CY2CC810OXC

CY2CC810OXC Datasheet

CY2CC810

Part	Datasheet
CY2CC810OXC	CY2CC810OXC (pdf)

Related Parts	Information
CY2CC810OXCT	CY2CC810OXCT

PDF Datasheet Preview
CY2CC810 1:10 Clock Fanout Buffer • Low-voltage operation • VDD range from 2.5V to 3.3V • 1:10 fanout • Over voltage tolerant input hot swappable • Drives either a 50-Ohm or 75-Ohm transmission line • Low-input capacitance • 250 ps typical output-to-output skew • 19 ps typical DJ jitter • Typical propagation delay < ns • High-speed operation > 500 MHz • Industrial versions available • Available packages include SOIC, SSOP Block Diagram IN INPUT Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 OUTPUT AVCMOS The Cypress series of network circuits are produced using advanced 0.35-micron CMOS technology, achieving the industry’s fastest logic and buffers. The Cypress CY2CC810 fanout buffer features one input and ten outputs. Designed for data communications clock management applications, the large fanout from a single input reduces loading on the input clock. AVCMOS-type outputs dynamically adjust for variable impedance matching and reduce noise overall. Pin Configuration GND 2 Q1 3 VDD 4 Q2 5 GND 6 Q3 7 VDD 8 Q4 9 GND 10 CY2CC810 20 VDD 19 Q10 18 Q9 17 GND 16 Q8 15 VDD 14 Q7 13 GND 12 Q6 11 Q5 20 pin SOIC/SSOP Pin Description Pin Number 1 2, 6, 10, 13, 17 4, 8, 15, 20 3, 5, 7, 9, 11, 12, 14, 16, 18, 19 Pin Name IN GND VDD Q1... Q10 Input LVCMOS Ground Power Power Supply Power Output AVCMOS • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CY2CC810 Absolute Maximum Conditions[1, 2] Parameter VDD VIN VOUT TS TA VDD Ground Supply voltage Input Supply Voltage to Ground Potential Output Supply Voltage to Ground Potential Temperature, Storage Temperature, Operating Ambient Power Dissipation Min. Max. VDD +1 150 Unit V °C °C W Ordering Information Part Number CY2CC810OI CY2CC810OIT CY2CC810OC CY2CC810OCT Lead-free CY2CC810OXC CY2CC810OXCT CY2CC810OXI CY2CC810OXIT Package Type 20-pin SSOP 20-pin and Reel 20-pin SSOP 20-pin and Reel 20-pin SSOP 20-pin and Reel 20-pin SSOP 20-pin and Reel Product Flow Industrial, to 85°C Industrial, to 85°C Commercial, 0°C to 70°C Commercial, 0°C to 70°C Commercial, 0°C to 70°C Commercial, 0°C to 70°C Industrial, to 85°C Industrial, to 85°C Package Drawing and Dimensions Figure 20-Lead 300-Mil SOIC S20.3/SZ20.3 PIN 1 ID NOTE JEDEC STD REF MO-119 BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH,BUT DOES INCLUDE MOLD MISMATCH AND ARE MEASURED AT THE MOLD PARTING LINE. MOLD PROTRUSION/END FLASH SHALL NOT EXCEED in mm PER SIDE DIMENSIONS IN INCHES PACKAGE WEIGHT 0.55gms MIN. MAX. TYP. SEATING PLANE PART # S20.3 STANDARD PKG. SZ20.3 LEAD FREE PKG. 51-85024-C Page 7 of 9 [+] Feedback Figure 20-lead 5.3-mm Shrunk Small Outline Package O20 CY2CC810 All product and company names mentioned in this document are the trademarks of their respective holders. 51-85077-C Page 8 of 9 Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. [+] Feedback CY2CC810 Document History Page Document Title CY2CC810 1:10 Clock Fanout Buffer Document # 38-07056 ECN NO. Issue Date Orig. of Change Description of Change 107081 06/07/01 IKA Convert from IMI to Cypress 114315 05/09/02 TSM IDD Validation 119117 10/07/02 RGL Added as the Max. value of VIH in the DC Electrical Characteristics table. Changed the Max. value of VIH from to in the DC Electrical Characteristics table. 122743 12/14/02 RBI Added power up requirements to maximum ratings information.

