CY2V014FLXCT

CY2V014FLXCT Datasheet

CY2V014

Part	Datasheet
CY2V014FLXCT	CY2V014FLXCT (pdf)

Related Parts	Information
CY2V014FLXIT	CY2V014FLXIT

PDF Datasheet Preview
• High-frequency VCXO with LVPECL output • Any output frequency from 50 MHz to 690 MHz • Available either factory configured or field programmable • Integrated phase-locked loop PLL • 1 ps typical RMS Phase Jitter • Output Enable or Power-down function • Supply voltage V or V • Pb-free package x mm LCC • Commercial and industrial temperature ranges Logic Block Diagram CY2V014 LVPECL Voltage Controlled Crystal Oscillator VCXO • Eliminates the need for external crystal • Low-noise internal PLL • Fast time to market • Suitable for HDDs, consumer and networking applications • Small footprint • Application compatibility in standard and low-power systems • Field-programmable for reduced inventory Crystal Oscillator Low Noise PLL 1 VIN 2 OE/PD# Pull-up PROGRAMMABLE CONFIGURATION 6 VDD 3 VSS OUTPUT DIVIDER 4 CLK 5 CLK# • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CY2V014 Pinouts Figure 6-Pin Ceramic LCC VIN 1 OE/PD# 2 VSS 3 6 VDD 5 CLK# 4 CLK Pin Definitions Pin 1 2 Name VIN OE/PD# CLK, CLK# I/O Type Analog Input CMOS Input, internal pull-up Power Output Power Description VCXO control voltage. Positive slope. Output Enable pin Active HIGH. If OE = 1, CLK is enabled. Power-down pin Active LOW. If PD# = 0, Power-down is enabled. The functionality of this pin is programmable. Power supply ground Clock output. LVPECL outputs. CLK# is the complement of CLK. Positive power supply V or V Functional Description The CY2V014 is a high-performance high-frequency voltage-controlled crystal oscillator VCXO . The device uses a Cypress proprietary low-noise PLL to synthesize the frequency from an embedded crystal. The output frequency is user adjustable by means of an analog control voltage applied to the VIN pin. VCXO Control Voltage VIN, pin 1 VIN is an analog input that is used to adjust the output frequency. The nominal output frequency is defined when VIN = VDD/2. Increasing the voltage on VIN increases the output frequency, while decreasing the voltage on VIN decreases the output frequency. Any voltage between VSS and VDD is allowed on VIN. The voltage/frequency slope is very linear over most of the control voltage range. Programming Description Field-Programmable CY2V014 Field-programmable devices are shipped unprogrammed, and must be programmed before use. Customers can use CyberClocks Online Software to specify the device configuration and generate a .JED programming file. Programming of samples and prototype quantities is available using the CY3672 programmer. Third-party vendors manufacture programmers for small to large volume applications. Cypress’s value-added distribution partners also provide programming services. Field-programmable devices are designated with an “F” in the part number, and are intended for quick prototyping and inventory reduction. Ordering Information Table 1 lists the CY2V014 key package features and ordering codes. The table contains only the parts that are currently available. If you do not see what you are looking for, contact your local sales representative. For more information, visit the Cypress website at and refer to the product summary page at Table Key Features and Ordering Information Configuration Package description Pb-free CY2V014FLXCT CY2V014FLXIT Field programmable 6-Pin Ceramic LCC SMD Tape and Reel Field programmable 6-Pin Ceramic LCC SMD Tape and Reel Product Flow Commercial, 0 °C to 70 °C Industrial, °C to 85 °C Possible Configurations Some product offerings are factory programmed customer specific devices with customized part numbers. The Possible Configurations table shows the available device types, but not complete part numbers. Contact your local Cypress FAE of Sales Representative for more information. Part Number[3] Configuration Package description Product Flow Pb-free CY2V014LXCxxxT Factory configured 6-Pin Ceramic LCC SMD Tape and Reel Commercial, 0 °C to 70 °C CY2V014LXIxxxT Factory configured 6-Pin Ceramic LCC SMD Tape and Reel Industrial, °C to 85 °C Ordering Code Defintions CY 2V014 F LX C xxx T Tape and Reel Custom configuration specific code for factory programmed devices Temperature range C = Commercial I = Industrial Pb-free LCC package Field programmable device Base part number Company ID CY = Cypress Note “xxx” is a factory assigned code that identifies the programming option. Page 6 of 9 [+] Feedback Package Diagram Figure 6-Pin x mm Ceramic LCC LZ06A CY2V014 Acronyms Table Acronyms Used in this Document Acronym CMOS ESD FAE HDD LCC PLL RMS SMD VCXO Description complementary metal oxide semiconductor electro-static discharge field applications engineer hard disk drive leadless chip carrier phase-locked loop root mean square surface mount device voltage-controlled crystal oscillator 001-10044 *A Document Conventions Units of Measure Table Units of Measure Unit of Measure degree celcius KHz KΩ MHz kilo hertz kilo ohm mega hertz micro ampere milli ampere milli second milli volt nano second parts per million percent pico second volt Page 7 of 9 [+] Feedback CY2V014 Document History Page Document Title CY2V014 LVPECL Voltage Controlled Crystal Oscillator VCXO Document Number 001-06458 Orig. of Submission Change Description of Change 504458 See ECN New data sheet 2899939 CXQ 03/26/10 Updated ordering information table. Updated package diagram. Updated copyright section. 3099970 CXQ 12/02/10 Updated template and styles. Changed from Preliminary to Final. Added Acronyms, Units of Measure, and Ordering Code Definitions sections. Changed 700 MHz to 690 MHz in second “Features” bullet. Changed from 700 MHz to 690 MHz in “Programming Variables” section Changed fOUT spec in AC specifications table from 700 max to 690 max. Changed FSfact in AC specifications from ppm max to min and 60 ppm max. Changed FSfield spec to ppm min and 100 ppm max. Page 8 of 9 [+] Feedback CY2V014 Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. Products Automotive Clocks & Buffers Interface Lighting & Power Control Memory Optical & Image Sensing PSoC Touch Sensing USB Controllers Wireless/RF cypress.com/go/automotive cypress.com/go/clocks cypress.com/go/interface cypress.com/go/powerpsoc cypress.com/go/plc cypress.com/go/memory cypress.com/go/image cypress.com/go/psoc cypress.com/go/touch cypress.com/go/USB cypress.com/go/wireless PSoC Solutions psoc.cypress.com/solutions PSoC 1 \| PSoC 3 \| PSoC 5 Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. Page 9 of 9 CyberClocks is a trademark of Cypress Semiconductor Corporation. All other products and company names mentioned in this document may be the trademarks of their respective holders. [+] Feedback

