MPLEZW-A1-R100-0000C030F

MPLEZW-A1-R100-0000C030F Datasheet

The XLamp MP-L EasyWhite LED is the perfect choice for lighting applications where high luminous flux output is required from a single, small point source. Examples of specific applications include commercial/retail display spotlights, LED retrofit bulbs, and other indoor general illumination applications.

Part	Datasheet
MPLEZW-A1-R100-0000C030F	MPLEZW-A1-R100-0000C030F (pdf)

Related Parts	Information
MPLEZW-A1-R100-0000B027F	MPLEZW-A1-R100-0000B027F
MPLEZW-A1-R100-0000B027H	MPLEZW-A1-R100-0000B027H
MPLEZW-A1-R100-0000B030H	MPLEZW-A1-R100-0000B030H
MPLEZW-A1-R100-0000C035F	MPLEZW-A1-R100-0000C035F
MPLEZW-A1-R100-0000C030H	MPLEZW-A1-R100-0000C030H
MPLEZW-A1-R100-0000C040F	MPLEZW-A1-R100-0000C040F
MPLEZW-A1-0000-0000D040F	MPLEZW-A1-0000-0000D040F
MPLEZW-A1-R100-0000B035F	MPLEZW-A1-R100-0000B035F
MPLEZW-A1-R100-0000D040F	MPLEZW-A1-R100-0000D040F
MPLEZW-A1-0000-0000B027F	MPLEZW-A1-0000-0000B027F
MPLEZW-A1-0000-0000B030F	MPLEZW-A1-0000-0000B030F
MPLEZW-A1-0000-0000B035F	MPLEZW-A1-0000-0000B035F
MPLEZW-A1-0000-0000C035F	MPLEZW-A1-0000-0000C035F
MPLEZW-A1-0000-0000C040F	MPLEZW-A1-0000-0000C040F
MPLEZW-A1-R100-0000B030F	MPLEZW-A1-R100-0000B030F
MPLEZW-A1-0000-0000C030H	MPLEZW-A1-0000-0000C030H
MPLEZW-A1-0000-0000C040H	MPLEZW-A1-0000-0000C040H
MPLEZW-A1-0000-0000B035H	MPLEZW-A1-0000-0000B035H
MPLEZW-A1-0000-0000D040H	MPLEZW-A1-0000-0000D040H
MPLEZW-A1-R100-0000C035H	MPLEZW-A1-R100-0000C035H
MPLEZW-A1-R100-0000C040H	MPLEZW-A1-R100-0000C040H
MPLEZW-A1-R100-0000D040H	MPLEZW-A1-R100-0000D040H
MPLEZW-A1-0000-0000C035H	MPLEZW-A1-0000-0000C035H
MPLEZW-A1-0000-0000B030H	MPLEZW-A1-0000-0000B030H
MPLEZW-A1-0000-0000B027H	MPLEZW-A1-0000-0000B027H
MPLEZW-A1-0000-0000C027H	MPLEZW-A1-0000-0000C027H
MPLEZW-A1-0000-0000C027F	MPLEZW-A1-0000-0000C027F
MPLEZW-A1-0000-0000E040F	MPLEZW-A1-0000-0000E040F
MPLEZW-A1-0000-0000E040H	MPLEZW-A1-0000-0000E040H
MPLEZW-A1-R100-0000E040H	MPLEZW-A1-R100-0000E040H
MPLEZW-A1-R100-0000E040F	MPLEZW-A1-R100-0000E040F
MPLEZW-A1-R100-0000C027H	MPLEZW-A1-R100-0000C027H
MPLEZW-A1-R100-0000C027F	MPLEZW-A1-R100-0000C027F
MPLEZW-A1-R100-0000B035H	MPLEZW-A1-R100-0000B035H
MPLEZW-A1-0000-0000C030F	MPLEZW-A1-0000-0000C030F

