CC-900W-CA

CC-900W-CA Datasheet

Socket Radio CC-900W

Part	Datasheet
CC-900W-CA	CC-900W-CA (pdf)

PDF Datasheet Preview
Socket Radio Socket Radio CC-900W ? Self-contained 30K baud wireless modem ? 902 928 MHz ISM band ? Point-to-point or point-to-multipoint communications ? RF connector or integrated antenna ? 500 Feet line-of-sight Range ? FCC compliant certified as module ? Automatic channel selection via carrier sense ? Wide dynamic range receiver for harsh environments ? AT command set ? Serial host interface ? Footprint and protocol compatible with all Copeland Communications high speed socket modems ? Internal UART with flow control ? SocketModem compatible ? Low power consumption V operation ? Low Power Standby Mode ? Small footprint X ? Global Embedded applications ? Point-of-sale terminals ? Set-top boxes ? Vending & gaming machines ? Security Systems ? Remote monitoring & control ? Remote telemetry and SCADA ? OEM applications The Socket Radio is a complete embedded wireless modem. The Socket Radio accepts standard modem AT commands and provides connect rates up to 30 kbps half-duplex. The Socket Radio provides numerous additional features for embedded modem applications. This device is ideal for embedded modem applications due to its small board space and low power consumption. The Socket Radio allows for rapid integration into existing modem applications by providing a serial interface that can directly communicate to a microcontroller via a UART interface. The development kit comes with a USB adapter that will appear as a serial port to the PC. This interface allows for PC evaluation of the modem immediately upon power up via the AT commands using standard terminal software. The Socket Radio is a bi-directional data communications radio to be used for two-way communication to another Socket Radio. The radio emulates a standard Hayes compatible telephone modem in a socket modem physical format. Each radio has a permanent unique Identification Number ID . This allows multiple radios to coexist on the same channel. The radios operate in a peer to peer switched network while providing the appearance of a switched phone line network. 2005, Copeland Communications, Inc. Page 1 of 16 Socket Radio CC-900W Datasheet Rev Block Diagram Socket Radio 2005, Copeland Communications, Inc. Page 2 of 16 Socket Radio CC-900W Datasheet Rev Host Interface Socket Radio The serial interface on the 3.3V Socket Radio is not 5V tolerant. The USER IO signals on the 3.3V Socket Radio are not 5V tolerant. Socket Radio modems can be directly connected into volt systems with volt or 5 volt power supplies. The default host speed of Kb and 8N1 format 8 data bits, no parity bit and 1 stop bit . The defaults can be changes after initialization by using standard AT commands. A true RS-232 interface is available on the Socket Radio Evaluation Kit. The Asynchronous Serial Interface is a complete UART consisting of Receive and Transmit signals as well as RTS/CTS, control is supported. The UART is programmable to support a number of baud rates and data formats. Supported data rates and formats are: Data Bits 8 Stop Bits 1 Parity Bits None Baud Rates 9600, 19200, 38400, 57600, 115200 Page 3 of 16 2005, Copeland Communications, Inc. Socket Radio CC-900W Datasheet Rev Mechanical Outline Socket Radio Figure 1 - CC-900W MMCX model -B 2005, Copeland Communications, Inc. Page 4 of 16 Socket Radio CC-900W Datasheet Rev Socket Radio Ordering Part Number CC-900W-CA CC-900W-CB CC-900W-CA5 CC-900W-CB5 Description 0 - 70° C 0 - 70° C 0 - 70° C 0 - 70° C C = Commercial temperature I = Industrial temperature A = On board Antenna B = MMCX connector Blank = 3.3V power supply 5 = 5V power supply Contact factory for special configurations. Socket Radio 2005, Copeland Communications, Inc. Page 15 of 16 Socket Radio CC-900W Datasheet Rev Contact Information Copeland Communications, Inc. 440 Colony Place Gahanna, OH 43230 Tel 614 475-1690 Fax 614 882-6062 Email Internet: Socket Radio Legal Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Copeland Communications, Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Copeland Communication’s products as critical components in life support systems is not authorized except with express written approval by Copeland Communications. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights. 2005, Copeland Communications, Inc. Page 16 of 16 Socket Radio CC-900W Datasheet Rev

