450D502KSD5

450D502KSD5 Datasheet

Series 450 Stock Pot

Part	Datasheet
450D502KSD5	450D502KSD5 (pdf)

Related Parts	Information
450D252KSD5	450D252KSD5
450D104KSD5	450D104KSD5
450D503F8	450D503F8
450D503KSD5	450D503KSD5
450D253KSD5	450D253KSD5
450D103KSD5	450D103KSD5
450D502F8	450D502F8
450D104F8	450D104F8
450D252F8	450D252F8
450D253F8	450D253F8
450D102F8	450D102F8
450D102KSD5	450D102KSD5
450D501F8	450D501F8
450D501KSD5	450D501KSD5
450TD503BM6	450TD503BM6
450TD253BM6	450TD253BM6
450D504F8	450D504F8
450D504KSD5	450D504KSD5
450D103F8	450D103F8
450D254KSD5	450D254KSD5
450D254F8	450D254F8

PDF Datasheet Preview
Series 450 Stock Pot Industrial 15/16" 24mm diameter 1/2 watt composition variable resistor The CTS 450 Stock Pot Program provides immediate off-the-shelf availability from select CTS distributors. The program offers a choice of 11 of the most commonly used resistance values, linear or 10% logarithmic tapers and 17 popular plug in shafts which can be quickly assembled. • Off-the-shelf availability • Choice of linear or 10% logarithmic tapers • Wide resistance range • ±20% resistance tolerance • Available with four shaft styles knurled and slotted, flatted or round, with a wide selection of lengths and styles. Generally eliminates the need for cutting or modification. • Economical even in limited volume applications • Supplied with mounting hardware Electrical and Mechanical Specifications Resistance Range 500 ohms through 1 Megohm Resistance Tolerance Standard ±20% Power Rating, Watts Through 10K ohms, 1/2 watt above 100K ohms through 100K ohms, 1/3 watt above 100K ohms, 1/4 watt Voltage Rating Bushing to terminals High pot test, one minute 1080 VAC Operating maximum 750 VDC Angle of Rotation Total Rotation 300 degrees, ±5º Effective Rotation approximately 300 degrees Bushing Information Material diecast zinc Diameter EIA std. 3/8 32 UNEF-2A thread Length 3/8" ±1/64" 9.53mm ± 0.39mm Available with 3/8" 32 UNEF-2A thread only Terminal Information Solder lug, PC formed to rear Locating Lug Left side, terminals down Shaft Information Diameter 6.35mm Optional Switch SPST rotary switch 050 is available with limited shaft and resistance options. See ordering information. Technical Data Sheet 1448C Technical Data Sheet 1450SPB CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS CTS Type 450 Stock Pot MM DIMENSION: INCH Plug In Shafts Popular shaft styles are available with trim selections including screwdriver slot wide x or 1.19mm x 1.60mm , flat molded shaft flat is.156" wide x long or 3.96mm x 12.7mm, brass shaft flat is x or 9.53mm x 3.69mm , knurled and slotted diameter over knurl molded is - or - mm, brass is - or - mm , or full round. See trim selections and shaft details in chart below. Ordering Information 450 T A103 E M4 S TERMINAL STYLE T SOLDER LUG V PC FORMED TO REAR RESISTANCE OHMS 500 1K 2.5K 10K 25K 50K 100K 250K 500K 1M LOG A TAPER A102 A252 A502 A103 A253 A503 A104 A254 A504 A105 LINEAR D TAPER D501 D102 D252 D502 D103 D253 D503 D104 D254 D504 D105 MOUNTING STYLE B 3/8” DIECAST BUSHING E EAR MOUNT SWITCH BLANK NO SWITCH S SPST Rotary 050 Switch is supplied with an assembled molded shaft. Shaft Option M5 Only SHAFT OPTIONS BRASS MOLDED B1 - 5/8” SD Slot B2 - 3/4” SD Slot B3 - 7/8” SD Slot B4 - 1” SD Slot B5 - 3/4” Flat B6 - 7/8” Flat B7 - 1” Flat B8 - 3/4” K&S B9 - 7/8” K&S M1 - 1/2” K&S M2 - 5/8” K&S M3 - 3/4”K&S M4 - 7/8” K&S M5 - 1” K&S M6 - 7/8” Flat M7 - 1” Flat M8 - 2” Round Shaft M5 Required with Switch Order From: CTS CORPORATION, RESISTOR/ELECTROCOMPONENTS / 1601 Mishawaka Street / Elkhart, Indiana 46514 North America Toll Free 888 287-4690 / 219 296-6700 / FAX 219 293-1240 CTS COMPONENTS TAIWAN, LTD. / 7, Central 6th Road Chung Liu Road / P.O. Box 26-20 Kaohsiung Export Processing Zone / Kaohsiung, Taiwan, Rep. of China 07 8216145 / FAX 07 11-99I