PDF Datasheet Preview
Product family data sheet MP-L LEDs Product Description The MP-L LED eliminates traditional chromaticity binning and maximizes lumen density, enabling luminaire and bulb retrofit manufacturers to deliver consistent color and required light output to the target end user. XLamp MP-L EasyWhite LEDs can reduce LEDto-LED color variation to within a 2-step MacAdams ellipse around the desired color temperature, which is 94% smaller than the total area of the corresponding ANSI C78.377 color region. The XLamp MP-L EasyWhite LED is the perfect choice for lighting applications where high luminous flux output is required from a single, small point source. Examples of specific applications include commercial/retail display spotlights, LED retrofit bulbs, and other indoor general illumination applications. FEATURES • Cree EasyWhite color temperatures • High lumen density • Wide viewing angle 125° • Minimum 80 CRI at 2700 K and 3000 K CCT • Electrically neutral thermal path • RoHS- and • recognized component E349212 Applications • Commercial/residential directional lighting • LED retrofit bulbs • General indoor/outdoor illumination Table of Contents 2 Flux Relative Spectral Power Distribution......3 Electrical Relative Luminous Flux vs Current and Solder Point Temperature........................4 Typical Spatial Distribution......................4 Reflow Soldering Characteristics............5 Bin and Order-Code Format.....................6 Performance Groups Brightness.........7 Performance Groups Chromaticity......7 Cree Color Temperatures Plotted on the 1931 CIE Curve................8 Standard Order Codes and Bins..............9 Mechanical Dimensions........................12 Tape and Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. and are registered trademarks and the Cree logo is a trademark of Cree, Inc. and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: MP-L LED Characteristics Unit °C degrees mV/°C W mA V Minimum Typical 125 -30 Class 2 Maximum 110 Flux Characteristics 150 mA TJ = 25 °C The following table provides several base order codes for XLamp MP-L EasyWhite LEDs. For additional order codes, as well as a complete description of the order-code nomenclature, please reference pages 6 through 9 of this document. Color EasyWhite 4-Step Color EasyWhite 2-Step CCT Range 4000 K 3500 K 3000 K 2700 K CCT Range 4000 K 3500 K 3000 K 2700 K Minimum Luminous Flux lm Group Flux lm 1000 Minimum Luminous Flux lm Group Flux lm 1000

PDF Datasheet Preview

Product family data sheet

MP-L LEDs

Product Description

The MP-L LED eliminates traditional chromaticity binning and maximizes lumen density, enabling luminaire and bulb retrofit manufacturers to deliver consistent color and required light output to the target end user. XLamp MP-L EasyWhite LEDs can reduce LEDto-LED color variation to within a 2-step MacAdams ellipse around the desired color temperature, which is 94% smaller than the total area of the corresponding ANSI C78.377 color region.

The XLamp MP-L EasyWhite LED is the perfect choice for lighting applications where high luminous flux output is required from a single, small point source. Examples of specific applications include commercial/retail display spotlights, LED retrofit bulbs, and other indoor general illumination applications.

FEATURES
• Cree EasyWhite color temperatures
• High lumen density
• Wide viewing angle 125°
• Minimum 80 CRI at 2700 K and
3000 K CCT
• Electrically neutral thermal path
• RoHS- and
• recognized component

E349212

Applications
• Commercial/residential directional
lighting
• LED retrofit bulbs
• General indoor/outdoor illumination

Table of Contents
2 Flux Relative Spectral Power Distribution......3 Electrical Relative Luminous Flux vs Current and Solder Point Temperature........................4 Typical Spatial Distribution......................4 Reflow Soldering Characteristics............5 Bin and Order-Code Format.....................6 Performance Groups Brightness.........7 Performance Groups Chromaticity......7 Cree Color Temperatures Plotted on the 1931 CIE Curve................8 Standard Order Codes and Bins..............9 Mechanical Dimensions........................12 Tape and

Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. and are registered trademarks and the Cree logo is a trademark of Cree, Inc. and the UR logo are registered trademarks of UL LLC.

Cree, Inc. 4600 Silicon Drive Durham, NC 27703

USA Tel:

MP-L LED

Characteristics

Unit °C degrees mV/°C

W mA V

Minimum

Typical
125 -30 Class 2

Maximum 110

Flux Characteristics 150 mA TJ = 25 °C

The following table provides several base order codes for XLamp MP-L EasyWhite LEDs. For additional order codes, as well as a complete description of the order-code nomenclature, please reference pages 6 through 9 of this document.

Color

EasyWhite 4-Step

Color

EasyWhite 2-Step

CCT Range 4000 K
3500 K 3000 K 2700 K

CCT Range 4000 K
3500 K 3000 K 2700 K

Minimum Luminous Flux lm

Group

Flux lm
1000

Minimum Luminous Flux lm

Group

Flux lm
1000

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MPLEZW-A1-R100-0000C030F Datasheet file may be downloaded here without warranties.

Datasheet ID: MPLEZW-A1-R100-0000C030F 507025