PDF Datasheet Preview

Socket Radio

Socket Radio CC-900W
? Self-contained 30K baud wireless modem ? 902 928 MHz ISM band ? Point-to-point or point-to-multipoint
communications
? RF connector or integrated antenna ? 500 Feet line-of-sight Range ? FCC compliant certified as module ? Automatic channel selection via carrier sense ? Wide dynamic range receiver for harsh
environments
? AT command set
? Serial host interface ? Footprint and protocol compatible with all

Copeland Communications high speed socket modems ? Internal UART with flow control
? SocketModem compatible ? Low power consumption V operation
? Low Power Standby Mode ? Small footprint X
? Global Embedded applications ? Point-of-sale terminals ? Set-top boxes ? Vending & gaming machines
? Security Systems ? Remote monitoring & control ? Remote telemetry and SCADA ? OEM applications

The Socket Radio is a complete embedded wireless modem. The Socket Radio accepts standard modem AT commands and provides connect rates up to 30 kbps half-duplex. The Socket Radio provides numerous additional features for embedded modem applications. This device is ideal for embedded modem applications due to its small board space and low power consumption. The Socket Radio allows for rapid integration into existing modem applications by providing a serial interface that can directly communicate to a microcontroller via a UART interface. The development kit comes with a USB adapter that will appear as a serial port to the PC. This interface allows for PC evaluation of the modem immediately upon power up via the AT commands using standard terminal software.

The Socket Radio is a bi-directional data communications radio to be used for two-way communication to another Socket Radio. The radio emulates a standard Hayes compatible telephone modem in a socket modem physical format. Each radio has a permanent unique Identification Number ID . This allows multiple radios to coexist on the same channel. The radios operate in a peer to peer switched network while providing the appearance of a switched phone line network.
2005, Copeland Communications, Inc.

Page 1 of 16

Socket Radio CC-900W Datasheet Rev

Block Diagram

Socket Radio
2005, Copeland Communications, Inc.

Page 2 of 16

Socket Radio CC-900W Datasheet Rev

Host Interface

Socket Radio

The serial interface on the 3.3V Socket Radio is not 5V tolerant.

The USER IO signals on the 3.3V Socket Radio are not 5V tolerant.

Socket Radio modems can be directly connected into volt systems with volt or 5 volt power supplies. The default host speed of Kb and 8N1 format 8 data bits, no parity bit and 1 stop bit . The defaults can be changes after initialization by using standard AT commands. A true RS-232 interface is available on the Socket Radio Evaluation Kit.

The Asynchronous Serial Interface is a complete UART consisting of Receive and Transmit signals as well as RTS/CTS, control is supported.

The UART is programmable to support a number of baud rates and data formats. Supported data rates and formats are:

Data Bits 8 Stop Bits 1 Parity Bits None Baud Rates 9600, 19200, 38400, 57600, 115200

Page 3 of 16
2005, Copeland Communications, Inc.

Socket Radio CC-900W Datasheet Rev

Mechanical Outline

Socket Radio

Figure 1 - CC-900W MMCX model -B
2005, Copeland Communications, Inc.

Page 4 of 16

Socket Radio CC-900W Datasheet Rev

Socket Radio
Ordering

Part Number CC-900W-CA CC-900W-CB CC-900W-CA5 CC-900W-CB5

Description 0 - 70° C 0 - 70° C 0 - 70° C 0 - 70° C

C = Commercial temperature I = Industrial temperature

A = On board Antenna B = MMCX connector

Blank = 3.3V power supply 5 = 5V power supply

Contact factory for special configurations.

Socket Radio
2005, Copeland Communications, Inc.

Page 15 of 16

Socket Radio CC-900W Datasheet Rev

Contact Information

Copeland Communications, Inc. 440 Colony Place Gahanna, OH 43230 Tel 614 475-1690 Fax 614 882-6062

Email Internet:

Socket Radio

Legal

Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Copeland Communications, Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Copeland Communication’s products as critical components in life support systems is not authorized except with express written approval by Copeland Communications. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.
2005, Copeland Communications, Inc.

Page 16 of 16

Socket Radio CC-900W Datasheet Rev

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CC-900W-CA Datasheet file may be downloaded here without warranties.

Datasheet ID: CC-900W-CA 506873