8002-05-01

8002-05-01 Datasheet


8000 Series/DIP Reed Relays

Part Datasheet
8002-05-01 8002-05-01 8002-05-01 (pdf)
Related Parts Information
8021-05-01 8021-05-01 8021-05-01
8061-05-001 8061-05-001 8061-05-001
8061-05-011 8061-05-011 8061-05-011
8061-12-001 8061-12-001 8061-12-001
8061-12-011 8061-12-011 8061-12-011
8061-12-111 8061-12-111 8061-12-111
8041-12-101 8041-12-101 8041-12-101
8021-12-01 8021-12-01 8021-12-01
8002-12-00 8002-12-00 8002-12-00
8002-12-01 8002-12-01 8002-12-01
8002-05-11 8002-05-11 8002-05-11
8002-12-10 8002-12-10 8002-12-10
8002-12-11 8002-12-11 8002-12-11
8041-05-111 8041-05-111 8041-05-111
8041-12-001 8041-12-001 8041-12-001
8002-05-00 8002-05-00 8002-05-00
8001-12-001 8001-12-001 8001-12-001
8001-05-101 8001-05-101 8001-05-101
8001-05-011 8001-05-011 8001-05-011
8001-05-111 8001-05-111 8001-05-111
8041-05-011 8041-05-011 8041-05-011
8061-05-101 8061-05-101 8061-05-101
8041-05-001 8041-05-001 8041-05-001
8002-05-10 8002-05-10 8002-05-10
8001-05-001 8001-05-001 8001-05-001
8041-12-011 8041-12-011 8041-12-011
8021-05-11 8021-05-11 8021-05-11
8041-05-101 8041-05-101 8041-05-101
PDF Datasheet Preview
8000 Series/DIP Reed Relays

DIP Reed Relays The 8000 Series is ideally suited to the needs of Automated Test Equipment, Instrumentation, Data Acquisition, and Process Control requirements. The specification tables allow you to select the appropriate relay for your particular application. If your requirements differ from the selection options, please consult your local representative or Coto’s Factory to discuss a custom reed relay.
8000 Series Features 14-Pin DIP industry standard package High Insulation Resistance - 1012 offered on most models High reliability, hermetically sealed contacts for long life proven to 500 million operations Contact forms 1A, 2A, 1B and 1C available Surface mount version available Molded thermoset body on integral lead frame design Optional Electrostatic Shield for reducing capacitive coupling Coil suppression diode available High Voltage Breakdown versions available UL File # E67117

For Model #’s 8001, 8002, 8021 & 8041

For Model # 8061

Dimensions in Inches Millimeters
24 COTO TECHNOLOGY USA Tel 401 943-2686 / Fax 401 942-0920 6 Europe Tel +31-45-5439343 / Fax +31-45-5427216
8000 Series/DIP Reed Relays

Top View Dot stamped on top of relay refers to pin #1 location

Grid = .1"x.1" 2.54mm x 2.54mm
1 Consult factory for life expectancy at other switching loads. 2 Molded depression on top of relay refers to pin #1 location. 3 Optional coil suppression diode across pins 2 + and 4 Optional ES Shield is tied to pin 5 Surface mount processing temperature 260°C max
for 1 minute dwell time. Temperature measured on leads where lead exits molded package. 6 Consists of 56V Zener diode and 1N4148 diode in series, connected in parallel with coil.

Environmental Ratings Storage Temp -35°C to +100°C Operating Temp -20°C to +85°C

Solder Temp 270°C max 10 sec. max

The operate and release voltage and the coil resistance are
specified at 25°C.

These values vary by approximately / °C as the ambient
temperature varies.

Vibration 20 G’s to 2000 Hz Shock 50 G’s

For Most Recent Data, Consult the Coto Technology Website 6 E-mail:
More datasheets: CS-TINYPAT-01 | 8021-05-01 | 8061-05-001 | 8061-05-011 | 8061-12-001 | 8061-12-011 | 8061-12-111 | 8041-12-101 | 8021-12-01 | 8002-12-00


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8002-05-01 Datasheet file may be downloaded here without warranties.

Datasheet ID: 8002-05-01 506903