PDF Datasheet Preview

• High-frequency VCXO with LVPECL output
• Any output frequency from 50 MHz to 690 MHz
• Available either factory configured or field programmable
• Integrated phase-locked loop PLL
• 1 ps typical RMS Phase Jitter
• Output Enable or Power-down function
• Supply voltage V or V
• Pb-free package x mm LCC
• Commercial and industrial temperature ranges

Logic Block Diagram

CY2V014

LVPECL Voltage Controlled Crystal Oscillator VCXO
• Eliminates the need for external crystal
• Low-noise internal PLL
• Fast time to market
• Suitable for HDDs, consumer and networking applications
• Small footprint
• Application compatibility in standard and low-power systems
• Field-programmable for reduced inventory

Crystal Oscillator

Low Noise PLL
1 VIN
2 OE/PD#

Pull-up

PROGRAMMABLE CONFIGURATION
6 VDD
3 VSS

OUTPUT DIVIDER
4 CLK
5 CLK#
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CY2V014

Pinouts

Figure 6-Pin Ceramic LCC

VIN 1 OE/PD# 2

VSS 3
6 VDD 5 CLK# 4 CLK

Pin Definitions

Pin 1 2

Name VIN OE/PD#

CLK, CLK#

I/O Type Analog Input CMOS Input, internal pull-up

Power Output Power

Description VCXO control voltage. Positive slope.

Output Enable pin Active HIGH. If OE = 1, CLK is enabled. Power-down pin Active LOW. If PD# = 0, Power-down is enabled. The functionality of this pin is programmable. Power supply ground

Clock output. LVPECL outputs. CLK# is the complement of CLK. Positive power supply V or V

Functional Description

The CY2V014 is a high-performance high-frequency voltage-controlled crystal oscillator VCXO .

The device uses a Cypress proprietary low-noise PLL to synthesize the frequency from an embedded crystal.

The output frequency is user adjustable by means of an analog control voltage applied to the VIN pin.

VCXO Control Voltage VIN, pin 1 VIN is an analog input that is used to adjust the output frequency. The nominal output frequency is defined when VIN = VDD/2. Increasing the voltage on VIN increases the output frequency, while decreasing the voltage on VIN decreases the output frequency. Any voltage between VSS and VDD is allowed on VIN. The voltage/frequency slope is very linear over most of the control voltage range.

