831611C6.BB

831611C6.BB Datasheet


Part Datasheet
831611C6.BB 831611C6.BB 831611C6.BB (pdf)
Related Parts Information
83518302 83518302 83518302
83123060 83123060 83123060
831690CR.5.0 831690CR.5.0 831690CR.5.0
83139012 83139012 83139012
83123047 83123047 83123047
83139014 83139014 83139014
831615C6.0 831615C6.0 831615C6.0
831613C6.0 831613C6.0 831613C6.0
831810C1.0 831810C1.0 831810C1.0
831616C3.0 831616C3.0 831616C3.0
831612C6.GB 831612C6.GB 831612C6.GB
83123091 83123091 83123091
831810C1.BL 831810C1.BL 831810C1.BL
831615C6.BB 831615C6.BB 831615C6.BB
831810C1.EL 831810C1.EL 831810C1.EL
831810CFG0.0 831810CFG0.0 831810CFG0.0
831613C6.FB 831613C6.FB 831613C6.FB
79552459 79552459 79552459
79552460 79552460 79552460
831698CR.5.0 831698CR.5.0 831698CR.5.0
83123070 83123070 83123070
831810CFD0.BL 831810CFD0.BL 831810CFD0.BL
83589801 83589801 83589801
831810C2.0 831810C2.0 831810C2.0
831613C6.GB 831613C6.GB 831613C6.GB
831709C2.MB 831709C2.MB 831709C2.MB
831180C1.0 831180C1.0 831180C1.0
83160704 83160704 83160704
831619C6.0SP4136 831619C6.0SP4136 831619C6.0SP4136
831810C2.FL 831810C2.FL 831810C2.FL
831810C1.FL 831810C1.FL 831810C1.FL
831618C6.BB 831618C6.BB 831618C6.BB
83137019 83137019 83137019
83137031 83137031 83137031
831709C1.0 831709C1.0 831709C1.0
831614C6.0 831614C6.0 831614C6.0
831614C6.BB 831614C6.BB 831614C6.BB
831612C6.CB 831612C6.CB 831612C6.CB
831614C6.CB 831614C6.CB 831614C6.CB
831612C6.BB 831612C6.BB 831612C6.BB
79214585 79214585 79214585
79214583 79214583 79214583
79250291 79250291 79250291
79250290 79250290 79250290
79214584 79214584 79214584
79214578 79214578 79214578
79214579 79214579 79214579
79214580 79214580 79214580
79214582 79214582 79214582
83518001 83518001 83518001
831709C2.0 831709C2.0 831709C2.0
831619C6.BB 831619C6.BB 831619C6.BB
831612C6.EB 831612C6.EB 831612C6.EB
70602118 70602118 70602118
831618C2.0 831618C2.0 831618C2.0
831704C2.0 831704C2.0 831704C2.0
83123014 83123014 83123014
79552458 79552458 79552458
79210998 79210998 79210998
79552457 79552457 79552457
79552456 79552456 79552456
24678128 24678128 24678128
24678172 24678172 24678172
24678174 24678174 24678174
79238250 79238250 79238250
24678127 24678127 24678127
831 831 831
831612C6.0 831612C6.0 831612C6.0
83523304 83523304 83523304
83523004 83523004 83523004
83123042 83123042 83123042
83161075 83161075 83161075
831700C1.0 831700C1.0 831700C1.0
831613C6.L 831613C6.L 831613C6.L
83123018 83123018 83123018
831613C6.CB 831613C6.CB 831613C6.CB
831613C6.EB 831613C6.EB 831613C6.EB
831704C1.0 831704C1.0 831704C1.0
70507528 70507528 70507528
831810C2.EL 831810C2.EL 831810C2.EL
831611C6.0 831611C6.0 831611C6.0
831704C3.0 831704C3.0 831704C3.0
831613C3.L 831613C3.L 831613C3.L
831613C6.BB 831613C6.BB 831613C6.BB
831067C3.0 831067C3.0 831067C3.0
831810CFD0.EL 831810CFD0.EL 831810CFD0.EL
831615C60SP4136 831615C60SP4136 831615C60SP4136
831810C2.BL 831810C2.BL 831810C2.BL
831619C6.GB 831619C6.GB 831619C6.GB
831619C6.0 831619C6.0 831619C6.0
831618C6.0 831618C6.0 831618C6.0
831704C2.MB 831704C2.MB 831704C2.MB
83154001 83154001 83154001
831370C3.W 831370C3.W 831370C3.W
83800151 83800151 83800151
831391CBB.5.0 831391CBB.5.0 831391CBB.5.0
831700C2.0 831700C2.0 831700C2.0
831060C3.0 831060C3.0 831060C3.0
831060C3.BL 831060C3.BL 831060C3.BL
83123005 83123005 83123005
83123018.RB 83123018.RB 83123018.RB
83137052 83137052 83137052
83137004 83137004 83137004
831810CFD0.0 831810CFD0.0 831810CFD0.0
83123015 83123015 83123015
83123032 83123032 83123032
PDF Datasheet Preview
Limit Switches Technical Guide