PDF Datasheet Preview

Series 450 Stock Pot

Industrial 15/16" 24mm diameter 1/2 watt composition variable resistor

The CTS 450 Stock Pot Program provides immediate off-the-shelf availability from select CTS distributors. The program offers a choice of 11 of the most commonly used resistance values, linear or 10% logarithmic tapers and 17 popular plug in shafts which can be quickly assembled.
• Off-the-shelf availability
• Choice of linear or 10% logarithmic tapers
• Wide resistance range
• ±20% resistance tolerance
• Available with four shaft styles knurled and slotted, flatted or round, with a wide selection of lengths and styles. Generally eliminates the need for cutting or modification.
• Economical even in limited volume applications
• Supplied with mounting hardware

Electrical and Mechanical Specifications

Resistance Range 500 ohms through 1 Megohm

Resistance Tolerance Standard ±20%

Power Rating, Watts Through 10K ohms, 1/2 watt above 100K ohms through 100K ohms, 1/3 watt above 100K ohms, 1/4 watt

Voltage Rating Bushing to terminals High pot test, one minute 1080 VAC Operating maximum 750 VDC

Angle of Rotation Total Rotation 300 degrees, ±5º Effective Rotation approximately 300 degrees

Bushing Information Material diecast zinc Diameter EIA std. 3/8 32 UNEF-2A thread Length 3/8" ±1/64" 9.53mm ± 0.39mm Available with 3/8" 32 UNEF-2A thread only

Terminal Information Solder lug, PC formed to rear

Locating Lug Left side, terminals down

Shaft Information Diameter 6.35mm
Optional Switch SPST rotary switch 050 is available with limited shaft and resistance options. See ordering information.

Technical Data Sheet 1448C Technical Data Sheet 1450SPB

CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS

CTS Type 450 Stock Pot

MM DIMENSION:

INCH

Plug In Shafts

Popular shaft styles are available with trim selections including screwdriver slot wide x or 1.19mm x 1.60mm , flat molded shaft flat is.156" wide x long or 3.96mm x 12.7mm, brass shaft flat is x or 9.53mm x 3.69mm , knurled and slotted diameter over knurl molded is - or - mm, brass is - or - mm , or full round.

See trim selections and shaft details in chart below.
Ordering Information
450 T A103 E M4 S

TERMINAL STYLE

T SOLDER LUG V PC FORMED

TO REAR

RESISTANCE OHMS
500 1K 2.5K 10K 25K 50K 100K 250K 500K 1M

LOG A TAPER

A102 A252 A502 A103 A253 A503 A104 A254 A504 A105

LINEAR

D TAPER

D501 D102 D252 D502 D103 D253 D503 D104 D254 D504 D105

MOUNTING STYLE

B 3/8” DIECAST BUSHING

E EAR MOUNT

SWITCH

BLANK NO SWITCH S SPST Rotary 050

Switch is supplied with an assembled molded shaft. Shaft Option M5 Only

SHAFT OPTIONS

BRASS

MOLDED

B1 - 5/8” SD Slot B2 - 3/4” SD Slot B3 - 7/8” SD Slot B4 - 1” SD Slot B5 - 3/4” Flat B6 - 7/8” Flat B7 - 1” Flat B8 - 3/4” K&S B9 - 7/8” K&S

M1 - 1/2” K&S M2 - 5/8” K&S M3 - 3/4”K&S M4 - 7/8” K&S M5 - 1” K&S M6 - 7/8” Flat M7 - 1” Flat M8 - 2” Round

Shaft M5 Required with Switch

Order From:

CTS CORPORATION, RESISTOR/ELECTROCOMPONENTS / 1601 Mishawaka Street / Elkhart, Indiana 46514 North America Toll Free 888 287-4690 / 219 296-6700 / FAX 219 293-1240

CTS COMPONENTS TAIWAN, LTD. / 7, Central 6th Road Chung Liu Road / P.O. Box 26-20 Kaohsiung Export Processing Zone / Kaohsiung, Taiwan, Rep. of China 07 8216145 / FAX 07
11-99I

More datasheets: 450D502F8 | 450D104F8 | 450D252F8 | 450D253F8 | 450D102F8 | 450D102KSD5 | 450D501F8 | 450D501KSD5 | 450TD503BM6 | 450TD253BM6

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 450D502KSD5 Datasheet file may be downloaded here without warranties.

Datasheet ID: 450D502KSD5 507333