Programming Description

Field-Programmable CY2V014

Field-programmable devices are shipped unprogrammed, and must be programmed before use. Customers can use CyberClocks Online Software to specify the device configuration and generate a .JED programming file. Programming of samples and prototype quantities is available using the CY3672 programmer. Third-party vendors manufacture programmers for small to large volume applications. Cypress’s value-added distribution partners also provide programming services. Field-programmable devices are designated with an “F” in the part number, and are intended for quick prototyping and inventory reduction.
Ordering Information
Table 1 lists the CY2V014 key package features and ordering codes. The table contains only the parts that are currently available. If you do not see what you are looking for, contact your local sales representative. For more information, visit the Cypress website at and refer to the product summary page at
Table Key Features and Ordering Information

Configuration

Package description

Pb-free CY2V014FLXCT CY2V014FLXIT

Field programmable 6-Pin Ceramic LCC SMD Tape and Reel Field programmable 6-Pin Ceramic LCC SMD Tape and Reel

Product Flow

Commercial, 0 °C to 70 °C Industrial, °C to 85 °C

Possible Configurations

Some product offerings are factory programmed customer specific devices with customized part numbers. The Possible Configurations table shows the available device types, but not complete part numbers. Contact your local Cypress FAE of Sales Representative for more information.

Part Number[3]

Configuration

Package description

Product Flow

Pb-free

CY2V014LXCxxxT

Factory configured 6-Pin Ceramic LCC SMD Tape and Reel

Commercial, 0 °C to 70 °C

CY2V014LXIxxxT

Factory configured 6-Pin Ceramic LCC SMD Tape and Reel

Industrial, °C to 85 °C
Ordering Code Defintions

CY 2V014 F LX C xxx T

Tape and Reel

Custom configuration specific code for factory programmed devices

Temperature range C = Commercial I = Industrial Pb-free LCC package Field programmable device Base part number Company ID CY = Cypress

Note “xxx” is a factory assigned code that identifies the programming option.

Page 6 of 9 [+] Feedback

Package Diagram

Figure 6-Pin x mm Ceramic LCC LZ06A

CY2V014

Acronyms

Table Acronyms Used in this Document

Acronym CMOS ESD FAE HDD LCC PLL RMS SMD VCXO

Description complementary metal oxide semiconductor electro-static discharge field applications engineer hard disk drive leadless chip carrier phase-locked loop root mean square surface mount device voltage-controlled crystal oscillator
001-10044 *A

Document Conventions

Units of Measure

Table Units of Measure

Unit of Measure
degree celcius

KHz KΩ MHz
kilo hertz kilo ohm mega hertz
micro ampere
milli ampere
milli second
milli volt
nano second
parts per million
percent
pico second
volt

Page 7 of 9 [+] Feedback

CY2V014

Document History Page

Document Title CY2V014 LVPECL Voltage Controlled Crystal Oscillator VCXO Document Number 001-06458

Orig. of Submission

Change

Description of Change
504458

See ECN New data sheet
2899939 CXQ
03/26/10 Updated ordering information table.

Updated package diagram.

Updated copyright section.
3099970 CXQ
12/02/10 Updated template and styles.

Changed from Preliminary to Final.
Added Acronyms, Units of Measure, and Ordering Code Definitions
sections.

Changed 700 MHz to 690 MHz in second “Features” bullet.

Changed from 700 MHz to 690 MHz in “Programming Variables” section

Changed fOUT spec in AC specifications table from 700 max to 690 max.

Changed FSfact in AC specifications from ppm max to min
and 60 ppm max.

Changed FSfield spec to ppm min and 100 ppm max.

Page 8 of 9 [+] Feedback

CY2V014

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations.

Products Automotive Clocks & Buffers Interface Lighting & Power Control

Memory Optical & Image Sensing PSoC Touch Sensing USB Controllers Wireless/RF
cypress.com/go/automotive cypress.com/go/clocks
cypress.com/go/interface cypress.com/go/powerpsoc
cypress.com/go/plc cypress.com/go/memory
cypress.com/go/image cypress.com/go/psoc cypress.com/go/touch cypress.com/go/USB
cypress.com/go/wireless

PSoC Solutions psoc.cypress.com/solutions PSoC 1 | PSoC 3 | PSoC 5

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

Page 9 of 9

CyberClocks is a trademark of Cypress Semiconductor Corporation. All other products and company names mentioned in this document may be the trademarks of their respective holders.
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY2V014FLXCT Datasheet file may be downloaded here without warranties.

Datasheet ID: CY2V014FLXCT 507753