88982113

88982113 Datasheet

Part	Datasheet
88982113	88982113 (pdf)

PDF Datasheet Preview
››em4 Accessories Digital expansions to two digital / analog expansions can be added to the em4 nanoPLC to expand up to 46 I/Os digital / analog configurable inputs 0-10 VDC, VDC, Potentiometer allowing the use of NTC temperature sensors or LDR light sensors without using an additional converter relay outputs 2x 6A/250VAC & 2X 8A/250VAC allowing controlling power actuators valves, pumps... Digital expansion Glossy black Specific characteristics Part number Type Inputs Outputs Supply Finish On front panel color On terminal block color Protection rating in accordance with IEC/EN 60529 Weight Dimensions 88 982 113 E10R 6 digital inputs configurable as analog 0-10 VDC, VDC, Potentiometer 4 relay outputs including 2x 6A/250VAC and 2x 8A/250VAC 24 VDC powered by the controller Glossy black RAL 9011 Blue RAL 5017 IP 40 on front panel IP 20 on terminal block Without packing 130 g With packing 170 g Without packing x 90 x mm x inch With packing 93 x 103 x 65 mm x inch General characteristics Products certification in accordance with IEC/EN 60529 Conformity with the low voltage directive in accordance with BT 2006/95/EC Conformity with the EMC directive in accordance with 2004/108/EC Earthing Overvoltage category Pollution CE, cULus Listed IEC/EN 61131-2 Open equipment IEC/EN 61000-6-1 Residential, commercial and light-industrial environments IEC/EN 61000-6-2 Industrial IEC/EN 61000-6-3 Residential, commercial and light-industrial environments IEC/EN 61000-6-4 Industrial None 3 in accordance with IEC/EN 60664-1 Degree 2 in accordance with IEC/EN 61131-2 I em4 Maximum utilization altitude Mechanical resistance to electrostatic discharge Resistance to HF interference Immunity Conducted and radiated emissions in accordance with EN 55022/11 group 1 Operation temperature Storage temperature Relative humidity Screw terminals connection capacity Supply Nominal voltage Max. absorbed power Operation 2000 m Transport 3000 m Immunity to vibrations IEC/EN 60068-2-6, Fc test Immunity to shock IEC/EN 60068-2-27, Ea test Immunity to ESD IEC/EN 61000-4-2, level 3 Immunity to radiated electrostatic fields IEC/EN 61000-4-3, level 3 Immunity to fast transients burst immunity IEC/EN 61000-4-4, level 3 Immunity to shock waves IEC/EN 61000-4-5 Radio frequency in common mode IEC/EN 61000-4-6, level 3 Class B - 20 °C -4°F  +60°C 140°F +40°C 104°F in a non-ventilated enclosure - 40 °C -40°F  +80°C 176°F 95% max. no condensation or dripping water Flexible wire with ferrule 1 conductor to mm2 AWG 24...AWG 14 Flexible wire with ferrule 2 conductors to mm2 AWG 24...AWG 18 Rigid wire 1 conductor to mm2 AWG 24...AWG 14 Rigid wire 2 conductors to mm2 AWG 24...AWG 18 Tightening torque N.m lb-in tighten using screwdriver diam. mm Stripping length 6 mm Powered by the controller W Inputs Digital 24 VDC and analog inputs 12 bit / V - 6 inputs from I1 to I6 Input used as digital input power off state Input voltage 24 VDC -15% / +20% Input current mA V mA 24 V mA V Input impedance Logic 1 voltage threshold u 11 VDC Making current at logic state 1 u 1 mA Logic 0 voltage threshold y 9 VDC

PDF Datasheet Preview

››em4

Accessories

Digital expansions
to two digital / analog expansions can be
added to the em4 nanoPLC to expand up to 46 I/Os
digital / analog configurable inputs 0-10 VDC,

VDC, Potentiometer allowing the use of NTC temperature sensors or LDR light sensors without using an additional converter
relay outputs 2x 6A/250VAC & 2X 8A/250VAC
allowing controlling power actuators valves, pumps...

Digital expansion Glossy black

Specific characteristics Part number Type Inputs Outputs Supply Finish On front panel color On terminal block color Protection rating in accordance with IEC/EN 60529 Weight

Dimensions
88 982 113 E10R
6 digital inputs configurable as analog 0-10 VDC, VDC, Potentiometer
4 relay outputs including 2x 6A/250VAC and 2x 8A/250VAC 24 VDC powered by the controller Glossy black RAL 9011 Blue RAL 5017 IP 40 on front panel IP 20 on terminal block

Without packing 130 g With packing 170 g

Without packing x 90 x mm x inch

With packing 93 x 103 x 65 mm x inch

General characteristics Products certification in accordance with IEC/EN 60529 Conformity with the low voltage directive in accordance with BT 2006/95/EC Conformity with the EMC directive in accordance with 2004/108/EC

Earthing Overvoltage category Pollution

CE, cULus Listed IEC/EN 61131-2 Open equipment

IEC/EN 61000-6-1 Residential, commercial and light-industrial environments IEC/EN 61000-6-2 Industrial IEC/EN 61000-6-3 Residential, commercial and light-industrial environments IEC/EN 61000-6-4 Industrial None 3 in accordance with IEC/EN 60664-1 Degree 2 in accordance with IEC/EN 61131-2

I em4

Maximum utilization altitude Mechanical resistance to electrostatic discharge Resistance to HF interference Immunity

Conducted and radiated emissions in accordance with EN 55022/11 group 1 Operation temperature Storage temperature Relative humidity Screw terminals connection capacity

Supply Nominal voltage Max. absorbed power

Operation 2000 m Transport 3000 m Immunity to vibrations IEC/EN 60068-2-6, Fc test Immunity to shock IEC/EN 60068-2-27, Ea test Immunity to ESD IEC/EN 61000-4-2, level 3 Immunity to radiated electrostatic fields IEC/EN 61000-4-3, level 3 Immunity to fast transients burst immunity IEC/EN 61000-4-4, level 3 Immunity to shock waves IEC/EN 61000-4-5 Radio frequency in common mode IEC/EN 61000-4-6, level 3 Class B
- 20 °C -4°F  +60°C 140°F +40°C 104°F in a non-ventilated enclosure - 40 °C -40°F  +80°C 176°F 95% max. no condensation or dripping water Flexible wire with ferrule 1 conductor to mm2 AWG 24...AWG 14 Flexible wire with ferrule 2 conductors to mm2 AWG 24...AWG 18 Rigid wire 1 conductor to mm2 AWG 24...AWG 14 Rigid wire 2 conductors to mm2 AWG 24...AWG 18 Tightening torque N.m lb-in tighten using screwdriver diam. mm Stripping length 6 mm

Powered by the controller W

Inputs

Digital 24 VDC and analog inputs 12 bit / V - 6 inputs from I1 to I6

Input used as digital input power off state Input voltage
24 VDC -15% / +20%

Input current
mA V mA 24 V mA V

Input impedance Logic 1 voltage threshold
u 11 VDC

Making current at logic state 1
u 1 mA

Logic 0 voltage threshold
y 9 VDC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 88982113 Datasheet file may be downloaded here without warranties.

Datasheet ID: 88982113 507161