L595200

L595200 Datasheet

L595 SERIES

Part	Datasheet
L595200	L595200 (pdf)

Related Parts	Information
L595020	L595020
S8	S8
S5	S5

PDF Datasheet Preview
CONTROL ACCESSORIES CONTROL ACCESSORIES S5 LEVEL PROBE HOLDER Single probe holder for use with probe rod of various lengths. This " probe is particularly suitable for high temperature and/or high pressure 6.5mm applications. It is capable of operating at temperatures up to 200°C 392°F and pressures up to 700PSI. Order part # S5. Threaded Rod. Order part number S5/1. NOTE Internal Threading 1/4 x 20 84mm 46.5mm 29mm " 13mm " 49mm #8 - 32 #3/8 - 18 Dry Seal S8 LEVEL PROBE The S8 probe will hold one, two or three 4mm probes. The S8 comes with three 3 one meter lengths of 4mm stainless steel rod. It comes equipped with a black SBS rubber protective top through which the leads are routed at a 90° angle. SPECIFICATIONS: Material - Holder Polyamide Material - Top Boot SBS Styrene Butadiene Wire Terminal Stainless Steel with M2 x 4 brass screws Probe Holder Stainless steel Gasket BB701 Butadiene Thread Size NPT Operating Temp 176°F 80°C Max Pressure 2 Kg/CM2 28 PSI 43mm 18mm 12mm 26mm Electrode Bearer Thread Top Cover Probe Holder Screw, CB M2 x 4 Brass Gasket, 24 x 31mm thickness 2mm 1 to 3 Inox Rod:4mm Note The end of the rod has to be threaded #8-32 to fit the probe holder. Products and specifications subject to change without notice. Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 / 2/98 CONTROL ACCESSORIES DR DIN-RAIL The DR-DIN-Rail material is an extruded aluminum material of the standard configuration, 35mm. Timers and Controls conveniently snap onto the track. Order part number “DR” which is available in 1 meter lengths. Shown with S08, S11 and K11 sockets. CONTROL ACCESSORIES S08, S11 SCREW TERMINAL SOCKETS The S08, and S11 are 8 and 11 pin sockets fabricated from a rugged, durable polycarbonate.* Mounting is with two 6/32 screws or on DIN-Rail, DR. Order part “S08” or “S11.” S08-600 V, 10 A rated 8 pin socket-UL and CSA 76 mm 4.19mm 56mm 36mm 37mm 43mm 29mm BND DIN Rail ORDERING INFORMATION: • Compatible with IAR.T Series Part Number Input Current SPECIFICATIONS: L595-020 20 Amps Input Current 20 to 400 Amps AC 50/60 Hz L595-050 50 Amps Output Current 100 mA AC L595-100 100 Amps Connections Insulation Class Enclosure #20 AWG long wires 600 VAC Fiberglass reinforced resin L595-200 L595-300 L595-400 200 Amps 300 Amps 400 Amps L546 SERIES DIMENSIONS: CURRENT TRANSFORMER • 50 to 500 Amps ORDERING INFORMATION: • Compatible with F3I and FWIT Series Part Number Input Current SPECIFICATIONS: L546-050 50 Amps Input Current Output Current Connections 50 to 500 Amps AC 50/60 Hz 5 Amps AC #16 AWG long wires L546-100 L546-200 L546-500 100 Amps 200 Amps 500 Amps Insulation Class 600 VAC Enclosure Molded thermoplastic Products and specifications subject to change without notice. Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 / 2/99

PDF Datasheet Preview

CONTROL ACCESSORIES

CONTROL ACCESSORIES

S5 LEVEL PROBE HOLDER

Single probe holder for use with probe rod of various lengths. This " probe is particularly suitable for high temperature and/or high pressure 6.5mm applications. It is capable of operating at temperatures up to 200°C 392°F and pressures up to 700PSI. Order part # S5.

Threaded Rod. Order part number S5/1.

NOTE Internal Threading 1/4 x 20
84mm
46.5mm
29mm
" 13mm
" 49mm #8 - 32
#3/8 - 18 Dry Seal

S8 LEVEL PROBE

The S8 probe will hold one, two or three 4mm probes. The S8 comes with three 3 one meter lengths of 4mm stainless steel rod. It comes equipped with a black SBS rubber protective top through which the leads are routed at a 90° angle.

SPECIFICATIONS:

Material - Holder Polyamide Material - Top Boot SBS Styrene Butadiene Wire Terminal Stainless Steel with M2 x 4
brass screws Probe Holder Stainless steel Gasket BB701 Butadiene Thread Size NPT Operating Temp 176°F 80°C Max Pressure 2 Kg/CM2 28 PSI
43mm
18mm
12mm
26mm

Electrode Bearer Thread

Top Cover

Probe Holder Screw, CB M2 x 4 Brass

Gasket, 24 x 31mm thickness 2mm 1 to 3 Inox Rod:4mm

Note The end of the rod has to be threaded #8-32 to fit the probe holder.

Products and specifications subject to change without notice.

Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 / 2/98

CONTROL ACCESSORIES

DR DIN-RAIL

The DR-DIN-Rail material is an extruded aluminum material of the standard configuration, 35mm. Timers and Controls conveniently snap onto the track. Order part number “DR” which is available in 1 meter lengths. Shown with S08, S11 and K11 sockets.

CONTROL ACCESSORIES

S08, S11 SCREW TERMINAL SOCKETS

The S08, and S11 are 8 and 11 pin sockets fabricated from a rugged, durable polycarbonate.* Mounting is with two 6/32 screws or on DIN-Rail, DR. Order part “S08” or “S11.”

S08-600 V, 10 A rated 8 pin socket-UL and CSA
76 mm
4.19mm 56mm
36mm
37mm
43mm
29mm BND DIN Rail
ORDERING INFORMATION:
• Compatible with IAR.T Series

Part Number Input Current

SPECIFICATIONS:

L595-020
20 Amps

Input Current 20 to 400 Amps AC 50/60 Hz

L595-050
50 Amps

Output Current 100 mA AC

L595-100
100 Amps

Connections Insulation Class Enclosure
#20 AWG long wires 600 VAC Fiberglass reinforced resin

L595-200 L595-300 L595-400
200 Amps 300 Amps 400 Amps

L546 SERIES

DIMENSIONS:

CURRENT TRANSFORMER
• 50 to 500 Amps
ORDERING INFORMATION:
• Compatible with F3I and FWIT Series

Part Number Input Current

SPECIFICATIONS:

L546-050
50 Amps

Input Current Output Current Connections
50 to 500 Amps AC 50/60 Hz 5 Amps AC #16 AWG long wires

L546-100 L546-200 L546-500
100 Amps 200 Amps 500 Amps

Insulation Class 600 VAC

Enclosure Molded thermoplastic

Products and specifications subject to change without notice.

Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 / 2/99

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived L595200 Datasheet file may be downloaded here without warranties.

Datasheet ID: L595200 507153