberClocks updates at Ordering Code CY3670 CY3093 CY3095 CY3097 CY3098 Description FTG Programmer Kit Socket Adapter for CY2291F Socket Adapter for CY2292F SOIC package only Socket Adapter for CY2907F8 Socket Adapter for CY2907F14 [+] Feedback FTG Programming Kit PDF Creation 07/24/02 Origin of Change Description of Change CKN New Kit Change title from “CY3670 PTG Programming Kit” to “CY3670 FTG Programming Kit” for consistency Change document status from Preliminary to Final See ECN KVM/ AESA Remove references to socket adapter CY3099 and support for CY2292FZ TSSOP package Clarify that the CY3670 kit does not include any socket adapters Correct obsolete website URLs Correct software references previously referred to CyClocks but not CyberClocks 04/06/2010 Removed inactive part number CY3096 from the Ordering Information table. Updated Template. 02/05/2011 CXQ No technical updates. Documentation Conventions Table Document Conventions for Guides Convention Courier New Italics [Bracketed, Bold] File > Open Bold Times New Roman Text in gray boxes Usage Displays file locations, user entered text, and source code: Displays file names and reference documentation Read about the sourcefile.hex file in the PSoC Designer User Guide. Displays keyboard commands in procedures [Enter] or [Ctrl] [C] Represents menu paths File > Open > New Project Displays commands, menu paths, and icon names in procedures Click the File icon and then click Open. Displays an equation 2+2=4 Describes Cautions or unique functionality of the product. 9 [+] Feedback FTG Programming Kit [+] Feedback

PDF Datasheet Preview

CY3670

FTG Programming Kit

Cypress Semiconductor 198 Champion Court

San Jose, CA 95134-1709 Phone USA Phone Intnl :
[+] Feedback

Copyrights

Copyrights

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

Microsoft and Windows are registered trademarks of Microsoft Corporation. CyClocks and CyberClocks are trademarks of Cypress Semiconductor. All product and company names mentioned in this document are the trademarks of their respective holders.

Flash Code Protection

Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."

Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products.
[+] Feedback

Contents

FTG Programming Kit

Functional Description Kit Contents Setup
3 [+] Feedback

Contents
[+] Feedback

FTG Programming Kit

Functional Description

The CY3670 FTG Programming Kit enables users with a PC to program Cypress EPROM FieldProgrammable Clock Generators quickly and easily. The two setup requirements are a power connection and a serial port connection with the PC, as shown in Figure

Using CyberClocks software, users can configure their parts to the required specifications and generate the corresponding JEDEC file, which is used for programming.

In addition, CyberClocks software provides PPM optimization and power calculations.

The JEDEC file is loaded into the CY_FTG_V2 software that communicates with the programmer. The CY_FTG_V2 software also has blank-check capabilities and the ability to read, verify, and view the EPROM table from a programmed device. This procedure is shown in Figure

Figure Programming Procedure

CyberClocks CyClocks

CY_FTG_V2

JEDEC File

Device Specific Adapter

Bit Stream through RS232 Serial Port

Cypress FTG Programmer - CY3670 Programs CY2071AF/CY2291F/CY2292F/

CY2907F8/CY2907F14

ON Busy
5 [+] Feedback

FTG Programming Kit
• Supports multiple Cypress EPROM Field Programmable Clock Generators CY2291F, CY2292F SOIC only , CY2907F8, and CY2907F14
• Separate device specific socket adapters
• Allows quick and easy prototyping
• Compact design for portability
• Easy to use interface Microsoft Windows
• User friendly CyberClocks software for JEDEC file development

Kit Contents
• Programmer Unit
• Serial Port Cable
• AC/DC Adapter
• CD containing CyClocks Software, CY_FTG_V2 Programmer Software, and data sheets for
supported devices
• Socket adapters are required and are available separately

Setup

Hardware

The CY3670 FTG Programming Kit has a very simple setup procedure. As shown in Figure 1-2, the two connections are the power and the RS232 serial cable to the computer. The programmer must be connected to a PC through a serial port and must receive power through the included AC/DC adapter. The AC/DC adapter is connected to a standard 110 V/220 V wall outlet. The final step is to use the appropriate adapter for the device to be programmed.

Figure 1-3 on page 7 is a close up of the socket and shows the correct orientation for placing the device in the socket. The device must be placed according to the device placement that appears on each adapter. The dots correspond to pin 1 of the device.

Note When plugging the AC/DC adapter into an outlet, be sure to set the 110 V/220 V switch to the correct setting 110 V in the US as shown on the power adapter in Figure 1-2 on page If no switch exists, it automatically selects between 110 V and 220 V.
[+] Feedback

Figure FTG Programming Kit Setup

FTG Programming Kit

IBM Compatible
110V
220V

AC/DC

Adapter
text

Cypress FTG Programmer - CY3670 Programs CY2291F/CY2292F/
The CY3670 Kit does not include any socket adapters. The necessary adapters may be ordered from Cypress Semiconductor. To order an adapter, contact your local Cypress sales office or representative, or visit the online store at The section Ordering Information lists the available adapters and their corresponding devices.

Electrical Characteristics

Item

Part Description

Cypress FTG Programmer
2 Serial Cable
3 Power Adapter

Cypress Part Number

Characteristics

CY3670

Voltage 12 VDC. Supports CY2292F, CY2291F, CY2907F8, and CY290714 through adapters purchased separately.

UL approved standard 9 pin serial cable. RS232 one end male /other end female 80 C, 300V, VW-1, 28AWG, AWM I/II.

Input 110 V/220 V AC, 60/50 Hz

The CY3670 programmer draws from 100 to 150 mA. At this load, the
adapter supplies 12 V, which is the required voltage. The rated Output:
9 V DC is specified for 1 A load This adapter does not have a voltage
regulator.
Ordering Information

Be sure to check for CyberClocks updates at
Ordering Code CY3670 CY3093 CY3095 CY3097 CY3098

Description FTG Programmer Kit Socket Adapter for CY2291F Socket Adapter for CY2292F SOIC package only Socket Adapter for CY2907F8 Socket Adapter for CY2907F14
[+] Feedback

FTG Programming Kit

PDF Creation
07/24/02

Origin of

Change

Description of Change

CKN New Kit

Change title from “CY3670 PTG Programming Kit” to “CY3670 FTG Programming Kit” for consistency

Change document status from Preliminary to Final

See ECN

KVM/ AESA

Remove references to socket adapter CY3099 and support for CY2292FZ TSSOP package

Clarify that the CY3670 kit does not include any socket adapters

Correct obsolete website URLs

Correct software references previously referred to CyClocks but not CyberClocks
04/06/2010
Removed inactive part number CY3096 from the Ordering Information table. Updated Template.
02/05/2011 CXQ No technical updates.

Documentation Conventions

Table Document Conventions for Guides

Convention Courier New Italics [Bracketed, Bold] File > Open Bold Times New Roman Text in gray boxes

Usage

Displays file locations, user entered text, and source code:

Displays file names and reference documentation Read about the sourcefile.hex file in the PSoC Designer User Guide.

Displays keyboard commands in procedures [Enter] or [Ctrl] [C]

Represents menu paths File > Open > New Project

Displays commands, menu paths, and icon names in procedures Click the File icon and then click Open.

Displays an equation 2+2=4

Describes Cautions or unique functionality of the product.
9 [+] Feedback

FTG Programming Kit
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY3097 Datasheet file may be downloaded here without warranties.

Datasheet ID: CY3097 507789