PDF Datasheet Preview

CY2CC810
1:10 Clock Fanout Buffer
• Low-voltage operation
• VDD range from 2.5V to 3.3V
• 1:10 fanout
• Over voltage tolerant input hot swappable
• Drives either a 50-Ohm or 75-Ohm transmission line
• Low-input capacitance
• 250 ps typical output-to-output skew
• 19 ps typical DJ jitter
• Typical propagation delay < ns
• High-speed operation > 500 MHz
• Industrial versions available
• Available packages include SOIC, SSOP

Block Diagram

IN INPUT

Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 OUTPUT AVCMOS

The Cypress series of network circuits are produced using advanced 0.35-micron CMOS technology, achieving the industry’s fastest logic and buffers.

The Cypress CY2CC810 fanout buffer features one input and ten outputs. Designed for data communications clock management applications, the large fanout from a single input reduces loading on the input clock.

AVCMOS-type outputs dynamically adjust for variable impedance matching and reduce noise overall.

Pin Configuration

GND 2

Q1 3 VDD 4

Q2 5 GND 6

Q3 7 VDD 8

Q4 9 GND 10

CY2CC810
20 VDD 19 Q10 18 Q9 17 GND 16 Q8 15 VDD 14 Q7 13 GND 12 Q6 11 Q5
20 pin SOIC/SSOP

Pin Description

Pin Number 1 2, 6, 10, 13, 17 4, 8, 15, 20 3, 5, 7, 9, 11, 12, 14, 16, 18, 19

Pin Name IN

GND VDD Q1... Q10

Input

LVCMOS

Ground

Power

Power Supply

Power

Output

AVCMOS
• 198 Champion Court
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CY2CC810

Absolute Maximum Conditions[1, 2]

Parameter

VDD VIN VOUT TS TA

VDD Ground Supply voltage Input Supply Voltage to Ground Potential Output Supply Voltage to Ground Potential Temperature, Storage Temperature, Operating Ambient Power Dissipation

Min.

Max.

VDD +1 150

Unit V °C °C W
Ordering Information

Part Number CY2CC810OI CY2CC810OIT CY2CC810OC CY2CC810OCT Lead-free CY2CC810OXC CY2CC810OXCT CY2CC810OXI CY2CC810OXIT

Package Type 20-pin SSOP 20-pin and Reel 20-pin SSOP 20-pin and Reel
20-pin SSOP 20-pin and Reel 20-pin SSOP 20-pin and Reel

Product Flow Industrial, to 85°C Industrial, to 85°C Commercial, 0°C to 70°C Commercial, 0°C to 70°C

Commercial, 0°C to 70°C Commercial, 0°C to 70°C Industrial, to 85°C Industrial, to 85°C

Package Drawing and Dimensions

Figure 20-Lead 300-Mil SOIC S20.3/SZ20.3

PIN 1 ID

NOTE JEDEC STD REF MO-119 BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH,BUT

DOES INCLUDE MOLD MISMATCH AND ARE MEASURED AT THE MOLD PARTING LINE. MOLD PROTRUSION/END FLASH SHALL NOT EXCEED in mm PER SIDE

DIMENSIONS IN INCHES PACKAGE WEIGHT 0.55gms

MIN. MAX.

TYP.

SEATING PLANE

PART # S20.3 STANDARD PKG. SZ20.3 LEAD FREE PKG.
51-85024-*C

Page 7 of 9 [+] Feedback

Figure 20-lead 5.3-mm Shrunk Small Outline Package O20

CY2CC810

All product and company names mentioned in this document are the trademarks of their respective holders.
51-85077-*C

Page 8 of 9

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
[+] Feedback

CY2CC810

Document History Page

Document Title CY2CC810 1:10 Clock Fanout Buffer Document # 38-07056

ECN NO. Issue Date

Orig. of Change

Description of Change
107081 06/07/01

IKA Convert from IMI to Cypress
114315 05/09/02

TSM IDD Validation
119117 10/07/02

RGL Added as the Max. value of VIH in the DC Electrical Characteristics
table.

Changed the Max. value of VIH from to in the DC Electrical Characteristics table.
122743 12/14/02

RBI Added power up requirements to maximum ratings information.

More datasheets: 423-2ASUGC/S400-A6 | EAHP5630WA4 | AS1360-33-T | AS1360-21-T | AS1360-18-T | AS1360-25-T | AS1360-50-T | AS1360-40-T | AS1360-30-T | AS1360-33_EK_ST

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY2CC810OXC Datasheet file may be downloaded here without warranties.

Datasheet ID: CY2CC810OXC 507747