Introduction

Rules and regulations

What is meant by a "position detector" is any device which needs to be operated by a member which exerts a physical force, in view of - either the form which its operating device takes - or the considerable force needed to operate it

EC Directives

Our detectors conform to the EC Low Voltage Technical Directive 73/23/EEC and can be used in accordance with the specifications of the Machinery Directive 89/392/EEC.

The distinguishing features of position detectors are - their high electrical performance capability - their excellent resistance to accidental impact - good protection against splashed or dripping water - a wide range of operating devices to allow the detectors to be
adapted to a vast variety of mechanisms

Environmental conditions

Temperature limits When they are used in the temperature range quoted, the mechanical and electrical characteristics of our position detectors will remain substantially unchanged. If you intend to use them outside this range, please consult us.

Construction

Our detectors are designed to conform to international IEC recommendations and/or European standards EN . Proof that a detector conforms to these standards or recommendations takes the form of a conformity declaration made by the manufacturer drafted as indicated in guidance document ISO/IEC 22 - EN Characteristics in line with the general requirements of standards NFC 63140, IEC and EN - Leakage paths and air gaps IEC - NFC Our position detectors which comply with IEC can be fitted to machine-tools and industrial machines complying with NFC 79130, IEC EN60204 or VDE

Protective treatment The treatment given to our position detectors is suitable in the vast majority of applications. Parts made of steel are zinc-coated or painted according to their mechanical function. Further information is available on request. This treatment allows our detectors to be used under the following temperature and humidity conditions :

T °C

Relative humidity % 95

This treatment may thus be suitable for applications in tropical or equatorial
climates where the equipment concerned is in an interior location sheltered
from direct exposure to atmospheric conditions.

Other types of reinforced protection are possible for resistance to very severe
environments.

Please enquire.

Electrical characteristics

Mounting requirements

Assigned working current Ie - the current level adopted as a basis for the operating conditions quoted
for a detector, and for the life tests on it.

Electric shock protection. The user should observe the mounting instructions relating to the mode of protection against electric shocks defined in the IEC EN NFC 20030 standards :

Thermal rating Ith - the current the microswitch will withstand when not being operated
electrically, for a temperature rise of not more than 60 °C.

Class I earth circuit link. Protection via differential circuit-breaker. Class II double insulation. Class III very low safety voltage.

Assigned insulation voltage Ui :

Screw tightening torque :
- the voltage adopted as a reference for the dielectric tests and leakage
1 Actuator tightening
to Nm
paths. It must be equal to or greater than the assigned working voltage. Categories of use IEC

Plastic body

Metal body
- AC 15 for operating AC solenoids and electromagnets
2 Head fixing screw
to Nm to 1 Nm
- DC 13 for operating DC solenoids and electromagnets
More datasheets: 831611C6.0 | 831704C3.0 | 831613C3.L | 831613C6.BB | 831067C3.0 | 831810CFD0.EL | 831615C60SP4136 | 831810C2.BL | 831619C6.GB | 831619C6.0


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 831611C6.BB Datasheet file may be downloaded here without warranties.

Datasheet ID: 831611C6.BB 507166