CTS100LVEL33TG

CTS100LVEL33TG Datasheet

CTS100LVEL33

Part	Datasheet
CTS100LVEL33TG	CTS100LVEL33TG (pdf)

Related Parts	Information
CTS100LVEL33DG	CTS100LVEL33DG
CTS100LVEL33NG	CTS100LVEL33NG

PDF Datasheet Preview
CTS100LVEL33 LVPECL Divide by 4 Divider MLP8, MSOP8, SOIC8 Not recommended for new designs  GHz Toggle Frequency  470ps Propagation Delay  Internal Input Pull-down Resistors  3.0V to 5.5V Power Supply  RoHS Compliant Pb Free Packages BLOCK DIAGRAM The CTS100LVEL33 is an integrated ÷4 divider. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random logic state the reset allows for the synchronization of multiple CTS100LVEL33’s in a system. The CTS100LVEL33 is a direct replacement for the On Semiconductor MC100EL/LVEL33. ENGINEERING NOTES The CTS100LVEL33 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the differential input pair. The input signal is then fed to the other input. The VBB pin should be used only as a bias for the CTS100LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a capacitor. Figure 1 - Timing Diagram North Americas +1-800-757-6686 • International +1-508-435-6831 • Asia +65-655-17551 • Specifications are subject to change without notice 1 CTS100LVEL33 LVPECL Divide by 4 Divider MLP8, MSOP8, SOIC8 Not recommended for new designs Figure 2 - Typical Large Signal Output Swing Measured with 750mV input, output terminated to VCC-2V via resistors. ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings are those values beyond which device life may be impaired. Characteristic Condition Rating Unit VCC VI_PECL VEE VI_ECL IOUT PECL Power Supply PECL Input Voltage ECL Power Supply ECL Input Supply Output Current VEE = 0V VEE = 0V VCC = 0V VCC = 0V Continuous Surge 0 to + V 0 to + V TA TSTG ESDHBM ESDMM ESDCDM Operating Temperature Range Storage Temperature Range Human Body Model Electro Static Discharge Machine Model Electro Static Discharge Charged Device Model Electro Static Discharge -40 to +85 °C -65 to +150 °C 2500 2000 North Americas +1-800-757-6686 • International +1-508-435-6831 • Asia +65-655-17551 • PART ORDERING INFORMATION Part Number CTS100LVEL33NG CTS100LVEL33TG CTS100LVEL33DG Package MLP8 MSOP8 SOIC8 Marking C3G / YWW HL33G / YYWW CTS100G / LVEL33 / YYWW North Americas +1-800-757-6686 • International +1-508-435-6831 • Asia +65-655-17551 • Specifications are subject to change without notice 7

PDF Datasheet Preview

CTS100LVEL33

LVPECL Divide by 4 Divider

MLP8, MSOP8, SOIC8

Not recommended for new designs
 GHz Toggle Frequency  470ps Propagation Delay
 Internal Input Pull-down Resistors
 3.0V to 5.5V Power Supply  RoHS Compliant Pb Free Packages

BLOCK DIAGRAM

The CTS100LVEL33 is an integrated ÷4 divider. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random logic state the reset allows for the synchronization of multiple CTS100LVEL33’s in a system.

The CTS100LVEL33 is a direct replacement for the On Semiconductor MC100EL/LVEL33.

ENGINEERING NOTES

The CTS100LVEL33 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the differential input pair. The input signal is then fed to the other input. The VBB pin should be used only as a bias for the CTS100LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a capacitor.

Figure 1 - Timing Diagram

North Americas +1-800-757-6686
• International +1-508-435-6831
• Asia +65-655-17551
•

Specifications are subject to change without notice 1

CTS100LVEL33

LVPECL Divide by 4 Divider

MLP8, MSOP8, SOIC8

Not recommended for new designs

Figure 2 - Typical Large Signal Output Swing Measured with 750mV input, output terminated to VCC-2V via resistors.

ELECTRICAL SPECIFICATIONS

Absolute Maximum Ratings are those values beyond which device life may be impaired.

Characteristic

Condition

Rating Unit

VCC VI_PECL

VEE VI_ECL

IOUT

PECL Power Supply PECL Input Voltage ECL Power Supply ECL Input Supply

Output Current

VEE = 0V VEE = 0V VCC = 0V VCC = 0V Continuous

Surge
0 to + V
0 to + V

TA TSTG ESDHBM ESDMM ESDCDM

Operating Temperature Range Storage Temperature Range Human Body Model Electro Static Discharge Machine Model Electro Static Discharge Charged Device Model Electro Static Discharge
-40 to +85 °C
-65 to +150 °C
2500
2000

North Americas +1-800-757-6686
• International +1-508-435-6831
• Asia +65-655-17551
•
PART ORDERING INFORMATION

Part Number CTS100LVEL33NG CTS100LVEL33TG CTS100LVEL33DG

Package MLP8 MSOP8 SOIC8

Marking C3G / YWW HL33G / YYWW CTS100G / LVEL33 / YYWW

North Americas +1-800-757-6686
• International +1-508-435-6831
• Asia +65-655-17551
•

Specifications are subject to change without notice 7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CTS100LVEL33TG Datasheet file may be downloaded here without warranties.

Datasheet ID: CTS100LVEL33TG 507346